Answer: 3.834
Explanation: 18*0.213
A 40.5 g sample of aluminum is cooled 7.5°C. The specific heat capacity of aluminum is
0.900 J/g°C. What is the energy change for this sample?
Two units of distance used by scientists to describe distances in space are the light-year and astronomical unit. Why do scientists use the light-year instead of Astronomical Units to measure the distances between stars?
The speed of sound is too slow.
Telescopes can measure only in light years
Distant stars can only be seen if there is light
The smaller numbers that result from measuring with larger units are easier to use
Answer:
The smaller numbers that result from measuring with larger units are easier to use .
That’s the one, good luck!
The smaller numbers that result from measuring with larger units are easier to use.
Light year is a unit of astronomical distance that measures the distance traveled by light in one year. The distance between stars can also be measured using parsecs.
The equivalent of this distance in various units is written as follows;
1 light year (ly) = 9.5 x 10¹² km = 63,240 AU1 parsec = 3.26 lyUsing light year to represent the unit of distance is more concise because big measurement can be represented easily with small numbers using this large unit.
Thus, we can conclude that the smaller numbers that result from measuring with larger units are easier to use.
Learn more here:https://brainly.com/question/803764
Which of the following explains the difference between speed and velocity?
A. Velocity has motion, and speed does not.
B. Velocity has direction, and speed does not.
C. Speed has motion, and velocity does not.
D. Speed has direction, and velocity does not.
Answer:
B. Velocity has direction, and speed does not.
Explanation:
Velocity is a vector, meaning it has both a magnitude and direction. Speed is a scalar, meaning it only has a magnitude and no direction.
If you eat food containing 1800 Calories per day, according to an advertisement
you will lose weight. A handbook says that a person uses 20,000 kJ per day, given normal waking and sleeping activities. Will the person lose weight if he or she eats food as suggested by the advertisement?
Answer:
No he or she will not lose weight
No, the person will not lose weight if they eat food containing 1800 Calories per day based on the given information.
To determine if a person will lose weight, we need to compare their calorie intake with their calorie expenditure. The advertisement suggests consuming 1800 Calories per day, which is equivalent to approximately 7536 kJ (1 Calorie = 4.184 kJ).
The handbook states that a person uses 20,000 kJ per day, which is their estimated calorie expenditure. If the person consumes 7536 kJ (1800 Calories) and expends 20,000 kJ per day, there is an energy imbalance. The person is consuming fewer calories than they are expending, resulting in a calorie deficit.
In this scenario, the person is likely to lose weight. To maintain their current weight, their calorie intake should match their calorie expenditure. However, since their calorie intake is lower than their expenditure, their body will need to rely on stored energy (fat reserves) to make up the difference. This can lead to weight loss over time.
It's important to note that weight loss is influenced by various factors, including individual metabolism, body composition, and overall health. Caloric intake should be balanced with proper nutrition and physical activity to support overall well-being. It's always advisable to consult a healthcare professional or registered dietitian for personalized guidance on weight management.
To learn more about Calories, here
https://brainly.com/question/22374134
#SPJ2
How many carbon dioxide molecules should be added to the products side to obey the law of conservation of matter?
Your answer:
A.four
B.One
C.three
D.two
Answer:
four A
Explanation:
Answer: B) One
Explanation: One carbon dioxide molecule should be added to the products side to balance the equation and obey the law of conservation of matter.
Also, just took the test. One is correct.
what is 78%
of 100? help
Answer:
78
Explanation:
You have 100%, you take 22% and get 78%
What is the mass in grams of 2.21 mole of Ca3(PO4)4?
Answer:
1105.29 grams
Explanation:
If you calculate the molar mass of Ca3(PO4)4 you'll get 500.13. Molar mass is the mass of one mole of a substance. Multiply 500.1194 by 2.21 because we have 2.21 moles to get 1105.264 grams.
The molar mass of Ca is 40.078 grams, and there are 3 of them. So 40.078 x 3 is 120.234 grams.
The molar mass of P is 30.974 and there are 4 P's, so 30.974 x 4 is 123.896 grams.
The molar mass of O is 16 grams and there are 6 of them. Again, 16 x 16 is 256 grams.
Add up 120.234 + 123.896 + 256 to get the molar mass of Ca3(PO4)4, 500.13.
In a disproportionation reaction, the disproportionate substance
A. has exactly one oxidation state.
B. has exactly two oxidation states.
C. has at least three oxidation states.
D. has either one or two oxidation states.
Answer:
The answer is C: has at least three oxidation states.
Explanation:
you're welcome
Answer:
C
Explanation:
got it right on Edge
PLZZZ help asaap plzzz I give brainliest are the following reactions a SYNTHESIS, DECOMPOSITION, COMBUSTION, SINGLE REPLACEMENT or DOUBLE REPLACEMENT reactions?
N2 (g) + 3 H2 (g)→ 2NH3 (l) ______________
2 H2(g) + O2(g--> 2 H2O(g)
Answer:
Synthesis
Explanation:
Two reactants are becoming one product, so it is a synthesis reaction.
Decomposition is the opposite, so when one molecule becomes simpler atoms.
Example: 2NaCl -> Cl2 + Na
Combustion is reaction with a product of water and carbon dioxide.
Example: CH4 + 2O2 -> CO2 + 2H2O
Single displacement is when one atom takes the place of the other.
Example: K + NaCl -> KCl +Na (where K took the place of Na)
Double displacement is like single displacement but it happens twice. Think of it like the atoms exchanging partners.
Example: HCl +NaH -> NaCl + HOH
Answer:
(i) N2(g)+3H2(g) -->2NH3(g) - When the equilibrium changes, the concentrations of all substances involved in the equilibrium must also change. For our equilibrium reaction: N2(g) + 3H2(g) ⇔ 2NH3(g) + Heat
(ii) 2 H2(g) + O2(g) --> 2 H2O(g) - Synthesis Reaction
HENCE BOTH THE REACTIONS COULD BE CLASSIFIED AS SYNTHEYIC REACTION
PLEASE DO MARK MY ANSWER AS THE BRAINLIEST..
<HOPE IT HELPS>
(10 points) A basement (with volume V) in a residence is found to be contaminated with radon coming from the ground through the floor drains. The concentration of radon in the room is [Co] under steady-state conditions. The room behaves as a CSTR, and the decay of radon is a firstorder reaction with a decay rate constant of [k]. a. Now the condition changes: The source of radon is closed off but there is no ventilation. What is the equation that describes the concentration of radon in the basement with time [Ct]
Answer:
[tex]\mathbf{C_{Out} = C_o \ exp \Big [ - \Big ( \dfrac{1}{\dfrac{V}{Q} } + k \Big) t \Big ] }[/tex]
Explanation:
The equation that describes the concentration of the radon in the basement with time Ct is;
[tex]\mathbf{C_{Out} = C_o \ exp \Big [ - \Big ( \dfrac{1}{\theta} + k \Big) t \Big ] }[/tex]
where;
[tex]C_o[/tex] = concentration of the radon
[tex]C _ {Out}[/tex] = allowable radon concentration
k = decay rate constant
= theoretical detention
t = time needed to lower the radon concentration
The theoretical detention [tex]\theta =\dfrac{V}{Q}[/tex]
∴
[tex]\mathbf{C_{Out} = C_o \ exp \Big [ - \Big ( \dfrac{1}{\dfrac{V}{Q} } + k \Big) t \Big ] }[/tex]
47.4 grams of calcium carbonate (CaCO3) is dissolved in 450 mL of water. What is the molarity of this aqueous solution?
Answer:
[tex]M=1.05M[/tex]
Explanation:
Hello!
In this case, since the formula for the calculation of molarity is defined in terms of moles and volume in liters as shown below:
[tex]M=\frac{n}{V}[/tex]
Whereas the moles are computed by considering the molar mass of CaCO3 (100.09 g/mol):
[tex]n=47.4g*\frac{1mol}{100.09g}=0.4736mol[/tex]
Thus, we obtain:
[tex]M=\frac{0.4736mol}{0.450L}\\\\M=1.05M[/tex]
Best regards!
Natural Phenomena that cause climate change
(Need at least 2)
Answer:
1. The Earth's orbit around the Sun is an ellipse, but it does change shape. ...
The tilt in the axis of the Earth is called its obliquity
Explanation:
2.Volcanic eruptions pump out clouds of dust and ash, which block out some sunlight.
what are three things that are considered a chemical change
Answer:
Color change, precipitation, bubbling
Explanation:
Chemical change changes the chemical composition and undergoes a process in which it results as a new substance.
The Water Cycle: Lesson
Mckenze Jelks
Which example best shows how the water cycle carries on energy transfer?
Choose the correct answer.
O a flooding river depositing silt on a floodplain
O a warm ocean current warming the air above it
O ocean water depositing sand particles on a shore
O water seeping through the soil and dissolving salts
Why is HCI a strong acid and HCIO a weak acid?
Strong Acid: dissolves and dissociates 100% to produce protons (H+) 1. seven strong acids: HCl, HBr, HI, HNO3, H2SO4, HClO4, & HClO3 2. ... Weak Acid: dissolves but less than 100% dissociates to produce protons (H+) 1.
The French Le Surete included an ex-criminal, Vidocq, who put together files describing the individual modus operendi, or the _____, of each criminal.
criminal behaviors
fingerprints
home addresses
relatives who were also criminals
Answer:criminal behavior
Explanation:
Edge 2021
Answer:
Criminal Behavior
Explanation:
Convert 8.876 × 10^12 m^2 to units of km^2.
Answer:
[tex]8.876\times 10^{18}\ km^2[/tex]
Explanation:
In this problem, we need to convert [tex]8.876 \times 10^{12}\ m^2[/tex] to km².
We know that,
1 km = 1000 m
⇒ 1 km² = 10⁶ m²
So,
[tex]8.876 \times 10^{12}\ m^2=8.876 \times 10^{12}\times 10^6\ km^2\\\\=8.876\times 10^{18}\ km^2[/tex]
So, [tex]8.876 \times 10^{12}\ m^2[/tex] is equal to [tex]8.876\times 10^{18}\ km^2[/tex].
What does "X" represent in the following symbol?
80
Х
35
Answer:bromine
Explanation:
explain how the particles of a substance change as a substance changes from a solid to a liquid to a gas.
Answer:
Some substances can change from the solid state to the gas state without ever becoming a liquid. During this process, known as sublimation, the sur- face particles of the solid gain enough energy to become a gas.When dry ice becomes a gas, it absorbs thermal energy from water vapor in the air.
Explanation:
The Chinese first began recording astronomical observations about 2,000 years ago.
True
False
Here is the reaction of carbamic acid and ammonia to form an amide and water. There is a scheme of a reversible reaction where carbamic acid reacts with ammonia to give water and an unknown compound. Carbamic acid is H2NCOH with an oxygen atom attached to the carbon atom by a double bond. Ammonia is a nitrogen atom with three H atoms attached. Water is HOH. Draw the amide product of this reaction.
Answer:
See explanation
Explanation:
I have attempted to show the sequence of the reaction between carbamic acid and ammonia to form an amide and water and urea.
The reaction first involves the protonation of ammonia to give ammonium carbamate.
When ammonium carbamate is heated to 130-140 degrees, we obtain urea and water as the final products of the reaction
Many popular brands of toothpaste contain about 1.00 mg of fluoride per gram of toothpaste. The fluoride compound that is most often used in toothpaste is sodium fluoride, NaF, which is 45% fluoride by mass. How many milligrams of NaF are in a 250.0 g tube of toothpaste
Answer:
Mass of NaF in 250 g tube of toothpaste = 100 mg of NaF
Explanation:
Mass of fluoride per gram of toothpaste = 1 mg
From the given data, the fluoride compound that is most often used in toothpaste is sodium fluoride, NaF, which is 45% fluoride by mass, mass of sodium fluoride per gram of toothpaste can be determined as follows:
1 mg of fluoride per gram of toothpaste = 45% total mass of NaF per gram of toothpaste
100% mass of NaF in toothpaste = 100/45 * 1 mg = 2.22 mg of NaF.
Therefore, mass of NaF per gram of toothpaste is 2.22 mg.
The mass of NaF in 250 g of toothpaste is then calculated below:
In 250 g of toothpaste, mass of NaF = 250 * 2.22 mg = 99.9 mg of NaF
g) How many grams of aluminum (Al) are present in 2.98 mol of Al?
h) How many moles of Br are there if the sample contained 5.6 x 1024 atoms of Br?
Answer:
26.982 g
i think so..........
a reaction vessel contains a small piece of magnesium metal and air (20%) of which is oxygen gas. The mixture is ignited and burns with a burst of light and heat, producing solid magneisum oxide. The mass of mgO, however, is less than the initital mass of magnesium and oxygen combined. What loss of mass
Answer: see below
Explanation:
Mg burning in air gives MgO and a smaller amount of Mg3N2
2Mg+O2=2MgO. 2*24.3+32=2*40.3
3Mg+N2=Mg3N2
Ignoring the nitride, MgO loss of mass during the reaction can be ascribed to
(1) relativistic loss as energy (too small to be measurable)
(2) During the reaction, which is strongly exothermic, a fraction f the material is blown off as tiny particles which adhere to the vessel.
The value of the rate constant for a gas phase reaction can be changed by increasing the A. temperature of the reaction vessel. B. volume of the reaction vessel. C. pressure of the reactant. D. amount of product.
Answer:
temperature of the reaction vessel
Explanation:
temperature of the reaction vessel
The value of the rate constant for a gas phase chemical reaction can be changed by increasing the: A. temperature of the reaction vessel.
What is the rate constant?In Chemistry, rate constant is typically used with rate law to tell the reaction rate or rate of a chemical reaction that is affected by activation energy.
The rate law equation.Mathematically, the rate law is given by this formula:
[tex]R = k[A]^x[B]^y[/tex]
Where:
k is the rate constant.A is the concentration of reactant A.B is the concentration of reactant B.Generally, the value of the rate constant for a gas phase chemical reaction can be changed by increasing the temperature of the vessel (container) that is used in conducting the chemical reaction.
Read more on rate constant here: brainly.com/question/24749252
2. What is the final temperature when a 32.0 g piece of diamond at 33.5°C is heated with 360 J of energy?
(Cp = 0.509
Answer:
55.6 °C
Explanation:
From the question given above, the following data were obtained:
Mass (M) of diamond = 32.0 g
Initial temperature (T₁) = 33.5°C
Heat (Q) required = 360 J
Specific heat capacity (C) of diamond = 0.509 J/gºC
Final temperature (T₂) =?
Next, we shall determine the change in temperature. This can be obtained as follow:
The final temperature can be obtained as follow:
Mass (M) of diamond = 32.0 g
Heat (Q) required = 360 J
Specific heat capacity (C) of diamond = 0.509 J/gºC
Change in temperature (ΔT ) =?
Q = MCΔT
360 = 32 × 0.509 × ΔT
360 = 16.288 × ΔT
Divide both side by 16.288
ΔT = 360 / 16.288
ΔT = 22.1 °C
Finally, we shall determine the final temperature. This can be obtained as follow:
Initial temperature (T₁) = 33.5°C
Change in temperature (ΔT ) = 22.1 °C
Final temperature (T₂) =?
ΔT = T₂ – T₁
22.1 = T₂ – 33.5
Collect like terms
22.1 + 33.5 = T₂
T₂ = 55.6 °C
Therefore, the final temperature is 55.6 °C.
Vinegar is sold as % acidity which means a weight/volume or w/v% calculation. The density of acetic acid is 1.05 g/ml and water is (effectively) 1.0 g/ml. Recollect (from CHMY121) the %w/v refers to a solution with a certain mass of additive made up to 100 mL with the addition of (in this case) water; or gramsofsolute100mLsolution The molar mass of Acetic Acid is 60.052 g/mol. What is the molarity of CH3COOH in water of a 5% acidity vinegar solution
Answer:
0.83M is molarity of the solution
Explanation:
In a 5% w/v solution of vinegar there are 5g of acetic acid per 100mL of solution. Or 50g per liter of solution. As molarity is defined as the moles of the solute (Acetic acid) per liter of solution we need to convert the 50g per liter to moles per liter using molar mass of acetic acid:
Molarity:
50g/L * (1mol / 60.052g) = 0.8326moles/L =
0.83M is molarity of the solutionhow many NaF is 4.50 mol
Calculate the mass of water produced when 7.26 g of butane reacts with excess oxygen
Answer:
11.3 g.
Explanation:
Hello there!
In this case, since the combustion of butane is:
[tex]C_4H_{10}+\frac{13}{2} O_2\rightarrow 4CO_2+5H_2O[/tex]
Thus, since there is a 1:5 mole ratio between butane and water, we obtain the following mass of water:
[tex]m_{H_2O}=7.26gC_4H_{10}*\frac{1molC_4H_{10}}{58.14gC_4H_{10}}*\frac{5molH_2O}{1molC_4H_{10}} *\frac{18.02gH_2O}{1molH_2O}[/tex]
Therefore, the resulting mass of water is:
[tex]m_{H_2O}=11.3gH_2O[/tex]
Best regards!
THE ANSWER IS
Magnesium hydroxide (Mg(OH)2): 58.33
Iron(III) oxide (Fe2O3): 159.70
Answer:
Ok, thanks?
Have a good day
Thanks for the answer ^^...yes i only commented for the points