QC A 3.00 -g copper coin at 25.0°C drops 50.0m to the ground. (a) Assuming 60.0% of the change in gravitational potential energy of the coin-Earth system goes into increasing the internal energy of the coin, determine the coin's final temperature. "

The sofa with a top speed of 87 mph would travel a distance of 43.5 miles to the mall 1 hour away.

Considering the sofa accelerates constantly throughout the motion,

s = ( u + v )  t / 2

s = Distance

u = Initial velocity

v = Final velocity

t = Time

v = 87 mph

t = 1 hr

u = 0

s = ( u + v )  t / 2

s = ( 0 + 87 ) 1 / 2

s = 43.5 mi

This is an equation of motion.

Therefore, the sofa would travel a distance of 43.5 miles

To know more about equation of motion

https://brainly.com/question/5955789

#SPJ1

The force on the wire will be

F = 5.46 Newton.

We have a current carrying wire in a uniform magnetic field.

We have to determine the magnitude of the magnetic force on the wire assuming the angle between the magnetic field and the current is 60.0°.

The force on the current carrying wire will be -

F = IBL sinθ

According to the question, we have -

L = 2.80 m

I = 5 A

B = 0.39 T

Therefore -

F = IBL sinθ

F = 5 x 0.39 x 2.80 x sin(90)

F = 5.46 x sin(90)

F = 5.46 Newton

Hence, the force on the wire will be

F = 5.46 Newton

To solve more questions on Magnetic field intensity, visit the link below-

brainly.com/question/13103888

#SPJ4

The magnitude of the magnetic force on the wire 5.46 N.

To find the magnetic force, the values given are:

Length A = 2.80m

Current I = 5 A

Magnetic field B = 0.390 T

Angle = 90° .

What is meant by magnetic force?

                      F =iBLsinθ Newton

Substituting the values given,

Magnetic force,

F = 5 A × 0.390 T × 2.80 m × Sin 90°

  = 5 A × 0.390 T × 2.80 m × 1

F = 5.46 N.

The magnitude of the magnetic force on the wire 5.46 N.

Learn more about Magnetic force,

https://brainly.com/question/28446452

#SPJ4

The heating effect in with the residential heat pump will be  3.2 KJ/s

Heat pump - mechanical device which convert heat from low temperature to high temperature reservoir with the use of external work.

Heating effect - it is the change of electrical energy which passes through the conductor into heat energy.

The rate of heat produced. [tex]Q_{H}[/tex] is calculated by

The coefficient of residential heat pump = 1.6

The consume of electric power = 2kw

The rate of heat produced.( [tex]Q_{H}[/tex]) =

The coefficient of performance × consume of electric power

[tex]Q_{H}[/tex] = 1.6 × 2

= 3.2 KJ/s

The heating effect in with the residential heat pump will be  3.2 KJ/s

To know more about heating effects.

https://brainly.com/question/15121447

#SPJ4

The subatomic particles that are least massive and most massive are the electron and neutron respectively.

Subatomic particles are defined as the elementary particles which make the fundamental constituents of all matter. The subatomic particles constitute the negatively charged electrons, the positively charged protons, and the neutral neutrons which do not have any charge on them.

Protons and neutrons on the other hand are made up of other elementary particles namely quarks. Subatomic particles have emerged a lot in the coming days with the construction of particle accelerators.

The electron is the least massive subatomic particle. It carries a negative charge of 1.602176634 × 10^−19 coulomb which is about 0.000548 amu.

Neutron is the heaviest subatomic particle having a mass of about 1.008 amu.

To know more about subatomic particles:

brainly.com/question/13303285

#SPJ4

Answer:

a  = 2 m/c²

Explanation:

Given:

V₁ = 2 m/s

V₂ = `12 m/s

t = 5 c

______________

a -?

Acceleration:

a = ( V₂ - V₁) / t

a = ( 12 - 2 ) / 5 = 10 / 5 = 2 m/c²

The chain on the swing should be 8.0 m long .

Centripetal Acceleration ( a ) = v ² / r ........... Eq. 1

It is given that ,

a = 21 m / s ²

v = 13 m / s

Now ,  using the values of ' a ' and ' v ' i.e. 21 m / s ² & 13 m / s respectively in Eq. 1

a =  v ² / r

21 = ( 13 ) ² / r

21 = ( 13 x 13 ) / r

r = ( 13 x 13 ) / 21

r = 8.047 m

⇒ r = 8.0 m ( rounded off to nearest tenth )

Hence , the chain on the swing should be 8.0 m long .

To learn more about Centripetal Acceleration kindly check :

https://brainly.com/question/22103069

#SPJ9

Answer:

Who knows the answer please I need the answer

The speed of the ball with respect to Dina is 0.800c.

A frame of reference is a set of reference points—geometric points whose positions are known mathematically and physically—that define the origin, orientation, and scale of an abstract coordinate system.

If a body does not continuously adjust its position in relation to its environment throughout the course of time, it is said to be at rest.

In frame S', Dina and Owen are at rest.

The speed of the ball with respect to Owen, u =0.800c

The speed of the frame S' with respect to frame S,  v = 0.600c

Distance between Dina and Owen, L(p) = 1.8 × 10¹² m

Speed of light, c = 3 × 10⁸ m/s

Therefore, the speed of the ball according to Dina is 0.800c. As Dina and Owen are in the same frame.

Learn more about the frame of reference here:

https://brainly.com/question/10962551

#SPJ4

Answer:

The speed of the electron is 0.98c, given that the rest energy of an electron is 0.511MeV and the rest energy of a proton is 938MeV, with both particles having kinetic energies of 2.00MeV.

Explanation:

A particle's total energy and the rest energy follow the laws of physics and the theory of relativity. The energy of any particle is equal to mass times the speed of the light-squared relatively.

Where;  E=γ.〖mc〗^2

γ is the ratio of total energy to rest energy of the particle.

m_0 is known as the rest mass of the particle.

Rest energy can be written as: E_0=〖m_0 c〗^2

γ=K/E_0 +1         (1)

γ=1/(√1-v^2/c^2)     (2)

Putting the values of the electron energy into equation (1):

γ=2.00MeV/0.511MeV+1

γ= 3.91 + 1

γ=4.91

From equation (2),

γ=1/(√1-v^2/c^2)

Squaring both sides of the equation,

γ^2=1/(1-v^2/c^2)

1/γ^2 =1-v^2/c^2  

v^2/c^2 =1-1/γ^2  

v/c=√1-1/γ^2    

Making v subject of the formula,

v=√1-1/γ^2 ×c    (3)

Inserting the values into Equation 3,

v=√1-1/〖4.91〗^2 ×c

v=√1-1/24.11×c

v=√0.959×c

v=0.98×c

v=0.98c

Therefore, the speed of the electron is 0.98c.

To learn more about speed of electron, click on https://brainly.com/question/28457743

#SPJ4

Explanation:

Newton second law of motion

Newton's investigations of gravity explain the truth that Jupiter has more moons than Earth.

The fact that Jupiter has more moons than Earth was first discovered by Galileo Galilei in 1610, and it was later confirmed by Newton. In addition to having more moons, it is also thought that Jupiter may be home to some of the most powerful magnetic fields in the solar system.

Every particle in the cosmos attracts every other particle with a force that is directly proportional to the product of their masses and inversely proportional to the square of the distance between their centers, according to Newton's law of universal gravitation.

Thus, the equation for universal gravity has the following structure:

[tex]{\displaystyle F=G{\frac {m_{1}m_{2}}{r^{2}}}}{\displaystyle[/tex]

where r is the distance between the centers of the two objects' masses, m1 and m2 are their respective masses, G is the gravitational constant, and F is the gravitational force acting between them.

To learn more about Isaac Newton's law of gravity, visit:

https://brainly.com/question/3681346

#SPJ4

The correct answer is; Gravity acts on all objects in the universe.

The answer above is incorrect…

Taking into account the definition of kinetic energy, the kinetic energy of a 3.50kg block with a speed of 4.00 m/s is 28 J.

Kinetic energy is defined as the energy associated with bodies that are in motion and this energy depends on the mass and speed of the body.

In other words, kinetic energy is defined as the amount of work necessary to accelerate a body of a certain mass and in a position of rest, until it reaches a certain speed.

Kinetic energy is represented by the following expression:

Ec = 1/2×m×v²

where:

In this case, you know:

Replacing in the definition of kinetic energy:

Ec = 1/2× 3.50 kg× (4 m/s)²

Solving:

Ec= 28 J

Finally, the kinetic energy of a 3.50kg block with a speed of 4.00 m/s is 28 J.

Learn more about kinetic energy:

https://brainly.com/question/25959744

#SPJ1

   The value of the acceleration of the earth toward it when it accelerates toward the earth with 9.8m/s² is a = 7.35×10-²³m/s².

  Acceleration in theoretical terms refers to the derivative of the velocity function, it is the rate of change of this variable, and the physical magnitude of the motion that gives rise to the change of position.

   Forces are the definition of Newton's second law, which is stated under the relation:

∑ Force = mass × acceleration.

  In other words, force is the origin of motion since it generates acceleration in a system.

   In this case we must complete the statement:

"A student with mass 45 kg jumps off a high diving board. Using 6. 0×1024 kg for the mass of the earth, what is the acceleration of the earth toward her as she accelerates toward the earth with an acceleration of 9. 8 m/s2 ? assume that the net force on the earth is the force of gravity she exerts on it."

  We determine the Force of the student:

F = ma

F = 45kg * 9.8m/s².

F = 441N

  Now we go to the acceleration of the earth:

a = F/m

a = 441N / 6×10²⁴ Kg

a = 7.35×10-²³m/s².

Learn more about Forces in:

https://brainly.com/question/11539787

#SPJ4

Answer:

1)  The block of wood is at rest.

2)  Weight and Normal Reaction (see attached diagram).

Explanation:

Assumptions

Question 1

"At rest" or "resting" means that the object isn't moving.

Therefore, the block of wood is at rest.

Question 2

Forces that are acting on the block of wood:

See attached diagram.

Answer:

inertia is basically the fact that something will continue moving until something else stops it.  take friction for example.  If you roll a ball on the ground, it will eventually stop because of friction, you can kind of think of it like a gear wheel.  and i guess it relates to newtons first law of motion because it is his first law?? i don't know how to answer that

Explanation:

Answer:

Sir Isaac Newton contributed significantly to the field of science over his lifetime. He invented calculus (opens in new tab) and provided a clear understanding of optics. But his most significant work had to do with forces, and specifically with the development of a universal law of gravitation and his laws of motion

Explanation:

A genius with dark secrets. Isaac Newton changed the way we understand the Universe. Revered in his own lifetime, he discovered the laws of gravity and motion and invented calculus. He helped to shape our rational world view.

Positively charged particles of radiation emitted from the decay of radioactive substances are known as alpha particles.

A helium nucleus that some radioactive compounds release that was once thought to be a ray. Ionized alpha particles are made up of two protons, neutrons ( no charge), and no electrons.

Two protons and two neutrons from the atom's nucleus combine to form the positive charge alpha particles (α). The most toxic radioactive materials, such as uranium, radium, and polonium, decay to produce alpha particles.

A ray-like emission of a helium nucleus from some radioactive materials.

More about the alpha particle link is given below.

https://brainly.com/question/2288334

#SPJ4

The wavelengths of the following quantum particles from the largest to the smallest is (d) > (a) = (e) > (b) > (c)

De Broglie's relationship is given by  [tex]\lambda=\frac{h}{mv}[/tex] .

This can be written as [tex]\lambda=\frac{h}{p}[/tex]  .....(1) where λ  is known as de Broglie wavelength and p is momentum , h = Plank’s constant .

As we know that mass of proton is greater than electron and photon .

(a)For photon , the momentum is given by [tex]p=\frac{E}{c}[/tex]     ...(2)  where c is the speed is the speed of light .

Putting E = 3eV in equation (2) , we get

              [tex]p=\frac{3\times 1.6\times10^-^1^9}{3\times 10^8} \\p=1.6\times10^-^2^7Js/m[/tex]

Putting this value of p in equation (1) , we get

  [tex]\lambda=\frac{6.62\times10^{-34}}{1.6\times10^{-27}}\\\lambda=4.13\times10^{-7}[/tex]

(b) As we know that  kinetic energy is given by

         [tex]K.E=\frac{1}{2} mv^2\\\\2K.E = mv^2\\2K.E\times m = m^2v^2\\2K.E\times m = (mv)^2\\2K.E\times m = p^2\\\\\sqrt{2K.E\times m }=p[/tex]      ...(3)

Where mass of electron is [tex]9.1\times10^-^3^1 kg[/tex] .

Putting K.E = 3eV in equation (3) , we get

    [tex]\sqrt{2K.E\times m }=p\\p=\sqrt{2\times3\times1.6\times10^{-19} \times 9.31\times10^{-31} }\\p=\sqrt{89.376\times10^{-50}} \\p=9.45\times10^{-25}Js/m[/tex]

Putting this value of p in equation (1) , we get

[tex]\lambda=\frac{6.62\times10^{-34}}{9.45\times10^{-25}}\\\lambda=0.7005\times10^{-9}[/tex]

(c) Putting [tex]m=1.67\times10^{-27}kg[/tex] and K.E = 3eV in equation (3) , we get

     [tex]\sqrt{2K.E\times m }=p\\p=\sqrt{2\times3\times1.6\times10^{-19} \times 1.67\times10^{-27} }\\p=\sqrt{16.032\times10^{-46}} \\p=4.003\times10^{-23}Js/m[/tex]

Putting this value of p in equation (1) , we get

[tex]\lambda=\frac{6.62\times10^{-34}}{4.003\times10^{-23}}\\\lambda=1.65\times10^{-11}[/tex]

(d) Putting E = 0.3eV in equation (2) , we get

   [tex]p=\frac{0.3\times 1.6\times10^-^1^9}{3\times 10^8} \\p=1.6\times10^-^2^8Js/m[/tex]

Putting this value of p in equation (1) , we get

[tex]\lambda=\frac{6.62\times10^{-34}}{1.6\times10^{-28}}\\\lambda=4.13\times10^{-6}[/tex]

(e) Putting [tex]p=3eV/c[/tex] in equation (1) , we get

    [tex]\lambda=\frac{6.62\times10^{-34}\\\times3\times10^8}{3\times1.6\times10^{-19}}\\\lambda=4.13\times10^{-7}[/tex]

On comparing the wavelength order should be (d) > (a) = (e) > (b) > (c) .

Learn more about de brogile here :

https://brainly.com/question/28165547

#SPJ4

Answer:

(1) a) S=D/T

b)5m/s

c)3.33s

(2) a) 1.104m

Explanation:

(1) b) S=D/T

 S=1500/300

 S=5m/s

c) T= V-U/a

 v=10

 u= 2

 a= 2.4

10-2=8/2.4=3.33s

(2) a) d=s×t

 0.46×2.4=1.104m



The statement about density that is true is: density is a physical property

The density of an object is the relation that exist between the mass and the space that the object occupies. The general formula of the density is:

ρ = m/v

Where:

For example if we want to know which is the density of a body that has a mass of 100g and a volume of 150 cm³, applying the density formula we get:

ρ = 100 g/150 cm³

ρ = 0.666 g/cm³

It is a physical quantity that expresses the ratio of the body mass to the volume it occupies.

Learn more about density in: brainly.com/question/1354972

#SPJ4

Considering the definition of potential energy, the mass of a rocket 5,000 m above the Moon’s surface is 10.31 kg.

Potential energy is the energy that measures the ability of a system to do work based on its position. In other words, this is the energy that a body located at a certain height above the ground has.

Gravitational potential energy is the energy associated with the gravitational force. This will depend on the relative height of an object to some reference point, the mass, and the strength of gravity. Then, the expression applied to the gravitational energy of the object is:

Ep= m×g×h

Where:

In this case, you know:

Replacing in the definition of gravitational potential energy:

84,000 J= m×1.63 m/s²×5,000 m

Solving:

84,000 J= m× 8,150 m/s²×m

84,000 J÷ (8,150 m/s²×m)= m

10.31 kg= m

Finally, the mass of a rocket 5,000 m above the Moon’s surface is 10.31 kg.

Learn more about gravitational potential energy:

brainly.com/question/15896499

brainly.com/question/28102842

brainly.com/question/14525402

brainly.com/question/24933254

#SPJ1

Answer:

490N

Explanation:

the formula to use for perpendicular force is:

now we plug in:

*for g, it can be 9.8 m/s^2 or 10 m/s^2 depending on your teacher

[tex]Fg=(100)(9.8)(cos60)[/tex]

then you get:

[tex]Fg=490N[/tex]

False.While driving downhill, the gravity will cause you to go faster and increase your stopping distance.

Brakes are suddenly applied while the body is travelling at a given speed. You would have observed that after travelling a given distance, the body stops entirely. The stopping distance is that distance.

The distance travelled between the moment the body decides to stop a moving vehicle and the moment the vehicle comes to a complete stop is known as the stopping distance. The stopping distance, indicated by the letter d, is dependent on a number of variables, including as the road's surface and the driver's reflexes.

Stopping Distance formula is given by,

[tex]d=\frac{v^{2} }{2ug}[/tex]

Where,

d = stopping distance (m)

v = velocity (m/s)

μ = friction coefficient

g = the gravitational acceleration

To learn more about stopping distance,visit:

https://brainly.com/question/24254597

#SPJ4

The potential energy stored in the spring is 0.025 J.

This is the energy stored in a spring when its is stretched or compressed through a certain length.

To calculate the potential energy stored in a spring, we use the formula below.

Formula:

Where:

From the question,

Given:

Substitute these values into equation 1

Hence, the potential energy stored in the spring is 0.025 J.

Learn more about potential energy here: https://brainly.com/question/14427111

#SPJ1

The force on each side of the loop is [tex]2.26\times10^{-4}N[/tex] away from the centre .

It is given that solenoid has 30.0 turns/cM which means we have given number of turns per unit length [tex]n=\frac{N}{L} =30\times10^{2}m[/tex] and carries a clockwise current of 15.0A .

Putting above values in equation (1) , we get

[tex]B=4\pi \times10^{-7}\times 30\times10^{2} \times15.0\\B=0.0565T[/tex]

The magnetic force exerted due to their magnetic field on the sides of the loop will be away from the center of loop and is given by equation (2) .

It is given that current in the loop is  0.200 A and length of the each side of the loop is  2.00 cm [tex]=2\times10^{_2}m[/tex] and plane of the loop perpendicular to the magnetic field of the solenoid.

Putting above values in equation (2) , we get

[tex]F=0.0565\times0.2\times2\times10^{-2}\times sin90\\F=2.26\times10^{-4}N[/tex]

Direction of force is found by Fleming' Left Hand rule which states that when the thumb, index finger and middle finger of the left hand are placed perpendicular to each other,  the thumb points in the direction of the magnetic force, the index finger points in the direction of the magnetic field, and the middle finger points in the direction of the flow.

According to Fleming's left hand rule, the magnetic force exerted due to their magnetic field on the sides of the loop will be away from the center of loop and is given by equation (2) .

Learn about solenoid more here :

brainly.com/question/15218721

#SPJ4

   The value of the acceleration of the earth toward it when it accelerates toward the earth with 9.8m/s² is a = 7.35×10-²³m/s².

  Acceleration is defined as the second derivative of displacement or the derivative of velocity:

a = d/dt(dS/dt) = dV/st.

   It is the rate of change of velocity, it generates a constant change over time.

   Forces are the definition of Newton's second law, which is stated under the relation:

∑ Force = mass × acceleration.

  In other words, force is the origin of motion since it generates acceleration in a system.

   In this case we must complete the statement:

"A student with mass 45 kg jumps off a high diving board. Using 6. 0×1024 kg for the mass of the earth, what is the acceleration of the earth toward her as she accelerates toward the earth with an acceleration of 9. 8 m/s2 ? assume that the net force on the earth is the force of gravity she exerts on it."

  We determine the Force of the student:

F = ma

F = 45kg * 9.8m/s².

F = 441N

  Now we go to the acceleration of the earth:

a = F/m

a = 441N / 6×10²⁴ Kg

a = 7.35×10-²³m/s².

Learn more about Forces in:

https://brainly.com/question/11539787

#SPJ4

The measurements by the different scientists were 1.01 m, 0.99 m and 1.00 m,  which are not exactly same as the standard value of a meter. But all the three values are very much close to each other.

Meter is a fundamental unit of length in the metric system and in the International Systems of Units (SI). It is denoted by m.

Therefore the measurements for the bar kept at the international bureau of standards taken by the three scientists were precise but not accurate.

To know more about meter,

https://brainly.com/question/14774462

#SPJ4

The five examples where pivot can be seen include the following: 1. Nut Cracker · 2. Seesaw · 3. Scissors · 4. Plier · 5. Stapler

A pivot is the fulcrum of a simple machine that serves as a point in the machine that allows for easy movement when force of load or effort is being applied at either ends.

The pivot can eithe be located at the either ends of the simple machine or at the middle of the simple machine.

Typical examples of machines that has pivot include the following:

From the examples listed above, the pivot of nutcracker and stapler are located at its end while the pivot of seesaw, scissors and pliers are located at the middle.

Learn more about simple machines here:

https://brainly.com/question/11683867

#SPJ1

The two types of potential energies which would be types of mechanical energies are elastic and gravitational.

The correct answer choice is option D

Potential energy means the energy a body possess in relation to its position. Other forms of energy include

Kinetic energy is the energy a body possesses due to its motion.

So therefore, the two types of potential energies which would be types of mechanical energies are elastic and gravitational. The correct answer choice is option D

Learn more about potential energy:

https://brainly.com/question/24933254

#SPJ1

Answer: it is d

Explanation: i took the unit test on edge