C.) Consider a project with an initial investment and positive future cash flows. As the discount rate is increased, npv increases, and the: IRR remains constant while the NPV decreases.
The internal rate of return (IRR) is the discount rate that makes the net present value (NPV) of a project equal to zero. When the discount rate is increased, the NPV of a project is likely to decrease because the future cash flows are being discounted at a higher rate. However, the IRR remains constant as it is a function of the project's cash flows and their timing, independent of the discount rate used. Therefore, option C is the correct answer, stating that the IRR remains constant while the NPV decreases. Increasing the discount rate reduces the present value of future cash flows, which leads to a lower NPV.
learn more about NPV decreases here:
https://brainly.com/question/31959712
#SPJ11
in 2021, juanita is married and files a joint tax return with her husband. what is her tentative minimum tax in each of the following alternative circumstances? use tax rate schedule, dividends and capital gains tax rates for reference. (input all values as positive. leave no answer blank. enter zero if applicable.) b. her amt base is $470,000, all ordinary income.
Juanita's TMT would be $37,700 if her AMT base was Tentative minimum tax $145,000, which includes all ordinary income. Juanita's TMT would be $139,400 if her AMT base, which consists solely of ordinary income, is $497,500.
Juanita's TMT would be $33,540 if her AMT base was $145,000, which also included $16,000 in eligible dividends. Juanita's TMT would be $134,820 if her AMT base was $497,500 and included $16,000 in eligible dividends.
Let's begin with her normal taxable income: $145,000
Restore a few deductions and exclusions that the AMT has barred: $0 (on the premise that no exemptions or deductions are prohibited) • Apply the 26% AMT rate to the resulting AMT income: $145,000 x 0.26 = $37,700 She should pay the bigger of the two sums (after deducting any possible deductions) by comparing her computed AMT bill to her ordinary tax liability.
To know more about Tentative minimum tax visit:
https://brainly.com/question/31388190
#SPJ4
which bond guarantees the contractor will proceed with the contract
The bond that guarantees the contractor will proceed with the contract is called a performance bond.
This type of bond is a form of surety that is put in place to protect the project owner in case the contractor fails to fulfill their contractual obligations. A performance bond ensures that the contractor will complete the work specified in the contract, within the agreed-upon time frame, and in accordance with all applicable laws and regulations. If the contractor fails to meet these obligations, the project owner can make a claim against the bond to recover any financial losses that they may incur. Performance bonds are often required for large construction projects, as they provide a level of protection for all parties involved in the project.
To know more about performance bond visit:
https://brainly.com/question/14088585
#SPJ11
Laura purchases $2,000 of Candace Stock and $3,000 of Parker Stock. If Candace's volatility is 0.2, Parker's volatility is 0.7, and the correlation between Candace and Parker is 0.4, what is the volatility of Laura's overall portfolio? Enter your answer as a decimal and show 4 decimal places.
The portfolio's volatility, combining Candace and Parker stocks, is approximately 0.5213.
To calculate the volatility of Laura's overall portfolio, we need to consider the individual volatilities of Candace and Parker stocks as well as their correlation. The formula for calculating the portfolio volatility is:
Portfolio Volatility = √(w1² * σ1² + w2² * σ2² + 2 * w1 * w2 * ρ * σ1 * σ2)
Where:
- w1 and w2 are the weights of Candace and Parker stocks in the portfolio, respectively.
- σ1 and σ2 are the volatilities of Candace and Parker stocks, respectively.
- ρ is the correlation between Candace and Parker.
In this case, Laura has invested $2,000 in Candace Stock and $3,000 in Parker Stock. The weights of Candace and Parker stocks in the portfolio are calculated as follows:
Weight of Candace Stock (w1) = $2,000 / ($2,000 + $3,000) = 0.4
Weight of Parker Stock (w2) = $3,000 / ($2,000 + $3,000) = 0.6
Plugging the given values into the formula, we have:
Portfolio Volatility = √((0.4² * 0.2²) + (0.6² * 0.7²) + (2 * 0.4 * 0.6 * 0.4 * 0.2 * 0.7))
Calculating the above expression, we find:
Portfolio Volatility ≈ 0.5213
Therefore, the volatility of Laura's overall portfolio is approximately 0.5213.
To learn more about portfolio refer here:
https://brainly.com/question/17165367
#SPJ11
a. an assets excess return over the past day b. an assets return relative to the s&p 500 c. an assets excess return over a given look back period d. an assets excess return relative to its sector
Option C, an asset's excess return over a given look-back period, refers to the difference between the asset's return and a benchmark's return during a specified period.
An asset's excess return over a given look-back period, as mentioned in option C, is a measure of the asset's performance relative to a benchmark over a specific period of time. This measure calculates the difference between the asset's return and the return of the benchmark during the chosen look-back period.
The excess return is used to evaluate the asset's performance in excess of a benchmark. It helps assess whether the asset has outperformed or underperformed the benchmark during the specified time frame. This comparison is valuable for investment analysis and portfolio management, as it provides insights into the asset's relative strength or weakness.
The look-back period can vary depending on the specific analysis and investment strategy. It can be a daily, monthly, quarterly, or annual period, among others. The excess return over this defined period indicates how the asset has performed compared to the benchmark over that particular time frame.
By analyzing an asset's excess return over a given look-back period, investors can gain insights into the asset's relative performance and make informed decisions regarding portfolio allocation and investment strategies.
Learn more about asset, below:
https://brainly.com/question/14826727
#SPJ11
When the real exchange rate of a country's currency is low, the home country will: find it easier to export, while domestic residents will buy more imports O find it harder to export, while domestic r
When the real exchange rate of a country's currency is low, the home country will find it easier to export, while domestic residents will buy more imports.
A low real exchange rate means that the domestic currency has depreciated in value relative to foreign currencies. This makes the country's exports relatively cheaper for foreign buyers. As a result, foreign consumers are more likely to purchase goods and services from the home country, leading to increased exports. omestic residents will find imported goods relatively more expensive due to the low real exchange rate. This, in turn, encourages domestic consumers to reduce their purchases of imports and instead opt for domestically-produced goods. As a result, imports are likely to decrease.
Learn more about real exchange rate here:
https://brainly.com/question/28272902
#SPJ11
Service level is:
OA. something that should be minimized in retail.
OB. calculated as the cost of an overage divided by (the cost of shortage+ the cost of overage) for single-period models.
OC. the probability of not stocking out.
OD. the probability of stocking out.
OE. B and D
Option B and D are correct in the context of single-period models. In such models, service level is calculated as the cost of an overage divided by the sum of the cost of shortage and the cost of overage. This formula helps in determining the optimal order quantity, where the cost of overage is balanced with the cost of shortage.
Service level is a term that is commonly used in supply chain management and inventory control. It refers to the level of service that a company provides to its customers, in terms of product availability. In other words, service level is the probability of a product being available for a customer when they need it. This means that if a company has a high service level, it is more likely to meet customer demand and have a positive impact on customer satisfaction. On the other hand, a low service level may result in lost sales and unhappy customers.
In conclusion, service level is a crucial aspect of supply chain management and should be maintained at an optimal level to ensure customer satisfaction and business success.
To know more about chain management visit:-
https://brainly.com/question/31376387
#SPJ11
Select the term that best fits the scenario.
Garret is an undergraduate looking for a job to pay for college. As Garret seeks employment, he is glad to know that he will be paid at least $7.25 per hour.
Oblack market
O license
O quota
O price ceiling
O price floor
The term that best fits the scenario is: Price floor In the given scenario, Garret is glad to know that he will be paid at least $7.25 per hour.
This indicates that there is a minimum wage requirement set at $7.25, which acts as a price floor. A price floor is a government-imposed minimum price that is set above the equilibrium price in a market. It ensures that workers receive a certain minimum wage for their labor.
The other options mentioned, such as black market, license, and quota, do not relate directly to the scenario described. A black market refers to illegal or unregulated economic activities, a license refers to a legal permission or certification, and a quota refers to a restriction on the quantity of goods or services that can be produced or imported. None of these terms align with the context of Garret seeking employment and being guaranteed a minimum wage.
To learn more about price floor, visit here
https://brainly.com/question/14868235
#SPJ4
What happens to the supply curve when any of the following determinants change? Indicate whether each of these determinants causes a shift of the supply curve or a movement along the curve. i. Change in market price: (Click to select) ii. Change in factor productivity: (Click to select) iii . Change in producer expectations: (Click to select) iv. Change in the price of other goods: (Click to select) v. Change in technology: (Click to select) vi. Change in resource prices: (Click to select) vil. Change in taxes: (Click to select)
When any of the determinants mentioned above change, it can either cause a shift of the supply curve or a movement along the curve.
What happens in every case?A change in market price, for instance, causes a movement along the curve as suppliers adjust their output to match the new price.
A change in factor productivity, on the other hand, causes a shift in the supply curve as it affects the cost of production and, consequently, the amount suppliers are willing to produce at each price level. Similarly, changes in producer expectations, the price of other goods, technology, resource prices, and taxes can all cause either a shift in the supply curve or a movement along the curve depending on the magnitude and direction of the change.
These determinants can significantly impact the supply of goods and services in the market, and businesses must be aware of them to stay competitive and profitable.
To know more on supply curve visit:
https://brainly.com/question/14925184
#SPJ11
according to the nasaa model rules for sales of securities at financial institutions, a networking arrangement between a financial institution and a broker-dealer must:
According to the NASAA (North American Securities Administrators Association) Model Rules for sales of securities at financial institutions, a networking arrangement between a financial institution and a broker-dealer must meet certain requirements, which typically include:
Agreement: There must be a written agreement between the financial institution and the broker-dealer outlining the terms and conditions of the networking arrangement.
2. Disclosure: The financial institution must disclose to customers that the products and services offered by the broker-dealer are separate from those provided by the financial institution. This disclosure should inform customers that the broker-dealer's products are not insured by the FDIC or any other federal agency, nor guaranteed by the financial institution.
3. Customer Consent: Prior to engaging in any securities transactions, the customer must provide their informed written consent. This consent should acknowledge that the financial institution and the broker-dealer are separate entities, and the customer is aware that the broker-dealer's products are not bank deposits and may involve investment risk.
4. Supervision: The financial institution must establish reasonable policies and procedures to supervise the activities of the broker-dealer and its registered representatives to ensure compliance with applicable securities laws and regulations.
It's important to note that specific requirements may vary between jurisdictions, so it's advisable to consult the relevant securities regulatory authority or legal counsel to understand the exact rules and regulations in a particular jurisdiction.
Learn more about Customer here:
https://brainly.com/question/31192428
#SPJ11
cultural barriers can impede acceptance of products in foreign countries. T/F
True. Cultural barriers can pose significant challenges to the acceptance of products in foreign countries. Every country has its unique cultural, social, and religious values, which shape consumer behavior and preferences. Therefore, businesses need to understand and adapt their products to the local cultural norms to increase their acceptance and success. Failure to do so can lead to misunderstandings, confusion, and mistrust among consumers, leading to low sales and poor market penetration.
Some common cultural barriers that businesses face include language, taste, dietary restrictions, religious beliefs, and cultural taboos. To overcome these barriers, businesses should conduct thorough market research, collaborate with local partners, and customize their products to meet the local consumers' needs and preferences.
To know more about Cultural barriers visit :-
https://brainly.com/question/30468933
#SPJ11
SG&A in a medium to large sized company would typically include the costs of all of the following departments except:
a. Accounting Department
b. Legal Department
c. Overhead
d. Marketing Department
SG&A (Selling, General, and Administrative) expenses in a medium to large sized company typically include the costs of all departments mentioned except for overhead.
SG&A expenses represent the operating expenses incurred by a company that are not directly related to the production of goods or services. These expenses encompass various departments and functions necessary for the overall management and administration of the company. The accounting department, legal department, and marketing department are typically considered part of the SG&A expenses as they are directly involved in supporting the company's operations and growth.
The accounting department handles financial reporting, bookkeeping, and financial analysis, which are crucial for the company's financial management. The legal department handles legal matters, including contract drafting, compliance, and risk management. The marketing department is responsible for promoting the company's products or services, conducting market research, and developing marketing strategies.
Learn more about expenses from here:
https://brainly.com/question/31107679
#SPJ11
what is the incremental cost incurred if the company increases production and sales from 31,000 to 31,001 units? (round your answers to 2 decimal places.)
The incremental cost incurred by the company to increase production and sales from 31,000 to 31,001 units needs to be calculated, rounded to 2 decimal places.
To determine the incremental cost, we need to consider the additional cost incurred when producing and selling one additional unit. Incremental cost is often associated with variable costs, which change in direct proportion to the level of production or sales. If we have the information about the variable cost per unit, we can calculate the incremental cost for one additional unit.
However, since the specific variable cost per unit is not provided, we cannot determine the exact incremental cost in this scenario. It would depend on the variable cost structure of the company, including factors such as materials, labor, and other variable expenses associated with producing and selling the units. Without these details, it is not possible to calculate the incremental cost accurately. Therefore, we are unable to provide a specific numerical answer in this case.
Learn more about incremental cost from here:
https://brainly.com/question/30669434
#SPJ11
The building blocks concept is associated with which logistics function?
a. warehousing
b. packaging
c. materials handling
d. inventory management
The building blocks concept is associated with the materials handling logistics function.
What purpose does a logistic warehouse serve?
Storage and warehousing of goods are essential components of the global logistics supply chain. Having your goods stored in one central location makes it easier to plan and organise your logistics, and warehouses not only offer safe and secure storage around-the-clock.
Materials handling involves the movement, storage, and control of materials and products throughout the manufacturing, warehousing, distribution, consumption, and disposal processes. The building blocks concept refers to the use of standardized containers, pallets, and other materials handling equipment to facilitate the efficient and safe movement of goods.
Therefore, By using standardized equipment, materials handling can be streamlined, reducing the time and cost associated with moving products through the supply chain.
Learn more about logistics function from the given link.
https://brainly.com/question/30638791
#SPJ4
A financial institution has the following portfolio of over-the-counter options written on Doogle shares:
Type
Position
Delta of Option
Gamma of Option
Vega of Option
Call
750
0.855
0.147
1.600
Call
-3,500
0.640
0.220
0.150
Put
-1,000
-0.420
0.179
1.150
Call
500
0.250
0.700
0.700
A traded option is available with a Delta of 0.8, a Gamma of 1.1, and a Vega of 0.45.
i. What position in the traded option and in Doogle shares would make the portfolio both Gamma and Delta neutral?
(5 marks)
ii. Explain why a financial institution may want to keep their portfolio both Delta and Gamma neutral.
(15 marks)
iii. What position in the traded option and in Doogle shares would make the portfolio both Vega and Delta neutral?
(5 marks)
iv. If a second traded option with a Delta of 0.8, a Gamma of 1.35, and a Vega of 0.75 is available, what position in the traded option and in Doogle shares would make the portfolio Delta-Gamma-Vega neutral?
i.To achieve Gamma and Delta neutrality, short traded options (gamma of 1.1) and take a position in Doogle shares with a delta of -203.75.ii. Keeping Delta and Gamma neutral helps with risk management, volatility trading, and market-making.iii. To attain Vega and Delta neutrality, short traded options (vega of 0.45) and take a position in Doogle shares with a delta of -203.75.iv. Adding a second traded option with delta 0.8, gamma 1.35, and vega 0.75 requires shorting options for Delta, Gamma, and Vega neutrality (position in Doogle shares unspecified).
i. To make the portfolio both Gamma and Delta neutral, we need to match the gamma and delta of the portfolio with the traded option. The gamma of the portfolio is the sum of the individual option gammas:
Gamma_portfolio = (750 * 0.147) + (-3,500 * 0.220) + (-1,000 * 0.179) + (500 * 0.700) = -5.085
To make the portfolio gamma neutral, we need a traded option with a gamma of 5.085. Since the available traded option has a gamma of 1.1, we need to short (sell) approximately 4.623 traded options (5.085 / 1.1) to make the portfolio gamma neutral.
To make the portfolio delta neutral, we need to match the delta of the portfolio with the traded option. The delta of the portfolio is the sum of the individual option deltas:
Delta_portfolio = (750 * 0.855) + (-3,500 * 0.640) + (-1,000 * -0.420) + (500 * 0.250) = 203.75
To make the portfolio delta neutral, we need a position in Doogle shares with a delta of -203.75.
ii. A financial institution may want to keep their portfolio both Delta and Gamma neutral for several reasons:
1. Risk management: By maintaining a delta and gamma neutral position, the financial institution can hedge against large price movements in the underlying asset (Doogle shares). This helps to mitigate the risk of significant losses due to adverse price fluctuations.
2. Volatility trading: By neutralizing delta and gamma, the financial institution can focus on capturing profits from changes in implied volatility (vega).
They can take advantage of volatility swings without being exposed to directional risk, thereby profiting from fluctuations in options prices.
3. Market-making activities: Delta and gamma neutrality are crucial for market makers who provide liquidity in options markets. By maintaining a delta and gamma neutral position, they can ensure smooth trading and efficient pricing for market participants.
iii. To make the portfolio both Vega and Delta neutral, we need to match the vega of the portfolio with the traded option. The vega of the portfolio is the sum of the individual option vegas:
Vega_portfolio = (750 * 1.600) + (-3,500 * 0.150) + (-1,000 * 1.150) + (500 * 0.700) = 1,070
To make the portfolio vega neutral, we need a traded option with a vega of -1,070. Since the available traded option has a vega of 0.45, we need to short (sell) approximately 2,377 traded options (1,070 / 0.45) to make the portfolio vega neutral.
To make the portfolio delta neutral, we need a position in Doogle shares with a delta of -203.75 (same as in part i).
iv. To make the portfolio Delta-Gamma-Vega neutral using the second traded option, we need to consider the deltas, gammas, and vegas of the portfolio and the second traded option.
Since the information about the desired position in Doogle shares is not provided, we will focus on adjusting the traded option position.
For Delta neutrality, we need the position in the second traded option to match the delta of the portfolio, which is -203.75.
Since the second traded option has a delta of 0.8, we need to short (sell) approximately 254 traded options (-203.75 / 0.8) to make the portfolio delta neutral.
For Gamma neutrality, we need the gamma of the second traded option to match the gamma of the portfolio, which is -5.085.
Since the second traded option has a gamma of 1.35, we would need to short (sell) approximately 3.76 traded options (-5.085 / 1.35) to make the portfolio gamma neutral.
For Vega neutrality, we need the vega of the second traded option to match the vega of the portfolio, which is 1,070.
Since the second traded option has a vega of 0.75, we would need to short (sell) approximately 1,427 traded options (1,070 / 0.75) to make the portfolio vega neutral.
Please note that the position in Doogle shares is not adjusted in the above calculations, as the desired position in Doogle shares is not provided.
The adjustments mentioned only focus on the traded option positions to achieve Delta-Gamma-Vega neutrality.
To know more about Delta neutrality refer here:
https://brainly.com/question/31976847#
#SPJ11
When activity-based costing is used for internal decision-making, the costs of idle capacity should be assigned to:
a) overhead
b) products
c) labor
d) fixed costs
Activity-based costing is a method that assigns costs based on the activities that drive them, rather than just allocating them to products or services. When using this approach for internal decision-making, it is important to assign the costs of idle capacity to fixed costs.
Idle capacity refers to the resources that are not being used at their full capacity, resulting in underutilization. This can include equipment, labor, and facilities. By assigning these costs to fixed costs, managers can accurately determine the true cost of their operations and make informed decisions on how to allocate resources. In conclusion, assigning idle capacity costs to fixed costs is critical in ensuring that businesses can make effective decisions based on accurate cost information. When activity-based costing (ABC) is used for internal decision-making, the costs of idle capacity should be assigned to fixed costs. ABC is a costing method that identifies activities in an organization and assigns the cost of each activity to all products and services according to the actual consumption by each. Fixed costs are expenses that do not change with fluctuations in production levels or sales volumes. In ABC, idle capacity represents unused resources, and since it does not vary with the level of production, it should be allocated to fixed costs. By assigning idle capacity costs to fixed costs, management can accurately analyze and control these expenses, leading to improved decision-making and resource allocation.
To know more about Activity-based costing visit:
https://brainly.com/question/29310410
#SPJ11
All of the following are the primary functions of internal controls except:
Multiple Choice
Prevention.
Correction.
Detection.
Reflection
The is "Reflection." All of the other options - prevention, correction, and detection - are primary functions of internal controls. Reflection is not a recognized primary function in the context of internal controls.
Internal controls are mechanisms put in place by organizations to safeguard assets, ensure accuracy and reliability of financial information, promote operational efficiency, and comply with regulations. The primary functions of internal controls include prevention (preventing errors or fraud from occurring), correction (identifying and correcting errors or irregularities), and detection (identifying errors or irregularities through monitoring and review). These functions help ensure the integrity and effectiveness of the organization's operations and financial reporting. However, "reflection" does not align with any recognized primary function of internal controls.
Learn more about Internal controls here:
https://brainly.com/question/29737044
#SPJ11
frank received the following benefits from his employer this year. what amount must frank include in his gross income?
Frank does not need to include the $3,650 for health insurance in his gross income.
to determine the amount frank must include in his gross income, let's go through each benefit:
1. salary: frank received a salary of $72,000. this amount is fully taxable and should be included in his gross income.
2. health insurance: the value of employer-provided health insurance is generally not taxable and is excluded from gross income. 3. group term life insurance: the cost of group term life insurance coverage exceeding $50,000 is generally considered taxable income. in this case, the face value of the policy is $50,000, and frank received $2,650 in coverage exceeding that amount. he must include this excess amount in his gross income.
Learn more about Income here:
https://brainly.com/question/14732695
#SPJ11
Q:
Frank received the following benefits from his employer this year. What amount must Frank include in his gross income? Benefits Received Salary Health insurance Group term life insurance (face $50,000) Amount $72,000 3,650 2,650
FILL THE BLANK. The procedure that stiffens a joint by joining two bones is ___. This is also known as surgical ankylosis. Arthrodesis.
The procedure that stiffens a joint by joining two bones is called arthrodesis. This is also known as surgical ankylosis.
Arthrodesis involves the surgical fusion of a joint, immobilizing it and preventing any movement. This procedure is commonly performed to treat severe joint pain, instability, or deformity that cannot be adequately addressed through conservative measures. By permanently fusing the bones, arthrodesis eliminates pain caused by joint motion and provides stability. It is typically considered when other treatment options have failed or are not suitable. While arthrodesis limits joint flexibility, it can effectively relieve pain and improve overall joint function for patients who have exhausted alternative treatments.
learn more about arthrodesis here:
https://brainly.com/question/30433855
#SPJ11
GPack plc. recently announced an ordinary dividend per share of 26p. The dividend payout per share for 2017-2020 are 20p, 22p, 22p and 24p respectively. The shareholders require a return of 14 per cent. Calculate the price for this share.
To calculate the price for GPack plc. shares, we can use the Dividend Discount Model (DDM) which takes into account the expected dividends and the required return of shareholders. The formula for the DDM is as follows:
Price = (Dividend per Share / Required Return) + (Dividend per Share / Required Return)^2 + ... + (Dividend per Share / Required Return)^n + Terminal Value
The Terminal Value represents the expected future dividends beyond the last dividend available in the given data. It is calculated by dividing the next expected dividend by the difference between the required return and the expected dividend growth rate.
Let's calculate the price for GPack plc. shares:
Dividend per Share: 26p
Required Return: 14%
Dividend Growth Rate: Assuming a conservative growth rate of 2% based on the historical dividend payouts.
Using the provided dividend payouts for 2017-2020, we can calculate the Terminal Value using the expected dividend growth rate:
Terminal Value = (24p * (1 + 0.02)) / (0.14 - 0.02) = 183.43p
Now, we can calculate the price using the DDM formula:
Price = (20p / 0.14) + (22p / 0.14)^2 + (22p / 0.14)^3 + (24p / 0.14)^4 + 183.43p / (1 + 0.14)^4
Calculating the above equation will give us the price for GPack plc. shares.
Please note that this calculation assumes a constant dividend growth rate. It's important to consider other factors and perform a comprehensive analysis before making investment decisions.
Learn more about the Dividend Discount Model (DDM) and its application in valuing shares here:
brainly.com/question/28170047
#SPJ11
when calculating cash flow from operations, one should:subtract depreciation since it represents the cost of replacing worn-out after-tax profit and ignore depreciation to after-tax the depreciation tax shield from after-tax profit.
Both approaches are valid and can be used depending on the context of the analysis. Subtracting depreciation from net income gives a more accurate representation of operating cash flow while ignoring depreciation and focusing on after-tax profit provides insight into the cash flow available to shareholders and lenders.
When calculating cash flow from operations, it is important to understand the different components that go into this calculation. One common question that arises is how to treat depreciation.
Depreciation is a non-cash expense that represents the cost of replacing worn-out assets over time.
It reduces net income and, therefore, affects cash flow.
There are two ways to approach depreciation when calculating cash flow from operations.
The first approach is to subtract depreciation from net income.
This is because depreciation is a non-cash expense and does not affect cash flow.
By subtracting it from net income, we get a more accurate representation of the company's operating cash flow.
The second approach is to ignore depreciation and focus on the after-tax profit.
This is because depreciation provides a tax shield, which reduces the company's taxable income.
By reducing taxable income, the company pays less in taxes, which results in more after-tax profit.
This approach focuses on the cash flow that is available to shareholders and lenders, which is the after-tax profit.
Know more about depreciation here:
https://brainly.com/question/1203926
#SPJ11
you+borrow+$15763+to+buy+a+car.+you+will+have+to+repay+this+loan+by+making+equal+monthly+payments+for+9+years.+the+bank+quoted+an+apr+of+9%.+how+much+is+your+monthly+payment+(in+$+dollars)?+$________.
The monthly payment amount for a loan of $15,763 to buy a car, with a repayment period of 9 years and an APR of 9%, is $205.47.
To calculate the monthly payment amount, we can use the formula for calculating the monthly payment on an amortizing loan. The formula is:
[tex]M = \frac{P \cdot r \cdot (1 + r)^n}{(1 + r)^n - 1}[/tex]
Where:
M = Monthly payment
P = Principal amount (loan amount)
r = Monthly interest rate
n = Total number of payments
In this case, the principal amount is $15,763, the APR is 9%, and the repayment period is 9 years, which translates to 108 monthly payments (9 years * 12 months). First, we need to convert the APR to a monthly interest rate by dividing it by 12. So, the monthly interest rate is 9% / 12 = 0.0075.
Plugging these values into the formula, we get:
[tex]M = \$15,763 \times 0.0075 \times \frac{{(1 + 0.0075)^{108}}}{{(1 + 0.0075)^{108} - 1}} = \$205.47[/tex] (rounded to two decimal places)
Therefore, the monthly payment amount for this loan is $205.47.
Learn more about repayment period here:
https://brainly.com/question/28017765
#SPJ11
The foreign purchases effect suggests that an increase in the U.S. price level relative to other countries will:
A) increase the amount of U.S. real output purchased.
B) increase U.S. imports and decrease U.S. exports.
C) increase both U.S. imports and U.S. exports.
D) decrease both U.S. imports and U.S. exports.
The foreign purchases effect suggests that an increase in the U.S. price level relative to other countries will: B) increase U.S. imports and decrease U.S. exports. The correct option is B.
The foreign purchases effect is a concept in macroeconomics that explains how changes in relative prices between countries can affect a country's international trade. Specifically, it suggests that an increase in the domestic price level relative to foreign prices will lead to an increase in imports and a decrease in exports.
This can be understood by considering the impact of a higher domestic price level on the demand for goods and services. As prices rise in the U.S., consumers and businesses will be incentivized to seek out cheaper alternatives from abroad, leading to an increase in imports. At the same time, foreign buyers will be less likely to purchase U.S. goods and services, leading to a decrease in exports.
Overall, the foreign purchases effect highlights the importance of considering relative prices and exchange rates when analyzing international trade patterns. It also has implications for domestic policy, as efforts to stimulate economic growth through increased spending or inflation can have unintended consequences for the country's trade balance. The correct option is B.
Know more about the foreign purchases
https://brainly.com/question/31326556
#SPJ11
if stock a has a market price of $124 and stock b has a market price of $80, what investment makes sense?
The market price of a stock is only one factor to consider when deciding on an investment. It's important to also consider the company's financial health, growth potential, and overall market trends. In this case, without any additional information, it's difficult to say which investment makes more sense.
Stock A may have a higher market price, but it could also be overvalued or experiencing a temporary surge. On the other hand, stock B may be undervalued or have strong growth potential. It's important to conduct thorough research and analysis before making any investment decisions. To determine which investment makes sense between Stock A with a market price of $124 and Stock B with a market price of $80, you should consider various factors. Firstly, analyze each stock's financial health, examining metrics such as revenue, earnings, and dividend history. Secondly, assess the industry and market conditions of both companies, determining their growth potential and risks. Finally, evaluate each stock's valuation using price-to-earnings (P/E) ratios or other valuation methods. Compare these factors for both stocks and invest in the one that aligns with your financial goals, risk tolerance, and offers a more attractive valuation based on the information gathered.
To know more about investment visit:
https://brainly.com/question/29547577
#SPJ11
When undertaking analytics, why is it important to sometimes fail?
Select one:
a. analytic outcomes can be fuzzy, so without failure how would you know when you are successful
b. failure informs the approach being used by determining why something happened
c. failure allows for comparison of outcomes
d. all of the above
e. none of the above
The correct answer is (d) all of the above. It is important to sometimes fail when undertaking analytics because failure provides valuable insights into the approach being used.
Failing in analytics is an essential part of the learning process and can lead to valuable insights and improvements. Firstly, analytic outcomes can often be ambiguous or uncertain, so experiencing failure helps to define what success looks like and provides clarity on the desired outcomes. Failure informs the approach being used by highlighting what went wrong and why something happened. By understanding the reasons behind failure, analysts can adjust their methods, models, or assumptions to improve future outcomes.
Furthermore, failure allows for comparison of outcomes. By examining both successful and unsuccessful attempts, analysts can identify patterns, trends, or variables that contribute to success or failure. This comparative analysis helps refine analytical techniques and strategies. It also enables analysts to identify best practices and avoid repeating past mistakes.
Learn more about analytics from here:
https://brainly.com/question/10601805
#SPJ11
Co. A's stock currently sells for $35 per share. It just paid a dividend of 51.80 a share. The dividend is expected to grow at a constant rate of 6% in the future. What is the stock's expected price 2 years from now? 53658 539 33 $37.41 O $4019
The stock's expected price 2 years from now is $39.33.
To calculate the stock's expected price 2 years from now, we can use the Gordon growth model, which assumes a constant dividend growth rate. The formula for the expected stock price is as follows:
Expected Stock Price = Dividend / (Required Rate of Return - Dividend Growth Rate)
First, let's calculate the required rate of return. Since the required rate of return is not given in the question, we will assume it to be the same as the dividend growth rate. Therefore, the required rate of return is 6%.
Next, let's calculate the future dividend. Since the dividend is expected to grow at a constant rate of 6%, we can calculate the future dividend as follows:
Future Dividend = Dividend * (1 + Dividend Growth Rate)^Number of Years
= 51.80 * (1 + 0.06)^2
= 51.80 * 1.1236
= 58.22
Now, we can calculate the expected stock price:
Expected Stock Price = 58.22 / (0.06 - 0.06)
= 58.22 / 0.00 (since dividend growth rate and required rate of return are the same)
= Undefined
Since the expected stock price is undefined, it means that the dividend growth rate and the required rate of return are equal. In this case, the stock price remains constant. Therefore, the stock's expected price 2 years from now would be the same as the current price, which is $35.
Therefore, none of the given answer choices is correct, as the expected stock price 2 years from now is $35.
The question should be:
Co. A's stock currently sells for $35 per share. It just paid a dividend of 51.80 a share. The dividend is expected to grow at a constant rate of 6% in the future. What is the stock's expected price 2 years from now?
1. $36.58
2. $39.33
3. $37.41
4. $40.19
To learn more about Expected Stock Price, Visit:
https://brainly.com/question/31366616
#SPJ11
T/F when you are trying to sell a new product or service, you usually only have to convince one key person to make the sale.
It is false when you are trying to sell a hew product or service, you usually only have to convince one key person to make the sale. The correct option is F.
A product is an object, system, or service that is made available for consumer use based on consumer demand; it's anything that can be offered in the market to satisfy a customer's desire or need. Products are frequently referred to as merchandise in retailing, and products are purchased as raw materials and then sold as finished goods in manufacturing. A service is also considered a product.
In project management, goods are the formal definition of the project's deliverables that comprise or contribute to the achievement of the project's objectives.
Learn more about product, here:
https://brainly.com/question/22852400
#SPJ1
Which of the following is true with respect to the accounting profession's response to the demand for comparable EPS numbers?
A) The accounting profession has not responded to this demand.
B) The accounting profession has developed standardized methods for calculating EPS.
C) The accounting profession has left it up to individual companies to determine their own methods for calculating EPS.
D) The accounting profession has lobbied against the use of EPS as a measure of financial performance.
The answer is B) The accounting profession has developed standardized methods for calculating EPS.
What does it do in response too?In response to the demand for comparable EPS numbers, the accounting profession has created standardized guidelines for calculating EPS. This ensures that companies use a consistent method to calculate and report EPS, making it easier for investors and analysts to compare companies' financial performance.
However, it is important to note that companies may still have some flexibility in choosing how to present EPS figures within the guidelines.
Nonetheless, the accounting profession's response to the demand for comparable EPS numbers has been to provide a standardized framework to ensure consistency and comparability.
Hence, option b. is correct.
To know more on EPS visit:
https://brainly.com/question/29316353
#SPJ11
Which one of the following telephone interview techniques best assures that all telephones in a specified target area have an equal chance of being selected? А Plus-one dialing. B Random digit dialing. С Automated dialing. D Systematic random digit dialing
The telephone interview technique that best assures that all telephones in a specified target area have an equal chance of being selected is systematic random digit dialing (D). This technique involves selecting a random starting point within the area and then systematically selecting every nth telephone number from a list of phone numbers.
The value of "n" is chosen in such a way that it ensures that all phone numbers in the target area have an equal chance of being selected. Random digit dialing (B) is another commonly used technique in telephone surveys. However, it may not ensure that all phones in the target area have an equal chance of being selected since some phone numbers may be repeated or excluded. Automated dialing (C) refers to the use of computer programs to automatically dial phone numbers. This technique can save time and effort, but it may not guarantee equal chances of selection since some phone numbers may be excluded or not reachable.
Plus-one dialing (A) refers to the practice of adding the digit "1" before dialing a phone number to ensure that long-distance calls are placed. It is not a survey technique and does not ensure equal chances of selection.In summary, systematic random digit dialing is the most appropriate telephone interview technique for ensuring that all telephones in a specified target area have an equal chance of being selected.Which one of the following telephone interview techniques best assures that all telephones in a specified target area have an equal chance of being selected? A) Plus-one dialing, B) Random digit dialing, C) Automated dialing, or D) Systematic random digit dialing B) Random digit dialing., random digit dialing (RDD) is the best technique to ensure that all telephones in a specified target area have an equal chance of being selected because it generates random telephone numbers within a given range. This method eliminates any biases or patterns that might be present in other dialing techniques and gives each telephone number an equal probability of selection.
To know more about specified target visit:
https://brainly.com/question/20217289
#SPJ11
if fixed costs are $1,418,000, the unit selling price is $230, and the unit variable costs are $109, what is the amount of sales in units (rounded to a whole number) required to realize an operating income of $225,000?
To determine the amount of sales in units required to realize an operating income of $225,000, we need to use the contribution margin approach.
The contribution margin per unit is calculated by subtracting the unit variable costs ($109) from the unit selling price ($230):
Contribution margin per unit = Selling price per unit - Variable costs per unit
Contribution margin per unit = $230 - $109
Contribution margin per unit = $121
Next, we can calculate the number of units required to achieve the desired operating income by dividing the fixed costs and desired operating income by the contribution margin per unit:
Break-even sales (in units) = (Fixed costs + Desired operating income) / Contribution margin per unit
Break-even sales (in units) = ($1,418,000 + $225,000) / $121
Break-even sales (in units) = $1,643,000 / $121
Break-even sales (in units) ≈ 13,574
Therefore, approximately 13,574 units (rounded to a whole number) would need to be sold to realize an operating income of $225,000, considering the given fixed costs, unit selling price, and unit variable costs.
To learn more about operating income, Click here:
https://brainly.com/question/13575423
#SPJ11
T/F. Active equity portfolio management is a long-term buy-and-hold strategy.
False. Active equity portfolio management is a strategy where a portfolio manager actively selects and manages stocks to outperform a benchmark. This can involve both short-term and long-term buying and selling of stocks.
While some active portfolio managers may adopt a long-term buy-and-hold strategy, others may take a more active approach and frequently adjust their holdings based on market conditions and their outlook for individual stocks. Ultimately, the specific approach taken by an active portfolio manager will depend on their investment philosophy and the objectives of their clients.
To know more about Active equity portfolio management visit:
https://brainly.com/question/30524908
#SPJ11