If you add a chunk of zinc to a beaker of acid and zinc shavings to another beaker of acid, the sample with the zinc shavings will react faster. What property causes the increase in rate?.

Answer:

an oxygen atom with 8 electrons, 8 protons, and 9 neutrons

an oxygen atom with 8 electrons, 8 protons, and 9 neutrons

Explanation:

In order for atoms to be neutral, it has to have the same amount of electrons and protons

Plants are grown in soil that contains low grade ore. the plants absorb metal ions through their roots and concentrate these ions in their cells. the plants are harvested and burnt. the ash left behind contains metal compounds.

I hope this helps :)

Benzene is a Solvent

Toluene is a Solute

Octylphenol ethoxylate is a Solute

Is benzene considered a solute?

To learn more about benzene considered a solute refer to

https://brainly.com/question/24419453

#SPJ4

Answer:

Benzene is a solvent.

Toluene is a solute.

Octylphenol ethoxylate is a solute.

Explanation:

With the exclusion of the first four features that are shared by all three classes of large molecules. They can all form strings of hundreds of repeating monomer units". Option C

This is further explained below.

Generally, A monomer is a molecule that, via a process known as polymerization, may interact with other monomer molecules to produce a longer polymer chain or three-dimensional network.

In conclusion, With the first four characteristics, which are shared by all three types of big molecules, are excluded. Each of them has the ability to create long, repeating monomer unit strings. Choice C

Read more about monomer units

https://brainly.com/question/8156064

#SPJ1

they can all form strings of hundreds of repeating monomer units".

cq

Find the feature not shared by lipids, nucleic acids, and proteins. First exclude the four features that are shared by all three classes of large molecules.

O They are all based on carbon.

O They are all made from a limited variety of different building blocks. They can all form strings of hundreds of repeating monomer units. OTheir building blocks contains H on one end and OH on the other end. They are all broken down by hydrolysis.

The physical property of both drinks that we can calculate based on the data obtained is density

The density formula and the procedure we will use is:

d = m/v

Where:

Information about the problem:

Applying the density formula, we get:

d(regular coca cola) = m(regular coca cola)/v(regular coca cola)

d(regular coca cola) = 384 g / 380 ml

d(regular coca cola) = 1.0105 g/ml

d(diet coca cola) = m(diet coca cola)/v(diet coca cola)

d(diet coca cola) = 370 g / 380 ml

d(diet coca cola) = 0.9737 g/ml

It is a physical quantity that expresses the ratio of the body mass to the volume it occupies.

Learn more about density in: brainly.com/question/1354972

#SPJ4

Answer:

Energy conversion is the process of changing one form of energy into another.

A sample of an organic compound (a nonelectrolyte) weighing 1.35 g lowered the freezing point of 10.0 g of benzene by 3.66 °c. assuming ideal solution behavior molar mass of the compound is  189 g mol⁻¹

Here given data is a sample of an organic compound which is nonelectrolyte and weighing of this compound is 1.35 g lowered the freezing point 0.0 g of benzene by 3.66 °c then we have to find molar mass of the compound=?

So here from the given data the freezing point lowering (ΔTf) is known to be 3.66 °C. also, Kf for benzene can be obtained 11.2 means (Kf = 5.12 °C/m). therefore, the equation ΔTf = Kfm can be used to find the molality of the solution. the definition of molality is moles of solute per kilogram of solvent. by using the mass of the solvent, benzene, the number of moles of solute may be found. using this information with the grams of solute, the molar mass of the organic solute may be found

ΔTf = Kfm

3.66 °C = (5.12 °C/m) × m

M=mole of solute/kg solvent=0.715

Molality=0.715 mol solute/kg solvent=0.715 m

0.715 m=x/0.010 kg benzene

Xmol=0.715 × 0.010=7.15×10⁻³mol solute

Mol=g/molar mass

7.15×10⁻³mol solute=1.350g/molar mass

Molar mass= 189 g mol⁻¹

Know more about molar mass

https://brainly.com/question/28607404

#SPJ4

Considering the definition of isotope and its notation, the correct answer is option B: the pair 12C and 14C is a pair of isotopes.

The atomic number (Z) is the total number of protons that make up the atomic nucleus of a given chemical element.

The atomic mass (A) is obtained by adding the number of protons and neutrons in a given nucleus of a chemical element.

The same chemical element can be made up of different atoms, that is, their numbers of protons are the same, but the number of neutrons is different. These atoms are called isotopes of the element.

In other words, isotopes of the same element have the same atomic number (Z) but each has a different mass number (A). This indicates that within each chemical element there are several atomic species that differ in their atomic mass.

The isotopes are located in the same place within the Periodic Table.

Isotopes of an element have the same chemical properties but differ somewhat in physical properties because they differ in atomic mass.

The notation of an isotope is given as shown in the attached image.

Considering the definition of isotope and its notation, the correct answer is option B: the pair 12C and 14C is a pair of isotopes.

Learn more about isotopes:

brainly.com/question/27407210

brainly.com/question/1598931

brainly.com/question/13255613

brainly.com/question/28312353

#SPJ1

The structure that will be formed is: 2-methyl, hexan-2-ol.

According to the query, the main chain has one distinct methyl group coming off of it. As a result, if we take away one carbon from the formula, we are left with six carbons, indicating that our structure has a six-carbon main chain.

CH₃ CH₂ CH₂ CH₂ CH₃

Additionally, it is said that we possess two tertiary alcohols. However, as the formula is C₇H₁₆O, only one more alcohol group can be added. When the functional group -OH is joined to a tertiary carbon, which is carbon with only one bond, the result is a tertiary alcohol. Since adding methyl groups and alcohol to the same carbon is the only way to convert our 6-carbon chain into tertiary alcohol, we are unable to add the -OH to either end of the chain. Therefore, in our 6-carbon chain, the 2-, 3-, 4-, or 5-carbon must receive the -OH:

CH₃-CH-CH₂-CH₂-CH₂-CH₃

         |

        OH

Our structure now comprises 6 carbons, a 6-carbon chain, and tertiary alcohol. We will extend our 6-carbon chain by one methyl group. We require a distinct methyl group that extends from the initial 6-carbon chain. We are limited to placing this methyl group on the 2-carbon. As a result, the structure we seek is:

   CH₃

        |

CH₃-C—CH₂- CH₂- CH₂-CH₃

        |

      OH

To learn more about the structure of tertiary alcohol visit the link:

brainly.com/question/28108673

#SPJ4

Answer:

When the molecules are placed in the individual wells they are all at the same distance because al the wells were created with the same comb. Gel electrophoresis is applying an electrical current to separate the molecules. Once gel electrophoresis is ran, the negative dyes will run towards the positive end of the gel and the positive dyes will run towards the negative end of the gel. The heavier dyes will run a shorter distance compared to the lighter dyes, this is how they are separated out.

Explanation:

Answer:

A situation gel electrophoresis is used in DNA fragments like in a crime scene or to distinguish species.

Explanation:

fluorine, chlorine, bromine, and iodine,

Answer:

bro you can explane why is so hard

Explanation:

The toy car that had an initial velocity of 0m/s and a final velocity of 100m/s had an acceleration of 10 m/s^2

The formula for Uniformly varied rectilinear motion (UVRM) and procedure we will use to solve this exercise is:

a = (vf - vi) /t

Where:

Information about the problem:

Applying the acceleration formula, we have:

a = (vf - vi) /t

a = ( 100 m/s - 0 m/s) / 10 s

a = 100 m/s  / 10 s

a =  10 m/s^2

It is a physical quantity that indicates the variation of velocity as a function of time, it is expressed in units of distance per time squared e.g.: m/sec^2 ; km/h^2

Learn more about acceleration at: brainly.com/question/14344386

#SPJ4

The desired output of this system which involves a bicycle for transportation is the bicycle forward motion.

This is defined as the process in which goods and people are moved from one location or place to another through the use of vehicle such as bicycle, motorcycle etc.

When riding a bicycle, the input is the force which is exerted on the pedal with the use of the legs and it then results in the bicycle moving forward (forward motion) and is referred to as the output which is therefore the reason why it was chosen as the most appropriate choice.

Read more about Transportation here https://brainly.com/question/27667264

#SPJ1

Carbon bond in the molecules is only taken into consideration, thus assigning the correct orbitals to molecule group, we get the Option A ethylene.

A covalent link between two carbon atoms is known as a carbon-carbon bond. The single bond, that is consisted of two electrons—one from each of the two atoms—is the most prevalent type.

One kind of hybridized orbital from each of the carbon atoms are contributing to the formation of the carbon-carbon single bond, which is also known as a sigma bond.

They have an ionic bond

A covalent link involving two C atoms is known as a carbon-carbon bond. The single bond with two electrons—one from each of the two atoms—is the most well-known type.

A single carbon atom can also make four different kinds of bonds with all the other atoms.

One double bond and two types of single bonds and a total pair of double bonds.

To know more about Carbon bond visit:

https://brainly.com/question/4704641

#SPJ4

Complete Question

Take only in consideration the carbon-carbon bond in the molecules. Assign the correct orbitals to the molecule groups. (Orbitals might be used more than once or not at all).

A) Ethylene

B) Ethane

C) Acetylene

The mass of the Copper coin is 44.9g

Given that,

q = 545.8 J ; c = 0.387 J/g°C ; ΔT = 31.4°C

To find the mass of the copper the following formula which is used to find the heat absorbed by a substance is to be used:

q = mcΔT

where
q = quantity of the heat

m = mass of the substance

c = specific heat capacity of the material

ΔT = change in the temperature

Therefore, on rearranging the formula to find the mass of copper coin we get,

m = q/cΔT

On substituting the values of q, c and ΔT we get

m = 545.8 J/(0.387 J/g°C * 31.4 °C)

On solving we get,

m = 44.9g

Therefore the mass of the copper coin is 44.9g.

To know more about specific heat capacity, click below

https://brainly.com/question/21406849

#SPJ9

1. A proper progression utilizing conversion factors would be km to feet to inches.

2. Conversion factors allow you to effectively cross out the appropriate units along each step of the problem.

3. 246,000 mm is how many Km is 0246.

4. There are 2 electrons in the s orbital, and 3 in the p orbital.

A conversion factor is a number used to convert one set of units to another set by multiplication or division. If the conversion is required, the values ​​should be equal using the appropriate conversion factor. To find the electron configuration of an atom, we first need to know how many electrons the atom has. Aluminum has an atomic number of 13, so it has 13 electrons.

The last shell after the electron configuration is called the valence shell. The total number of electrons in the valence shell is called valence electrons. The electron configuration of the aluminum shows that there are three electrons in the last shell of aluminum. Therefore the valence electron of aluminum is 3 The outermost valence shell of aluminum has three electrons. Al now has an electronic configuration similar to the noble gas neon so it can donate three electrons to form a cation.

Learn more about Conversion factors here:-https://brainly.com/question/28111828

#SPJ1

The area of the telescope lens in square feet (ft²) is 7.429×10⁻² square foot)

92903 square millimeter = 1 square foot

From the question given above, the following data were obtained:

We can obtain the area in square feet as illustrated below:

92903 square millimeter = 1 square foot

Therefore,

6.902×10³ square millimeter = (6.902×10³ square millimeter × 1 square foot) / 92903 square millimeter

6.902×10³ square millimeter = 7.429×10⁻² square foot)

Thus, the area of the lens in square foot is 7.429×10⁻² square foot)

Learn more about conversion:

https://brainly.com/question/28056327

#SPJ1

By looking at the body they can come up with an estimated time of how long it’s been without oxygen(dead).

40 Ne has 10 electrons which consist of 10 protons and 10 neutrons

Neon is a chemical element which is rare gas or noble gas as it has a stable octet electronic configuration, meaning it has 8 valence electrons in its outermost shell.

Neon belongs to group 0/VIII and period 1 of the periodic table.

An element is a substance which takes part in a chemical reaction. There are different classes of elements which includes the metals, nonmetals and the metalloids.

So therefore, 40 Ne has 10 electrons which consist of 10 protons and 10 neutrons.

Learn more about elements:

https://brainly.com/question/1379504

#SPJ1

The property that caused the sample with zinc shavings to react faster than the sample with the chunk of zinc is surface area.

The rate of a reaction is the rate at which reactants form products in a chemical reaction. There are various properties that increase or decrease the rate of reactions, which include temperature, catalyst, surface area and nature of the reaction.

In the question above, the main property that increased the rate of the reaction is surface area. Surface area is the amount of a solid reactant that is exposed. The more the surface area exposed, the faster the reaction.

The beaker of acid with the chunk of zinc is slower, because the zinc has less of its surface area exposed to the acid. In the second sample, reaction takes place on each of the zinc shavings, which will increase the rate at which products are going to form.

Learn more about zinc here:

https://brainly.com/question/21811823

#SPJ4

Answer:

It is quite known that in case of electrolyte there are no electrons. The electric current is basically due to flow of ions.

The bohr model describes that the electron is possible outside the nucleus of an atom. Electrons are negatively charged exist in orbits around the nucleus.

Because we assume that the only source of centripetal force is the nucleus's electrostatic force of attraction when we calculate the formula for a radius, energy levels, etc. Therefore, this only applies to atoms with a single electron. Repulsion caused by other electrons will also exist in multi-electron atoms.

Hydrogen atoms contain one electron, which is located outside the nucleus. With two protons, helium will also have two electrons.

The limitation with Bohr's model is that it performs admirably for atoms with just one electron, such as H or He+, but appallingly poorly for atoms with multiple electrons.

The atom of hydrogen possesses only one electron which are present outside the nucleus.

To know more about Bohr model, visit: https://brainly.com/question/18002213

#SPJ4

As water changes state, the mass of the sample changes.

The hydrogen bonds between water molecules completely dissolve when the heat is increased during the boiling process, allowing water molecules to escape into the air as gas.

The potential energy decreases as that of the liquid cools, which causes the molecules to begin to move more slowly. Ice is created when the molecules of water adhere to one another at a temperature of about 0°C. The molecules are still moving despite being in this solid state; we can't see it.

Water's molecular structure never changes, even though it can transition from a liquid state to a solid or gas state and back again.

To know more about potential energy :

https://brainly.com/question/24284560

#SPJ9

If 1.50 g of H₂C₂O₄.2H₂O were heated to drive off the water of hydration, 1.071 g of anhydrous H₂C₂O₄ would remain.

The balanced chemical equation of reaction is :

           H₂C₂O₄.2H₂O  →  H₂C₂O₄ + 2H₂O

First calculate the molecular weight of hydrated H₂C₂O₄ -

Using the molecular masses of -

O = 16 g/mol, C = 12 g/mol, and H = 1 g/mol

Total mass of compound = 126 g/mol

Molecular mass of H₂C₂O₄ = 90 g/mol

and, molecular mass of water of hydration = 36 g/mol

The percentage of H₂C₂O₄ in H₂C₂O₄.2H₂O is -

% H₂C₂O₄ = 90 g/mol = 0.714 %

                    126 g/mol

To calculate remainingIf 1.50 g of H₂C₂O₄.2H₂O were heated to drive off the water of hydration, 1.071 g of anhydrous H₂C₂O₄ would remain.

The balanced chemical equation of reaction is :

           H₂C₂O₄.2H₂O  →  H₂C₂O₄ + 2H₂O

First calculate the molecular weight of hydrated H₂C₂O₄ -

Using the molecular masses of -

O = 16 g/mol, C = 12 g/mol, and H = 1 g/mol

Total mass of compound = 166 g/mol

Molecular mass of H₂C₂O₄ = 126 g/mol

and, molecular mass of water of hydration = 36 g/mol

% H₂C₂O₄ = 126 g/mol = 0.7590

                    166 g/mol

75.90 % of 1.50 g = 0.714

To calculate remaining amount of anhydrous H₂C₂O₄,

we take percentage of anhydrous H₂C₂O₄ with the mass of hydrous compound which is heated.

71.4% of 1.50 g = 1.071 g

Therefore,

The anhydrous H₂C₂O₄ remaining is 1.071 g.

To learn more about the anhydrous compound,

brainly.com/question/25465144

#SPJ1

Answer:

What is the question?

Explanation:

This is a answer.

Answer: white blood cells

Explanation: they protect you from illnesses and diseases

H - Hydrogen

He - Helium

Li - Lithium

Be - Beryllium

B - Boron

C - Carbon

N - Nitrogen

O - Oxygen

F - Fluorine

Ne - Neon

Na - Sodium

Mg - Magnesium

Al - Aluminum

Si - Silicon

P - Phosphorus

S - Sulfur

Cl - Chlorine

Ar - Argon

K - Potassium

Ca - Calcium