Answer:
D. In orderly patterns and fized positions
Explanation:
Find the density of a 720.0 g block of Titanium with these dimensions: L = 10.0 cm, W = 8.0 cm, H = 2.0 cm
1000 cm3 of Helium has a mass of 178.5 grams. What is the density of Helium gas?
Answer:
The answer is 0.18 g/cm³Explanation:
The density of a substance can be found by using the formula
[tex]density = \frac{mass}{volume} \\ [/tex]
From the question we have
[tex]density = \frac{178.5}{1000} \\ = 0.1785[/tex]
We have the final answer as
0.18 g/cm³Hope this helps you
What is the temperature of someone with a fever? Select the better estimate.
40°F
40°C
Answer:
40°C
Explanation:
THIS S VERY HIGH FEVER
AS 40°C = 104°F
The movement of air caused by differences in air pressure is __________________.
Answer:
wind
Explanation:
it would be naturally caused by the pressure
Answer:
temperature or pressure differences
Explanation:
can someone help me identify the elements please, i rlly need help
Answer:
1 : any of more than 100 substances that cannot by ordinary chemical means be separated into different substances Gold and carbon are elements. 2 : one of the parts of which something is made up There is an element of risk in surfing. 3 : the simplest principles of a subject of study the elements of arithmetic.
Explanation:
A 7.0 liter balloon at room temperature contains helium gas. if the temperature is halved, what happen to the volume?
The volume = 6.71 L
Further explanationCharles's Law
When the gas pressure is kept constant, the gas volume is proportional to the temperature
[tex]\tt \dfrac{V_1}{T_1}=\dfrac{V_2}{T_2}[/tex]
V₁=7 L
T₁=25 °C(room temperature) + 273 = 298 K
T₂=12.5(halved) + 273 = 285.5 K
[tex]\tt \dfrac{V_1}{T_1}=\dfrac{V_2}{T_2}\\\\\dfrac{7}{298}=\dfrac{V_2}{285.5}\\\\V_2=6.71~L[/tex]
Which list contains only animal phyla? mosses, annelids, conifers, chordates mosses, ferns, conifers, flowering plants cnidarians, mollusks, annelids, arthropods, echinoderms, chordates cnidarians, ferns, annelids, arthropods, echinoderms, flowering plants
Answer:
cnidarians, mollusks, annelids, arthropods,
Explanation:
Living organisms have been grouped using a system of classification that runs from Kingdom to Species. One of those kingdoms is KINGDOM ANIMALIA, which consists of animal species i.e. organisms that are strictly heterotrophic and eukaryotic.
The next taxa after kingdom is PHYLA. According to this question, the phyla which consists of only animals are cnidarians, mollusks, annelids, arthropods. Other options contain ferns, mosses, and flowering plants which belong to Kingdom Plantae.
Answer:
on edge its C
Explanation:
¿Por qué un trozo de sal común es frágil y se puede romper fácilmente cuando se le somete a una fuerza y no ocurre lo mismo con un trozo de metal que se deforma antes de romperse?
Answer:
Explanation:
La sal común es un compuesto iónico, es decir que sus átomos (Na y Cl) están unidos entre sí por fuerzas electrostáticas, y el metal está unido entre sí por uniones metálicas. La naturaleza de estas uniones es diferente y en base a las fuerzas de atracción que hay entre los átomos en compuestos con este tipo de uniones, la propiedades físicas generales serán diferentes.
En el caso de los metales, los átomos metálicos están colocados unos sobre otros de forma ordenada, pero no fijamente retenida, y los electrones de valencia están delocalizados a través de todo el cristal metálico. Por esta razón, cuando se le aplica una fuerza a un metal, estos átomos pueden deslizarse unos sobre otros. Ésta es la propiedad que le da a los metales su maleabilidad.
En el caso de los compuestos iónicos, los aniones y cationes que lo componen están ordenados en el cristal de una forma más rígida y por eso cuando se les aplica una fuerza éstos compuestos se rompen mucho más fácil, ya que no pueden deformarse.
i have the most potential energy if i am
Answer:
travel the world in one day
what are chiral carbon
Answer:
A chiral carbon is a carbon bonded to four different groups ( four groups as carbon forms four bonds). The molecules formed are non superimposible on its mirror image.
NH4, C032. OH", and PO43- are all examples of
Answer:
the popultion of it
Explanation:
NH₄+ , (CO₃)₂- , OH- , (PO₄)₃- are all examples of polyatomic ions.
What are Polyatomic ions?A covalent bound type of collection of two or more atoms or of a metal complex that can be said as behaving as a single unit and that has a net charge which is not zero is referred to as a polyatomic ion or a molecular ion.
Depending on the terminology , a polyatomic ion may or may not be referred to as a molecule. The Greek word poly- that means "many," although even ions made of just two atoms are frequently referred to be polyatomic.
A polyatomic ion may also be referred to as a radical (or less commonly, as a radical group).
The term "radical" today refers to a variety of free radicals, which are species with an unpaired electron and do not require a charge.
The hydroxide ion, which has the chemical formula OH- and is made up of one oxygen and one hydrogen atom and has a net charge of 1, is a straightforward example of a polyatomic ion.
A nitrogen atom, four hydrogen atoms, and a charge of +1 make up an ammonium ion, which has the chemical formula NH₄+.
In the context of acid-base chemistry and the production of salts, polyatomic ions are frequently helpful.
A polyatomic ion is frequently thought of as the conjugate base or acid of a neutral molecule. For instance, the polyatomic hydrogen (H₂) sulphate anion (SO₄) is the conjugate base of sulfuric acid (H₂SO₄). The sulphate anion (SO₄)₂ is created when another hydrogen ion is eliminated.
To know more about the similar questions on 'polyatomic ion'
visit- https://brainly.com/question/16843545
#SPJ2
1 point
What would 140000000.0 be in scientific notation?
a. 1.4 x10-8
b. 1.4 x108
c. 14 x10-7
d. 14 x107
Answer:
B
Explanation:
you're moving the decimal 8 spots to the left so it can only be B
A gas occupies a volume of 0.444 L at 0.00C and
79.00 kPa. What is the final Kelvin temperature when
the volume of the gas is changed to 1880. mL and the
pressure is changed to 38.70 kPa?
Include unit of measurement and use proper
significant figures.
Answer:
The final temperature is 566°K
Explanation:
Given
V1 = 0.444L
T1 = 0.00°C
P1 = 79.00 kPa
V2 = 1880mL
P2 = 38.70 kPa
Required
Determine the final temperature of the gas
To answer this, we make use of idea gas law equation.
This is:
(P1V1)/T1 = (P2V2)/T2
Convert V1 to mL
V1 = 0.444L
V1 = 0.444 * 1000mL
V1 = 444mL
Convert T1 to Kelvin
T1 = 0.00°C
T1 = 0.00 + 273K
T1 = 273K
Substitute these values in the given equation.
(P1V1)/T1 = (P2V2)/T2
(79 * 444)/273 = (38.70 * 1880)/T2
35076/273 = 72756/T2
Cross Multiply
35076 * T2 = 273 * 72756
35076T2 = 19862388
Make T2 the subject
T2 = 19862388 ÷ 35076
T2 = 566K (approximated)
Hence, the final temperature is 566°K
The diagram is a model of one way that materials move into a cell.
Which Sentence explains what happens in last step?
A. a vacuole carries particles into the cell
B. The cell membrane surrounds particles outside the cell.
C. Phospholipids in the cell membrane allow particles to pass through
D. Transport proteins push particles out of cell.
Answer:
B. The cell membrane surrounds particles outside the cell.
Explanation:
The last step is when the cell membrane completely surrounds particles outside the cell.
This process is often known as endocytosis.
endocytosis is the process whereby a cell ingests materials by engulfing them using the cell membrane. In this process, the cell membrane completely covers the food.Fluorine (F) and bromine (Br) are in the same group on the periodic table. How do atoms of these elements compare when they form bonds?
Both a fluorine atom and a bromine atom lose one electron, and both atoms become stable.
A fluorine atom becomes stable by losing one electron, but a bromine atom cannot become stable by losing only one electron.
Both a fluorine atom and a bromine atom gain one electron, and both atoms become stable.
A fluorine atom becomes stable by gaining one electron, but a bromine atom cannot become stable by gaining only one electron.
Answer:
Both a fluorine atom and a bromine atom gain one electron, and both atoms become stable.
Explanation:
The two elements compare when they form bonds in that when both a fluorine atom and a bromine atom gain one electron, they both become stable.
Fluorine and bromine are elements called halogens. They both belong to group 7 on the periodic table. When they gain an electron each, they become isoelectronic with a corresponding noble gas. This gives their atom special stability.Answer:
3) Both a fluorine atom and a bromine atom gain one electron, and both atoms become stable
Explanation:i got it right on the quiz
hope this helps
Which of the following is TRUE about when two atoms form a bond? a. Repulsion is greater than attraction b. Neither atoms will have a full valence shell c. Potential energy is at a minimum
Answer:
b: Neither atoms will have a full valence shell
Explanation:
I think sooo
For the following problems, identify the substance as either an element, a compound, or a mixture. Write E for Element, C for compound, and M for mixture. 34. Silicon ___E__ 35. Salad dressing __M___ 36. Table Salt (NaCl) __C___ 37. Oatmeal with apples and raisins_____ 38. Lithium _____ 39. Copper Sulfate (CuSO4) _____
Answer:
Explanation:
34. E
35. M
36. C
37. M
38. E
39. C
What is the term that refers to the rate of change in an object’s velocity?
Group of answer choices
momentum
acceleration
force
speed
Answer: Acceleration
Explanation:
Acceleration. The rate of change of an objects velocity is essentially the derivative of the velocity which is acceleration
HELP!!!!!! WILL MARK BRAINLIEST!!!
Fill in the blank.
Atoms are held together in molecules by _______.
_______ are compounds with the same chemical formula but different molecular structures.
A/An _______ indicates the ratio of atoms in a molecule.
_______ are similar to molecular formulas but show how atoms are bonded together.
When two atoms of the same element combine to form a molecule, this is called a _______ molecule.
The breaking and forming of bonds between atoms in substances results in changes in the _______ contained in the substances.
Respond to the following based on your reading.
Give two purposes for the systematic naming of chemicals.
Name the elements in the molecule H2SO4 and tell how many atoms of each element are present.
How many molecules are represented by 3CO2?
Answer:
1. Covalent Bond
2. Isomers
3. Molecular and Empirical Formula
4. The Structural Formula
5. Diatomic Molecules
1. Hydrogen and Tetraoxosulphate. There are 2 atoms of hydrogen and 4 atoms of tetraoxosulphate.
Explanation:
Sorry, I wrote all I know
method used to separate ethanol from propanol
can someone tell me how I find the atomic radius of atoms and what they are. Thank youuuuuuuuu
Answer:
The radius of an atom can only be found by measuring the distance between the nuclei of two touching atoms and then halving that distance. Measuring the atomic radii of chemical elements is a complicated task as the size of an atom is of the order of 1.2×10-10 m. The electron cloud forming the shell of an atom does not have any fixed shape which makes it difficult to determine the atomic size of an atom. So we can say that practically we cannot determine the size of an individual atom.
Atomic Radius:
Atomic radius is the distance from the center of the nucleus to the outermost shell containing electrons.
Explanation:
What mass of ethanol will release 410.0 J of heat when it cools
from 32.2°C to 19.1°C?
The specific heat of ethanol is 2.44 J/gºC.
12.8 g
(Don’t have explanation but it is right on CK-12)
A high school chemistry teacher asks four student groups to determine the number of protons, neutrons, and electrons (respectively) present in an ion of Titanium (Ti 2+). Which student group provides the best answer?
Answer:
Electrons - 20
protons - 22
neutrons - 26
Explanation:
Titanium has an atomic number of 22 indicating that the neutral atom has 22 protons.
Ti 2+ has lost two electrons and contains only 20 electrons, 22 protons.
The mass number of titanium is 48. Hence;
Mass number = atomic number + number of neutrons
Since the atomic number is 22 and the mass number is 48
number of neutrons = 48 - 22 = 26 neutrons
:answer question number 10
Answer:
the last one
Explanation:
I'm pretty sure
Answer:
Particles on each are constantly moving (the last one)
The repeating subunits that are responsible for the chance of a crystal are know as
unit cells
heavy nuclei
light electrons
amorphous cells
What does “like dissolves like” mean?
a
solvents dissolve chemicals with the same color (ex. both are green)
b
solvents dissolve chemicals made by the same company (ex. both made by Dow)
c
solvents dissolve chemicals with the same polarity ( ex. both are polar)
d
solvents dissolve chemicals with the same size (ex. both are 3 inches)
Answer:
c solvents dissolve chemicals with the same polarity ( ex. both are polar)
Explanation:
Like dissolves like is one of the central rule that guides the solubility of one substance in another.
It fully suggests substance having the same nature as in polarity-wise will dissolve one another. For example, water is a polar liquid, it will dissolve table salt because it i also polar. Water cannot dissolve oil because oil is non-polar.HELP ASAP
Describe the function of Cytokinesis in the cell cycle.
a copper ore contains 3.00% of copper carbonate, CuCO3, by mass. Which mass of copper would be obtained from 1 tonne of the ore?
A 1.91kg B 3.71kg C 15.3kg D 58.4kg
Answer:
(c) 15.39 kg of copper present in 1tonne of ore.
Explanation:
We are given that ore contains 3% of copper carbonate
1tonne = 1000kg
3% of copper carbonate in 1000kg of ore will be
= [tex]\frac{3}{100}*1000[/tex] = 30kg
30 kg of copper carbonate is present in ore
CuCO3 has 63.5g of cupper present in it
molar mass of CuCO3 = 123.5
so the percentage of copper present in CuCO3
= [tex]\frac{63.5}{123.5}*100[/tex] = 51.3% of copper present per kg CuCO3
Now
amount of copper present in 30kg of CuCO3
= [tex]\frac{51.3}{100}* 30[/tex] = 15.39kg
15.39 kg of copper present in 1tonne of ore
The mass of copper obtained from 1 tonne of the ore is 15.4 kg
The copper ore has 3% of copper carbonate by mass.
The mass of copper carbonate in 1 tonne of the ore can be calculated below.
1000 kg = 1 tonne
Therefore,
mass of copper carbonate = 3 /100 × 1000 = 30 kg
atomic mass of copper = 63.5 g
molar mass of CuCO₃ = 123.55 g
123.55 g of CuCO₃ gives 63.5 g of copper
30, 000g of CuCO₃ will give ? of copper
cross multiply
mass of copper = 30,000 × 63.5 / 123.55
mass of copper = 1905000 / 123.55 = 15418.8587616 g
mass of copper = 15418.8587616 / 1000 ≈ 15. 4 kg
read more: https://brainly.com/question/1237330?referrer=searchResults
5. What do the data in your graphs tell you? Explain in one or two sentences what trend the reader should observe in each of your graphs. (Science Lab Report, if you don't know what the answer is please don't answer-)
Answer:
Graphs are a common method to visually illustrate relationships in the data. The purpose of a graph is to present data that are too numerous or complicated to be described, and If the data shows pronounced trends or reveals relations between variables, a graph should be used.
Explanation:
literally bro i had the same answer for my actual project for edge
Answer: Graphs are a common method to visually illustrate relationships in the data. The purpose of a graph is to present data that are too numerous or complicated to be described, and If the data shows pronounced trends or reveals relations between variables, a graph should be used.
Explanation:
Balance the following reaction. A coefficient of "1" is understood. Choose the option "blank" for the correct answer if the coefficient is "1."
C3H8 + O2 → CO2 + H2O
Answer:
Hope this helps!
Explanation: