Answer:
50%
Explanation:
2326/4696 = 0.495
Can be rounded to: 0.50
50%
Answer:
50
Explanation:
just took the test :)
Which type of exercise program involves a series of exercises interspersed with rest periods?
a
circuit training
b
interval training
c
calisthenics training
d
weight training
Answer:
B) interval training
Explanation:
Interval training is a type of training in which the period of intense activity alternates with the period of active recovery. The duration and intensity of the work interval together with the duration and intensity of the recovery interval make up one series.
When planning interval training, it is necessary to determine: 1. the duration and intensity of the working interval, 2. the duration and intensity of the recovery interval, and 3. the total number of series.
Precisely because of the larger number of variables and the unlimited possibility of combinations, interval training is more efficient and interesting than continuous training.
WILL MARK BRAINLIEST PLEASE HELP AND SHOW ALL WORK
Consider the system shown in FIGURE 9-35. Assume that after the string breaks the ball falls through the liquid with constant speed. If the mass of the bucket and the liquid is 1.20 kg, and the mass of the ball is 0.150 kg, what is the reading on the scale (a) Before (b) After the string breaks?
a. 13.23 N
b. 13.2
What you need to do is use this equation:
(m1 + m2) x g
hope it helps!
which statement describes the effects of forces on an object
Answer:
Sorry this isn’t going to be any help. You don’t have any statement that I’m able to see.
Explanation:
What is the current in a copper wire if 650C of charge passes through it in 6 minutes
1. 180A
2. 18A
3. 1.8A
4. 108A
Answer:
3. 1.8A
Explanation:
Given the following data;
Quantity of charge, Q = 650C
Time = 6 minutes to seconds = 6 * 60 = 360 seconds.
To find the current l;
Quantity of charge = current * time
Substituting into the equation, we have;
650 = current * 360
Current = 650/360
Current = 1.8 Amperes
What is the average velocity of the car over the first 0.25m? ___m/s
What is the average velocity of the car over the second 0.25m? ___m/s
Answer:
first one : 0.11
second one : 0.28
Explanation:
I took the test and got it right!!!!!
I have the answer I just need it worked out, thank you.
A dry cleaner throws a 22 kg bag of laundry onto a stationary 9 kg cart. The cart and bag begin moving at 3 m/s to the right. Find the velocity of the bag before the collision. (4.2 m/s)
Answer:
Vbag = 4.22 [m/s]
Explanation:
In order to solve this problem we must use the principle of conservation of momentum. Which tells us that the momentum of a system is preserved before and after a collision.
Let's take both movements (bag and cart) as positive, since they both move in the same direction. Now everything that happens before the collision will be taken to the left of the equation and after the collision to the right of the equal sign.
[tex](m_{bag}*v_{bag})=(m_{bag}+m_{cart})*v_{final}[/tex]
where:
mbag = mass of the bag = 22 [kg]
vbag = velocity of the bag [m/s]
mcart = mass of the cart = 9 [kg]
vfinal = mass of both bodies moving together = 3 [m/s]
Now replacing:
[tex](22*v_{bag})=(22+9)*3\\22*v_{bag}=93\\v_{bag}=4.22[m/s][/tex]
PLEASE HELP Due Soon!
What are two examples of chemical energy being transformed?
Answer:
Hope I can help you.
Explanation:
Here u go here are some that you can choose from! :)
1) Air bags are activated by a chemical reaction inside the bag. A sensor turns on an electrical circuit, and then sodium azide is ignited. The reaction that occurs generates nitrogen gas, which fills the bag at an extremely rapid rate.
2) Baking soda and vinegar produce carbon dioxide gas when mixed. As this gas grows in volume, it puts pressure on whatever container it is in, and will erupt out of an opening in the container, creating a volcano effect. This chemical reaction is safe, making it a great science activity for kids.
3) Batteries have two terminals: the anode and the cathode. They're separated by an electrolyte, a chemical that allows the anode and cathode to transmit a charge. When something's connected to a battery, chemical reactions take place along the electrodes to produce electricity. Of course, you can't see the energy in the battery when the battery is just sitting around; it is when the electricity is produced that the energy is seen.
4) Explosives: when an explosive goes off, chemical energy that was stored in it is changed and transferred into sound energy, kinetic energy, and thermal energy. Just because chemical energy is being released, it doesn't mean an explosion will occur. But, when a solid material quickly changes into a hot, expanding gas, you may be looking at an explosion. Take TNT, for example. Two units of solid TNT can instantly change into 15 units of hot gas, creating a dark and sooty explosion.
5) Food: chemical energy in food is released when the food is digested and the molecules of food are broken down into smaller pieces. Our bodies digest food by mixing it with acids and enzymes in the stomach. This process turns carbohydrates into glucose. The stomach (and small intestine) then release that glucose into the bloodstream, serving as energy for our bodies.
6) Heating packs (used to warm up cold hands or soothe sore muscles) have chemicals inside them. A lot of them function by "cracking" (or bending) them. This is because they're filled with iron. Once you crack the heating pack, the iron is exposed to the air. As the iron reacts to the oxygen, it transforms into iron oxide, a chemical that can produce heat.
7) Wood, when dry, stores chemical energy. This chemical energy is released as the wood burns, and it is converted into heat, or thermal energy. This also produces light energy. As a result of burning, the wood turns into an entirely new substance - ashes.
Convert 1 second into solar day.
DIVIDE 1 BY 86400 TO CONVERT 1 SECOND INTO SOLAR DAY.
If the orbital velocity of a satellite is 2 rad/s then what will be the period of satellite.
Select one:
a. 2 sec
b. 3.14 sec
c. 6 sec
d. 8 sec
Answer:
Using the orbital velocity as deg/time or the angular speed:
1 rev / sec = 2 * pi rad / sec since there are 2 pi rad in a revolution
2 rad/sec = 1 / pi rev/sec = f from above
P = 1 / f = pi sec/rev = 3.14 sec/rev
Weight is the downward pull of
on mass. What one word completes the sentence?
The word "gravity" belongs between "of" and "on".
When two objects interact they exert forces on each other. Will these forces act in the same direction or in opposite directions?
When two objects interact, they exert forces on each other. These forces act in opposite directions.
What is Newton's third law of motion?According to Newton's third law of motion, every action has an equal and opposite reaction. As well as, the action and reaction are always acted in pairs.
When two things collide, they exert forces on one another. These forces have opposing effects.
When two objects interact, they exert forces on each other. These forces act in opposite directions.
Hence,these forces act in opposite directions.
To learn more about Newton's third law of motion, refer to the link;
https://brainly.com/question/974124
#SPJ1
density of iron is 8000kg/m cube .calculate the mass of iron is 8000kg/m cube .calculate the mass of iron contained by 5m cube of iron block
answer:
40,000 kg
explanation:density=mass/volume
then mass=density×volume
= 8000× 5
=40,000 kg
Positive and negative charged objects will affect which type of field?
• gravitational
• electric
• magnetic
Answer:
Electric
Explanation:
Because they are charged objects
Special ways that animals' bodies work to help them survive in whatev
condition they're in, such as camels in the desert conserving water and
able to go days without drinking is what type of adaptation? *
Answer:
Physiological – special ways that animals' bodies work to help them survive in whatever condition they're in, such as camels in the desert conserving water and being able to go days without drinking.
Explanation:
a.) What happens when a force is applied to an atom? b.) What is this called?
Answer:
it binds the negatively charged electrons to the positively charged atomic nucleus.
Explanation:
its called Electromagnetic Force
facts about conolizing into mars?
Mars is the focus of much scientific study about possible human colonization. Its surface conditions and the presence of water on Mars make it arguably the most hospitable of the planets in the Solar System, other than Earth. Mars requires less energy per unit mass (delta-v) to reach from Earth than any planet except Venus.
Permanent human habitation on a planetary body other than the Earth is one of science fiction's most prevalent themes. As technology has advanced, and concerns about the future of humanity on Earth have increased, the argument that space colonization is an achievable and worthwhile goal has gained momentum. Other reasons for colonizing space include economic interests, long-term scientific research best carried out by humans as opposed to robotic probes, and sheer curiosity.
One of Elon Musk's stated goals through his company SpaceX is to make such colonization possible by providing transport, and to "help humanity establish a permanent, self-sustaining colony on Mars within the next 50 to 100 years".
Many organizations support the colonization of Mars. They have also given different reasons and ways humans can live on Mars. One of the oldest organizations is the Mars Society. They promote a NASA program that supports human colonies on Mars. The Mars Society have set up Mars analog research stations in Canada and the United States. All other organizations include MarsDrive, who wants to help fund settlements on Mars, and Mars to Stay. Mars to Stay advocates settlements on Mars. In June 2012, Mars One released a statement that they believe could help start a colony on Mars by 2023.
what is the moment produced by 15n force ?
Answer:
12mA
Explanation:
6. A 55 kg skier is at the top of a slope, as shown in the illustration below. At the
initial point A, the skier is 10.0 m vertically above the final point B.
a. Set the zero level for gravitational potential energy at B, and find the gravitational
potential energy associated with the skier at A and at B. Then find the difference
in potential energy between these two points.
b. Repeat this problem with the zero level at point A
c. Repeat this problem with the zero level midway down the slope, at a height of 5.0
m.
The question mentions an illustration that is not provided, but I can solve the problem anyway.
Answer:
Ua - Ub = 5,390 J regardless of the reference height
Explanation:
Gravitational Potential Energy
Gravitational potential energy is the energy stored in an object because of its vertical position or height in a gravitational field.
It can be calculated with the equation:
U=m.g.h
Where m is the mass of the object, h is the height with respect to a fixed reference, and g is the acceleration of gravity or [tex]9.8 m/s^2[/tex].
The problem is about proving the difference in potential energy does not depend on the reference used to calculate them.
a. Let's set the zero level for gravitational potential energy at B, i.e., h=0 at B.
The m=55 kg skier is at the top of the slope (point A) at a height of h=10 m.
The gravitational potential energy Ua is:
Ua = 55 * 9.8 * 10 = 5,390 J
The gravitational potential energy Ub (h=0) is:
Ub = 55 * 9.8 * 0 = 0 J
The difference is:
Ua - Ub = 5,390 J - 0 J = 5,390 J
b. Now fix the zero level at point A (h=0).
The gravitational potential energy Ua (h=0) is:
Ua = 55 * 9.8 * 0 = 0 J
Point B is at a height h=-10 m since it's below the reference.
The gravitational potential energy Ub (h=-10) is:
Ub = 55 * 9.8 * (-10) = -5,390 J
The difference is:
Ua - Ub = 0 J - (-5,390 J) = 5,390 J
We get the same value.
c. Finally, fix the reference at the midpoint between A and B.
Point A is at a height h=5 m since it's 5 m above the reference.
The gravitational potential energy Ua is:
Ua = 55 * 9.8 * 5 = 2695 J
Point B is at a height h=-5 m since it's 5 m below the reference.
The gravitational potential energy Ub is:
Ub = 55 * 9.8 * (-5) = -2695 J
The difference is:
Ua - Ub = 2695 J - (-2695 J) = 5,390 J
Again, we get the same value.
Conclusion:
Ua - Ub = 5,390 J regardless of the reference height
An ice cream maker has a refrigeration unit which can remove heat at 120 Js'. Liquid ice
cream, of mass 0.6kg at a temperature of 20 °C, is added to the container.
container
refrigeration
unit
(a) Calculate how much energy must be removed from the mixture to cool it to its
freezing point of -16°C.
(Specific heat capacity of ice cream = 2100 J kg 1 °C')
Answer:
The amount of heat energy that must be removed from the mixture to cool it to its freezing point, of -16°C is 45,360 J
Explanation:
The given parameters for the refrigeration unit and the ice cream are;
The power of the refrigeration unit = 120 J/s
The mass of the liquid ice cream, m = 0.6 kg
The initial temperature of the liquid ice cream, T₁ = 20°C
The freezing point temperature of the ice cream, T₂ = -16°C
The specific heat capacity of the ice cream, c = 2,100 J/kg⁻¹·°C⁻¹
The amount of heat energy that must be removed from the mixture to cool it to its freezing point, ΔQ, is given as follows;
ΔQ = m × c × ΔT
Where;
ΔT = T₁ - T₂
∴ ΔQ = m × c × (T₁ - T₂)
Therefore, by substituting the known values, we have;
ΔQ = 0.6 × 2,100 × (20 - (-16)) = 45,360
The amount of heat energy that must be removed from the mixture to cool it to its freezing point, of -16°C = ΔQ = 45,360 J.
4. When a ray of light is incident at a critical angle in denser medium, the angle
of refraction in rarer medium is
A 0°
B 45°
C 90°
D 180°
Answer:
C. 90°
Explanation:
The critical angle is that angle of incidence in the dense medium where the angle of refraction is 90°.
In this case, light travels from the more optically dense medium to the less optically dense medium.
When the angle of incidence in the dense medium is equal to the critical angle, the angle of refraction is 90°.
Look at the pic please
Answer:
your answer is B) i hope this helps you and have a good day.Two objects are dropped in vacuum chamber from the same height: a marble and a bowling ball. Which of the following are true? (Mark two answers)
The bowling ball will accelerate faster
After 1 second both objects will have the same acceleration
In a vacuum objects can't move
Both objects will reach the ground at the same speed
The marble will remain in the air longer
Answer:
After one second both objects will have the same acceleration
Both objects will reach the ground at the same speed
Explanation:
Because a vaccum chamber is a free fall place
what is fuse short answer
Answer:
Its a fuse.
Explanation:
The maximum displacement of an oscillatory motion is A=0.49m. Determine the position x at which the kinetic energy of the particle is half it's elastic potential energy
Answer:
The position x, is ± 0.4 m.
Explanation:
The total mechanical energy of the oscillatory motion is given as;
[tex]E_T = U +K.E\\\\E_T = \frac{1}{2} kA^2\\\\ \frac{1}{2} kA^2 = U +K.E\\\\K.E = \frac{1}{2} kA^2 - U ----equation(1)[/tex]
When the kinetic energy (E) is half of the elastic potential energy (U);
[tex]K.E = \frac{U}{2} ----equation(2)[/tex]
Equate (1) and (2)
[tex]\frac{U}{2} = \frac{1}{2} kA^2 - U\\\\U = kA^2 -2U\\\\U+2U = kA^2\\\\3 U = kA^2\\\\3(\frac{1}{2} kx^2) = kA^2\\\\\frac{3}{2} x^2=A^2\\\\x^2 = \frac{2}{3} A^2\\\\x = \sqrt{\frac{2}{3} A^2} \\\\x = A\sqrt{\frac{2}{3} } \\\\x = 0.49\sqrt{\frac{2}{3} }\\\\x = + /- (0.4 \ m)[/tex]
Thus, the position x, is ± 0.4 m.
According to the law of conservation of energy, which changes would
increase the total energy of a system?
A. An addition of 400 J of GPE and a loss of 250 J of thermal energy
B. An addition of 100 J of thermal energy and a loss of 450 J of
kinetic energy
C. An addition of 200 J of kinetic energy and a loss of 250 J of
thermal energy
D. An addition of 300 J of thermal energy and a loss of 450 J of
kinetic energy
Answer:
Correct option is (a)
Explanation:
According to conservation of energy: Total energy of system remains conserved or we can say total energy = constant
(a) 400J of GPE is added and 250J of thermal energy is lost
⇒ Total energy = 400-250 J = 150 J
hence, 150J energy is increased
(b) 100J of thermal energy is added and 450J of kinetic energy is lost
⇒ Total energy = 100-450 J = -350 J
hence, 350J energy is decreased or lost by system
(c)200J of kinetic energy is added and 250J of thermal energy is lost
⇒ Total energy = 200-250 J = -50 J
hence, 50J energy is decreased or lost by system
(d)300J of thermal energy is added and 450J of kinetic energy is lost
⇒ Total energy = 300-450 J = -150 J
hence, 150J energy is decreased or lost by system
Therefore, correct option is (a)
Explanation:
According to conservation of energy: Total energy of system remains conserved or we can say total energy = constant
(a) 400J of GPE is added and 250J of thermal energy is lost
⇒ Total energy = 400-250 J = 150 J
hence, 150J energy is increased
(b) 100J of thermal energy is added and 450J of kinetic energy is lost
⇒ Total energy = 100-450 J = -350 J
hence, 350J energy is decreased or lost by system
(c)200J of kinetic energy is added and 250J of thermal energy is lost
⇒ Total energy = 200-250 J = -50 J
hence, 50J energy is decreased or lost by system
(d)300J of thermal energy is added and 450J of kinetic energy is lost
⇒ Total energy = 300-450 J = -150 J
hence, 150J energy is decreased or lost by system
Therefore, correct option is (a)
An object that is falling through the air will feel"weightless because:
Answer: its B
Explanation:
If an object has zero acceleration, does that mean that its velocity is zero? Give an example.
Answer:
Yes, an object that was set in motion in the past by some force, but that is no longer being acted on by a net force, is moving but with zero acceleration, i.e. it is moving at constant velocity. For example, a puck sliding along a horizontal plane of ice after being hit with a hockey stick.
EM waves consist of changing electric and magnetic fields moving perpendicular with respect to each other. What kind of wave is it?
-Transverse waves
-Longitudinal waves
-Mechanical waves
-Compressional waves
Answer:
Transverse
Explanation:
Electromagnetic waves don't depend on the medium they travel through like a mechanical wave does, so they aren't mechanical. They don't oscillate (move back in forth) in the direction they travel either, ruling out compressional and longitudinal waves.
That leaves tranverse waves, the ones we're most used to, since they look very "wavelike," with smooth peaks and valleys. Electromagnic waves behave like these, oscillating in a plane perpendicular to the direction they're traveling in.
I’ll literlly give you points
and make you brainiest
Answer:
a
Explanation:
Water exists as ice, water or steam. (a) Complete the sentences. Choose the answers from the box. ice steam water The particles are arranged in a regular pattern in ____________________ . The particles are close together but not in a pattern in ____________________ . The particles move quickly in all directions in ____________________ .
Explanation:
The options are; Ice Steam and Water.
The state of matter associated with the options are;
Ice - Solid
Steam - Gas
Water- Liquid
The particles are arranged in a regular pattern in ____________________
Among all the state of matter, the particles are closely packed and in an ordered manner is observed in the solid state - Ice
The particles are close together but not in a pattern in ____________________
In the liquid state of matter, the particles are not as tightly bounded as that of the solid. Hence they are able to still move around a bit. - Water
The particles move quickly in all directions in ____________________
The particles of the gaseous state move in all directions colliding with each other and the walls of the container. - Steam