Bob and Carol are both observing the moon at exactly the same time. However, bob is in Miami and carol is in Los Angeles. Bob observes the moon in the first quarter phase. Carl will also observe the moon in the first quarter phase.
The moon cycle consists of four primary and secondary phases.
The four primary phases are New Moon, First Quarter Phase , Full Moon, and the Last Quarter.
During the new moon and full moon periods, there are definite chances of solar and lunar eclipses.
The secondary phases of the moon are waxing crescent, waxing gibbous, waning gibbous, and waning crescent.
In the southern hemisphere and northern hemisphere, people observe the same phases of the moon.
As Miami and Los Angeles are in the southern hemisphere i.e. south of the equator, therefore, people living in that hemisphere will observe the moon in the same phases. Thus Bob and Carol will also observe the moon in the first quarter phase from different cities.
If you need to learn more about moon click here:
https://brainly.com/question/18517840
#SPJ4
An airplane is delivering food to a small island. It flies 100 m above the ground at a speed of 170 m/s .
The distance traveled is mathematically given as
D = 766.7 m
What is the distance traveled?The airplane's horizontal velocity was measured to be 170 meters per second.
100 meters is the equivalent of the distance above the earth.
Generally, the equation for distance is mathematically given as
s = u_0t + (1/2) g t2
then, we get
(100 m) = (0.5) (9.8 m/s2) t2
[tex]t = \sqrt{(100 m*4.9 m/s2)}[/tex]
t = √20.4 s2
t = 4.51 sec
we know that,
D = vx t
D= (170 m/s) (4.51 s)
D = 766.7 m
Read more about distance
https://brainly.com/question/15172156
#SPJ1
a model sphere of diameter d is to be immersed in a water tunnel running at a speed of v in order to obtain data that can be used to predict the drag force on a weather balloon that is traveling in air at 1.5 m/s. for a model diameter of 50 mm, the measurement of the drag force on the small sphere yields 3.78 n.
The drag force on the prototype balloon is - 405 km/hr .
Given:
2-m- = diameter satellite dish
81-km/hr = Y
0.4-m- = diameter model dish.
Reynolds number is essential for this, thus,
Vm Dm/vm = VD/v
(D is the diameter of the dish)
Vm = (vm/v) (D/Dm) Y
and if vm/v = 1, then
Vm = (2/0.4) (81)
= 405 km/hr
Thus, the correct answer is - 405 km/hr
What is drag force?A mechanical force is drag. It is created when a solid body interacts with and contacts a fluid (liquid or gas). It is not produced by a force field in the sense of a gravitational field or an electromagnetic field, in which two objects can interact without coming into touch with one another.
Take the drag on a ship going through the water or the drag on a plane flying through the air. Consequently, a drag force is the resistance force brought on by a body moving through a fluid like air or water.
To learn more about drag force from the given link:
brainly.com/question/12774964
#SPJ4
How long would it take a fly to cover a 60 meter space while traveling at a speed of 5.4 m/s?
It would take a fly 11.11 seconds to cover the given distance of 60 meters.
Velocity is a term that describes the speed and direction of a point's motion. The speed at which the point is moving along its path in time is known as the magnitude of the velocity.
Velocity is a vector quantity that cannot be fully described by a number because it has direction in addition to magnitude.
Changes in an object's position are referred to as displacement. Displacement is represented by a vector. This implies that it has both a direction and a magnitude.
Given in the question
Velocity = 5.4 m/s
Distance = 60 meters
Time = Distance/Velocity
Put in the values, we get
Time = 60/5.4 seconds
Time = 11.11 seconds
Therefore, it would take 11.11 seconds for a fly to cover a 60-meter space while traveling at a speed of 5.4 m/s.
LEARN MORE ABOUT VELOCITY HERE:
https://brainly.com/question/80295
#SPJ9
.
If you want to determine the amount of water in a swimming pool what are you calculating?
A. Area
B. Volume
C. Distance
Length times width gives the surface area of the pool. Multiplying that by the average depth gives the volume in cubic feet. Since there are 7.5 gallons in each cubic foot, multiply the cubic feet of the pool by 7.5 to arrive at the volume of the pool (expressed in gallons).
Answer:
the answer is volume
Explanation:
The force between two masses m and m is 8.0 n when they are a certain distance r apart. what will the force between these two masses be if the distance between them is increased by a factor of four?
The force between two masses when the distance between those two masses is increased by a factor of four is 0.5 N
We know that,
F = G [tex]m_{1}[/tex] [tex]m_{2}[/tex] / [tex]r^{2}[/tex]
where,
F = Force
G = Constant
[tex]m_{1}[/tex], [tex]m_{2}[/tex] = Masses
r = Distance between those two forces
Given that,
F = 8 N
When the distance between those two masses is increased by a factor of four,
[tex]F^{'}[/tex] = G [tex]m_{1}[/tex] [tex]m_{2}[/tex] / [tex]( 4r)^{2}[/tex]
[tex]F^{'}[/tex] = F / 16
[tex]F^{'}[/tex] = 8 / 16 = 1 / 2
[tex]F^{'}[/tex] = 0.5 N
Force is a phenomenon which can cause an objects motion to change. It causes an object with mass to change its velocity.
Therefore, the force between two masses when the distance between those two masses is increased by a factor of four is 0.5 N
To know more about Force
https://brainly.com/question/13191643
#SPJ4
Powerful people or powerful machines are simply people or machine which always does a lot of work. is this statement true or false? explain
FALSE - Not always.
Machines can do a lot of work, but if they can't do it quickly, they aren't necessarily efficient. In fact, two machines can perform the same task (that is, do the same job), but their power ratings can differ significantly.
We know that machines are man made objects. they work by the instructions given my the people which made them. machines are effective as they can do the work more precisely and effectively but it varies from machine to machine and it depends on a lot of factors.
Machines can do a lot of work until it is workable and it does not have any malfunctioning once it stops working it is not powerful or efficient
Learn more about Machines here https://brainly.com/question/2337612
#SPJ9
A bullet is fired horizontally 0.58 meters off the ground. Assuming gravity is 9.8 m/s2, how long (t) was the bullet in the air?
Since the gravity acts on the vertical component of the velocity of the object, the bullet will spend 0.34 s in air.
What is Vertical Motion ?
Vertical motion is also known as motion under gravity. The gravity acts on the vertical component of the velocity of the object.
Given that a bullet is fired horizontally 0.58 meters off the ground. Assuming gravity is 9.8 m/s², the gravity will act on the bullet vertically.
The height h = 0.58 mThe initial velocity u = 0Using the formula h = ut + 1/2gt² we can know how long (t) was the bullet in the air.
Substitute all the parameters into the formula
0.58 = 0 + 1/2 × 9.8 × t²
0.58 = 4.9t²
t² = 0.58/4.9
t² = 0.1184
t = √0.1184
t = 0.34 s
Therefore, the bullet will spend 0.34 s in air.
Learn more about Motion Under Gravity here: https://brainly.com/question/20614605
#SPJ1
vector a has magnitude 4 m and is directed to the south. vector a has magnitude 3 m and is directed to the east. what are the magnitude and direction of s – e? a. 5 m, southeast b. 1 m, southwest c. 5 m, southwest d. 1 m, southeast
The correct option is (c) 5m southwest.
What are vectors?A quantity or phenomena with independent qualities for both size and direction is called a vector. The word can also refer to a quantity's mathematical or geometrical representation. Velocity, momentum, force, electromagnetic fields, and weight are a few examples of vectors in nature.
the vector S and E is,
S = -4m j
E = -3m i
the vector is
|S - E| = √(-4)² + (-3)²
|S - E| = 5m
Types of Vectors List
Zero Vector.Unit Vector.Position Vector.Co-initial Vector.Like and Unlike Vectors.Co-planar Vector.Collinear Vector.Equal Vector.to learn more about vectors go to -
https://brainly.com/question/25705666
#SPJ4
1. How is an electromagnet different from other magnets?
O It can repel other magnets
It has poles
It is powered by electricity
O
O It attracts iron
An electromagnet different from other magnets as it is powered by electricity.
What is electromagnet ?An electromagnet is a type of magnet where an electric current creates the magnetic field. The wire that makes up an electromagnet is typically twisted into a coil. A magnetic field is produced by a current flowing through the wire and is concentrated in the hole, designating the center of the coil.
Electromagnets have a few drawbacks, including the fact that they heat up quickly and waste a lot of electrical energy as a result. The steady magnetic field must be maintained for a continuous power supply.
to learn more about the electromagnet go to -
https://brainly.com/question/12555869
#SPJ9
wei is standing in wavy water and notices the depth of the waves varies in a periodic way that can be modeled by a trigonometric function. he starts a stopwatch to time the waves.
The function of wavy water is D(t) = 33.5 +21.5cos(2π/3·(t -1.1))
What are wave functions?In quantum physics, a wave function is a mathematical representation of the quantum state of a standalone quantum system. The probabilities for potential outcomes of measurements performed on the system may be calculated from the wave function, which is a complex-valued probability amplitude.
The function can be ...
D(t) = A +Bcos(C(t-p))
where A is the average depth (55+12)/2 = 33.5 cm,
B is the peak deviation from average, 55 -33.5 = 21.5 cm,
C is the horizontal scale factor (2π/T) = (2π/3) for a period (T) of 3 seconds,
and p is the phase offset, given as 1.1 seconds.
the function -
D(t) = 33.5 +21.5cos(2π/3·(t -1.1))
to learn more about wave functions go to -
https://brainly.com/question/28447288
#SPJ4
Use Ohm's Law to calculate the following:
a) The voltage required to produce a current of 2A in a 12ohms resistor.
b) The voltage required to produce a current of 0.1A in a 200ohms resistor.
c) The current produced when a voltage of 12V is applied to a 10ohms resistor.
d) The current produced when a voltage of 230V is applied to a 10ohms resistor.
Ohm's Law is a formula used to determine how voltage, current, and resistance in an electrical circuit relate to one another.
Use Ohm's Law to calculate the following:
a) The voltage required to produce a current of 2A in a 12ohms resistor.
To scientists, Einstein's Relativity equation (E = mc2) is as fundamental as Ohm's Law (E = IR).
E = I x R
The difference in electric potential between two points, which is defined as the work required per unit of charge to move a test charge between the two points, is known as voltage, electric potential difference, electric pressure, or electric tension.
The formula reads voltage = current x resistance, or V = A x, or volts = amps x ohms.
Therefore, Voltage required = 2 * 12 = 24 volts
To know more about Voltage, click on the link below:
https://brainly.com/question/12648660
#SPJ9
which theory best explains color vision in humans? question 23 options: 1) the trichromatic theory 2) the opponent-process theory 3) both the place theory and the frequency theory 4) both the opponent-process theory and the trichromatic theory
Both the trichromatic and opponent-process theories are valid in explaining colour vision in humans.
What is trichromatic theory?According to the trichromatic theory, our ability to perceive red, green, and blue hues as well as the cones' ability to change the neuronal activity ratio when different colors are present (Like a projection T.V.). The precise hue that we see is therefore determined by the ratio of each color to the others.
This hypothesis was developed as a result of color mixture tests in which it was discovered that a combination of three primary colors could match any hue. In the latter part of the seventeenth century, Newton's studies of light and colors sparked the first scientific interest in color.
Learn more about trichromatic theory
https://brainly.com/question/11705305
#SPJ4
the equation is the position of a particle in space at time t. find the particle's velocity and acceleration vectors. then write the particle's velocity at as a product of its speed and direction.
The particle's velocity at as a product of its speed and direction is equal to 10 . [tex](\frac{8}{10},0,\frac{6}{10} )[/tex]
What is velocity?Velocity is the directional speed of a moving item as an indication of its rate of change in position as seen from a specific frame of reference and measured by a specific time standard (e.g., 60 km/h northbound). The idea of velocity is crucial in kinematics, the part of classical mechanics that explains the motion of bodies.
A physical vector quantity called velocity requires both magnitude and direction to be defined. Speed is a coherent derived unit that expresses the scalar absolute value (magnitude) of velocity. Its quantity is expressed in SI units (metric system) of metres per second (m/s or ms1). For example, "5 meters per second" is a scalar while "5 meters per second east" is a vector.
The particle's velocity is the derivative of its position. The particle's acceleration is the derivative of its velocity. You can calculate the velocity and acceleration as follows:
[tex]\vec{v}(t)=\frac{d r}{d t}=\frac{d}{d t}(8 t+5) \vec{i}+\frac{d}{d t}\left(8 t^2-2\right) \vec{j}+\frac{d}{d t}(6 t) \vec{k}=8 \vec{\imath}+16 t \vec{j}+6 \vec{k}[/tex]
[tex]\vec{a}(t)=\frac{d v}{d t}=\frac{d}{d t}(8) \vec{i}+\frac{d}{d t}(16 t) \vec{j}+\frac{d}{d t}(6) \vec{k}=0 \vec{i}+16 \vec{j}+0 k[/tex]
The velocity at t = 0 is [tex]\vec{v}(0)=8 \vec{i}+0 \vec{j}+6 k[/tex]
if the speed at t = 0 is [tex]||\vec{v}(0)||[/tex] = 10 then the velocity at t = 0 can be written as a product of the speed at t = 0 & the direction at t = 0 is
[tex]\vec{v}(0)=\|\vec{v}(0)\| \frac{\vec{v}(0)}{\|\vec{v}(0)\|}=10 \cdot\left(\frac{8}{10}, 0, \frac{6}{10}\right)[/tex]
Learn more about Velocity
brainly.com/question/80295
#SPJ4
Full question
The equation r (t) = (8t + 5)i + (8t^2 - 2)j + (6t )k is the position of a particle in space at time t. Find the particle's velocity and acceleration vectors. Then write the particle's velocity at t equals 0 as a product of its speed and direction. What is the velocity vector?
check if
v^{2} = u^{2}+2as is dimensionally correct
Using dimensional analysis; L²/T⁴ = 2 * L²/T⁴
Thus, v² = u² + 2as is dimensionally correct.
What is dimensional analysis?Dimensional analysis is the process whereby the various quantities of measurement are expressed in their basic unit or the fundamental units from which they are derived.
The fundamental units which are used in dimensional analysis is done is:
mass expressed as Mlength expressed as Ltime expressed as TTo check if v² = u² + 2as is dimensionally correct:
unit of v = m/s = L/T
unit of u = L/T
unit of a = L/T²
s = L
(L/T)² = (L/T)² + L * L/T²
L²/T⁴ = L²/T⁴ + L²/T⁴
L²/T⁴ = 2 * L²/T⁴
The expression, v² = u² + 2as is dimensionally correct.
Learn more about dimensional analysis at: https://brainly.com/question/26397751
#SPJ1
millikan determined the charge on the electron by studying the static charges on oil drops falling in an electric field. a student carried out this experiment using several oil drops fo
1.60×10⁻¹⁹ charge on the electron by studying the static charges on oil drops falling in an electric field
Solving :
Look at the charge differences between the droplets :
A->B: 1.55 x 10⁻¹⁹C
B->C: 1.66 x 10⁻¹⁹C
C->D: 1.501 x 0⁻¹⁹C
The charge difference between the droplets is essentially the same from one droplet to the next. This must mean that there is a one particle difference between each drop (i.e. one additional electron for each drop)
On average, the charge difference is 1.55 x 10⁻¹⁹C, which is very close to the currently accepted value of 1.60 x 10⁻¹⁹C.
What was the aim of Millikan's oil drop experiment?
The Mil likens Oil Drop Experiment was an experiment performed by Robert A. Millikan and Harvey Fletcher in 1909 to live the charge of an electron. This experiment proved to be very crucial within the physics community.
Learn more about charge difference :
brainly.com/question/25923373
#SPJ4
Question 2 (1 point)
An object starts at rest and accelerates to a velocity of 8 m/s in
a period of 4 s. What is the acceleration of the object?
m/s²
Answer:
2m/s²
Explanation:
acceleration it the change in velocity over the time taken
6. a stuntman is launched vertically into the air from a cannon and eventually falls back to the ground, landing in the cannon exactly where he started. he reached a maximum height of 22 meters in 3.4 seconds and fell back to the ground in 7.6 seconds. the average velocity of the stuntman is 0 m/s, and the average speed of the stuntman is.
Answer:
w
Explanation:
Sokol
a scuba diver makes a slow descent into the depths of the ocean. his vertical position with respect to a boat on the surface changes several times. he makes the first stop 8.0 m from the boat but has a problem with equalizing the pressure, so he ascends 3.0 m and then continues descending for another 10.0 m to the second stop. from there, he ascends 7.0 m and then descends for 14.0 m, ascends again for 6.0 m and descends again for 12.0 m, where he makes a stop, waiting for his buddy. assuming the positive direction up to the surface ( ĵ), express his net vertical displacement vector (in m) in terms of the unit vector ĵ. (express your answer in vector form.)
Net vertical displacement vector (in m) in terms of the unit vector is D=−49 j
D=49
What is displacement vector?
A displacement is a vector in geometry and mechanics that has a length equal to the shortest distance between a point P's initial and final positions.
Therefore,
a scuba diver makes a slow descent into the depths of the ocean. his vertical position with respect to a boat on the surface changes several times. he makes the first stop 8.0 m from the boat but has a problem with equalizing the pressure, so he ascends 3.0 m and then continues descending for another 10.0 m to the second stop. from there, he ascends 7.0 m and then descends for 14.0 m, ascends again for 6.0 m and descends again for 12.0 m, where he makes a stop, waiting for his buddy. assuming the positive direction up to the surface ( ĵ), express his net vertical displacement vector (in m) in terms of the unit vector ĵ. (express your answer in vector form.)
D=−49 j
D=49
To learn more about displacement vector from the givne link:
https://brainly.com/question/12006588
#SPJ4
An appliance is rated at 4500 volt-ampere, 240 volts, single-phase. what is the maximum size fuse permitted?
the maximum size of fuse permitted in a single phase is 18.75 ampere.
POWER = amount of energy transferred per unit time.
Power = voltage x current
power = 4500 volt-ampere
voltage = 240 volt
current = power/voltage
= 4500/240
= 18.74 ampere
the maximum size of fuse permitted in a single phase is 18.75 ampere.
To know more about power,
https://brainly.com/question/18347542
#SPJ1
Assuming constant velocities if a fastball pitch is thrown at 40m/s toward home plate 18m away and the head of the bat is simultaneously traveling toward the ball at 18.0m/s how much time elapses before the bat hits the ball
The time elapse before the bat hits the ball is 0.3 s
Given:
Speed of ball = 40m/s
Speed of bat = 18m/s
Now, let's take the sum of the speed of ball and bat relative to each other.
v = 40 + 18.0 = 58.0 m/s
To calculate the time lapse, use the formula given below.
t = d/v
Here d = 18 m i.e. the initial distance between the ball and the bat
v = 58.0 m/s
After substituting the values we'll get
t = 18/58 = 0.31 s
t = 0.3 s
Hence the time that elapses before the bat hits the ball is 0.3 s.
If you need to learn more about time click here:
https://brainly.com/question/24662469
#SPJ4
Two gases are contained in gas bulbs connected by a valve. Gas a is present in a 1 liter bulb at a pressure of 818 torr. Gas b exerts a pressure of 328 torr in a 1 liter bulb. The valve is opened and the two gases come to equilibrium. What is the partial pressure of gas a expressed after equilibrium?.
The partial pressure of gas expressed after equilibrium is 409 torr.
Which gas is used for bulbs?Incandescent light bulbs are usually filled with argon, which is a common gas. It prolongs bulb life by keeping the tungsten filaments from decaying too quickly. Lighting also makes use of other gases like helium, neon, nitrogen, and krypton.Incandescent lights are what gas lamps are. They generate heat by burning fuel like propane, white gas, or kerosene, and the heat drives light production from the mantles. The mantles, which are made of a ceramic mesh, contain the lantern's flame.The first kind of gas employed, argon, is a gas that is typically found in incandescent light bulbs. Nitrogen may occasionally be added to argon gas. Halogen or xenon gas can be found in some light bulbs. Some light bulbs also include krypton gas.What is the partial pressure of gas expressed after equilibrium:
1. Write out the units given.
V1= 1 L
Ptot= 818 torr
PPB= 328 torr
V2= 1L
2. Remember= PaVa= PtotVtot
3. Add together volumes for total volumes.
1 L + 1 L= 2 liters
4. Plug in values and solve for PP of gas A.
PPA= Ptot x VA/Vtot
818 torr x 1/2 L= 409 torr
To learn more about gas bulbs, refer to:
brainly.com/question/14056446
#SPJ4
A boat takes 4.0h to travel 26 km down a river, then 5.0h to return. how fast is the river flowing
The speed of the river is 0.5 Km/hr
How do find the speed of the river?Let X be the speed of the boat.
Let Y be the speed of the river.
Downstream speed
X - Y = 4
Upstream speed
X + Y = 5
By solving, we get
2X = 9
X = 4.5 Km/hr
Y = 0.5Km/hr
To learn more about speed, refer
https://brainly.com/question/13943409
#SPJ4
if the student then moves backwards and returns to a position marked 20 meters another 7 seconds later, what is the displacement of the student from starting position?
The student returned to starting point hence the displacement is zero.
What is the displacement?The displacement refers to the distance that is covered in a specified direction. The difference between distance and displacement is that displacement is a vector quantity while distance is a scalar quantity.
If displacement is a vector quantity, it then follows that the direction must be taken into consideration when we are talking about the displacement of the body.
Looking at the fact that the student moves backwards and returns to a position marked 20 meters another 7 seconds later, it then follows that the student returned to starting point and that the displacement is zero.
Learn more about displacement:https://brainly.com/question/11934397
#SPJ1
A balance has 30N on the left-hand side and 50N on the
right hand side. What weight must be added so that.
the sides are balanced, and to which side?
A woman is pulling a trolley with a 27 N force along the 3.0 m aisle, how much work is done in pulling the cart from one end of the aisle to the other?
Answer:
Work done = 81 Nm
Explanation:
To calculate the work done by a force, we can use the following formula:
[tex]\boxed{\mathrm{Work \: done = \: Force \times Distance \: moved \: in \ direction \: of \: force}}[/tex].
In this question, we are told that the woman applies a force of 27 N to pull a trolley 3.0 m along an aisle. Using this information, as well as the formula above, we can calculate the work done:
Work done = 27 N × 3.0 m
= 81 Nm
Therefore, 81 Nm (or 81 Joules) of work was done pulling the cart from one end of the aisle to the other.
J. J. Thomson used a cathode-ray tube to calculate the charge-to-mass ratio of the electron. Which of these suggested the presence of a negative particle?.
J. J. Thomson used a cathode-ray tube to calculate the charge-to-mass ratio of the electron. The deflection of cathode rays towards the positively charged surface and emission of green light at the far end of the tube confirmed that they are negatively charged particles.
In 1897, J.J Thomson performed a cathode ray tube experiment to determine the charge-to-mass ratio of electrons.
Due to high voltage, a beam of particles was allowed to flow from the negatively charged end to the positively charged end of the tube.
One end of the tube was painted with phosphorous. When electrons struck the wall a green spark was observed which confirmed the presence of negatively charged particles i.e. electrons.
To put it simply, cathode rays came from the cathode tube and deflected towards a positively charged plate showing that they are negatively charged particles.
If you need to learn more about cathode rays click here
https://brainly.com/question/25879572
#SPJ4
infrared radiation has wavelengths ranging from about 800 nm to 1 mm. what is the frequency of radiation of wavelength 960 nm? answer in units of s−1 .
The frequency of radiation of the given wavelength is 3.125×[tex]10^{14}[/tex] Hz.
What is wavelength ?
Given λ = 960nm
f=c/λ
f= 3×[tex]10^{8}[/tex]/960×[tex]10^{-9}[/tex]
f= 3.125×[tex]10^{14}[/tex]
A waveform signal's wavelength is defined as the separation between two identical points (adjacent crests) in adjacent cycles as the signal travels through space or along a wire. This length in wireless systems is typically expressed in meters (m), centimeters (cm), or millimeters (mm).
The wavelength is the separation between two wave crests, while troughs have the same wavelength. The number of vibrations that pass over a specific place in a second is known as the frequency and is expressed in cycles per second (Hz) (Hertz).
To learn more about wavelength from the given link:
brainly.com/question/13533093
#SPJ4
Four toy cars are moving at a constant speed until they experience an unbalanced force of 12 n each. which toy car would have an acceleration of 3 m/s2 ? responses the car with a mass of 4 kg the car with a mass of 4 kg the car with a mass of 36 kg the car with a mass of 36 kg the car with a mass of 8 kg the car with a mass of 8 kg the car with a mass of 24 kg
Answer:
4 kg
Explanation:
F = ma
m = f/a = 12 N / 3 m/s^2 = 4 kg
2. A small 30-kilogram canoe is floating downriver at a speed
of 2 m/s. What is the canoe's kinetic energy?
a. 32 J
c. 120 J
b. 60 J
d. 900 J
What is the object’s position at t=2 s? And does the car change direction? If so at what speed?
The direction of the car will not change and the speed of the car at time of 2 seconds will be 4 m/s.
What is speed?
The size of the change in an object's position over time or the size of the change in that object's position per unit of time makes the speed of an object, also known as v in kinematics, a scalar number. The instantaneous speed is the upper limit of the average speed as the duration of the time interval gets closer to zero.
According to the question,
Initial Speed, u is 12 m/s,
Time, t at 2 seconds and,
acceleration is -4 m/s².
Now by using Equation of motion :
v=u+at
v=12+(- 4 m/s²)(2 sec)
V=12-8
V= 4 m/s.
Hence, the speed of the car will be 4 m/s at time 2 seconds and the direction of the car will not change.
To get more information about speed :
https://brainly.com/question/28224010
#SPJ1