Answer:
The following subsections explain the explanation according to the particular circumstance.
Explanation:
The boiling point seems to be the temperature beyond which the working fluid as well as the boiling phase would be at a predetermined pressure or voltage at equilibrium among one another and. The vapor or boiling temperature of 1,1 difluoroethane seems to be -25oC at 1 atm, although as a gas it can remain at a higher temperature around -24oC.Ice packs are used to make things cold or to add cold to an injury. Some people use insulated cups to keep things like coffee warm. How are these cups different from an ice pack? How might the molecules inside an ice pack be different from the liquid inside of an insulated cup?
wow isn't this interesting, I never would've thought to find u on here
Find the mass (in grams) of 1.5 moles of BaSO4
Answer:
350 g BaSO₄
General Formulas and Concepts:
Chemistry - Stoichiometry
Reading a Periodic TableUsing Dimensional AnalysisExplanation:
Step 1: Define
1.5 mol BaSO₄
Step 2: Identify Conversions
Molar Mass of Ba - 137.33 g/mol
Molar Mass of S - 32.07 g/mol
Molar Mass of O - 16.00 g/mol
Molar Mass of BaSO₄ - 137.33 + 32.07 + 4(16.00) = 233.4 g/mol
Step 3: Convert
[tex]1.5 \ mol \ BaSO_4(\frac{233.4 \ g \ BaSO_4}{1 \ mol \ BaSO_4} )[/tex] = 350.1 g BaSO₄
Step 4: Check
We are given 2 sig figs. Follow sig fig rules and round.
350.1 g BaSO₄ ≈ 350 g BaSO₄
Cookware companies have been using a chemical called C-8, which helps to create a nonstick coating to pans. However, the Environmental Protection Agency (EPA) recently claimed that the use of C-8 in the manufacturing of nonstick cookware should be discontinued because studies show it causes cancer.
Who might benefit financially the most from the EPA’s claim?
OwO ^ ^ its A guys knowing cause i took the test
Answer:
C
Explanation:
cookware manufacturers who make pans out of steel only
The total amount of matter of all of the organisms in an ecosystem is referred to as
2.
What did five different witnesses see in the area where Mary Lou Arruda
disappeared?
A. Mary Lou talking to an unknown man.
B. A green car driven by an unknown man.
C. Mary Lou's bicycle in the trunk of a green car.
D. An unknown man on foot following Mary Lou .
Answer:
c
Explanation:
I believe its c but i could be wrong sorry if I am
Help please. ASAP.
1. Explain how you think changing in the thickness or length of the nail will affect the strength of the electromagnet
Answer:
I believe- If there is more metal for the magnet to reach for, then the strength will grow but it may be harder to pick up off of a surface depending on the weight of the nail. If it is a light nail, it would be more efficient for a quick result in having the magnet to pick it up
Explanation:
Answer:
Ferromagnetic materials make the magnet stronger than non-ferromagnetic materials like paper, wood, or air. A wider nail will make the magnet stronger. Making the nail longer will not make the magnet stronger, unless you also add more turns to the coil.
Explanation:
I hope this helps!!
What is the mass of 0.0467 mol of the element sodium (Na)
Answer:
Explanation:
All periodic tables list different amounts of elemental masses. I'm going to round Sodium to 23
1 mol of sodium = 23
0.0467 mol sodium = x
Cross multiply
1*x = 0.0467 * 23
x = 1.0741 grams
what does light emission(color) tell us about elements?
Answer:
The color of the light emitted depends on the energies of the photons emitted, which are in turn are determined by the energies required to move electrons from one orbital to another. Those colors are as distinctive to each element as fingerprints are to people. Hope this helps
Answer:
The color of the light emitted depends on the energies of the photons emitted, which are in turn are determined by the energies required to move electrons from one orbital to another. Depending on the element you put in the flame, various different energies of photons (colors) will appear. Those colors are as distinctive to each element as fingerprints are to people.
Explanation:
Can you calculate the energy needed to increase the temperature of 100kg of iron by 40°C?
Answer: 177600 J or 177.6kJ
Explanation:
For this problem, we need to use q = mcAT
we have m = 10000, and AT= 40. The specific heat of iron is 0.444.
So now we can plug it in: q = 10000*.444*40 = 177600 J or 177.6kJ
Answer:
1848000J
Explanation:
Given parameters:
Mass of iron = 100kg
Temperature change = 40°C
Unknown:
Energy needed to increase the temperature = ?
Solution:
The amount of energy needed is given by the expression below:
H = m C Δt
m is the mass
c is the specific heat capacity
Δt is the change in temperature
c for iron is 462J/kg°C
Now insert the parameters and solve;
H = 100 x 462 x 40 = 1848000J
Which of the following best defines an acidic solution?
Answer:
D is the correct answer
Explanation:
A is incorrect because anything above 7 on the PH scale is a base
B is incorrect because anything equal to 7 is neutral
C is incorrect because there is no substance less than 0 on the PH scale.
Hopefully this helps.
A mixture contains 20% iron ions by mass. What mass of iron chloride (FeCl) would
you need to provide the iron ions in 50 g of the mixture? A of Fe = 56, A of Cl = 35.5.
.
Mass of iron chloride (FeCl₂) : 22.68 g
Further explanationProust stated the Comparative Law that compounds are formed from elements with the same Mass Comparison so that the compound has a fixed composition of elements
In the same compound, although from different sources and formed by different processes, it will still have the same composition/comparison
With this law, we can calculate how many grams an element is needed to make a compound with a certain mass, as desired
[tex]\tt mass~Fe=\dfrac{Ar~Fe}{MW~FeCl_2}\times mass~FeCl_2[/tex]
The iron ions in 50 g mixture :
[tex]\tt 20\%\times 50~g=10~g[/tex]
[tex]\tt 10=\dfrac{56}{127}\times mass~FeCl_2\\\\mass~FeCl_2=22.68~g[/tex]
Maggie has 4 binders with 30 stamps in each binder. She has 3 binders with 36 baseball cards in each binder. If she gives away 45 stamps to a friend, how many stamps and cards does she have left? Maggie has stamps and cards left.
Answer:
The number of stamps and cards Maggie has left if she gives 45 stamps to a friend is 183
Explanation:
If Maggie gives 45 stamps to a friend, you must calculate the number of stamps and cards she has left.
You know Maggie has 4 folders with 30 stamps in each folder. So the number of stamps she owns is calculated as:
4 folders*30 stamps in each folder= 120 stamps
If Maggie gives 45 stamps to a friend, then the number of stamps she has left will be calculated as the difference (the subtraction) between the stamps she owned and the ones she gives away:
120 stamps - 45 stamps= 75 stamps
On the other hand, she has 3 binders with 36 baseball cards in each binder. So the number of cards she owns is calculated as:
3 binders * 36 baseball cards in each binders= 108 baseball cards
The number of stamps and cards you have left is calculated as:
75 stamps + 108 baseball cards= 183
The number of stamps and cards Maggie has left if she gives 45 stamps to a friend is 183
Four substances are tested for different properties. The results of the tests are in the table below.
Substance
Combustible
Reactivity
Solubility in water
Solubility in ether
Boiling point (ºC)
W
Yes
Yes
Soluble
Insoluble
883
X
Yes
No
Insoluble
Insoluble
2,750
Y
Yes
No
Insoluble
Soluble
196
Z
No
Yes
Soluble
Soluble
98
Which substance is most likely an alkane?
W
X
Y
Z
Answer:
Element Y, or the third option
Explanation:
Alkanes are insoluble in water, but soluble in ether. Their boiling points are pretty low, barely reaching 200 degrees, so element Y is an alkane.
Answer:
c.
Explanation:
What is the mass of oxygen in 230 g of sulfurous acid, H2SO3? (With solving pleaseee)
Answer:
Hi. U should do like this
Chemical and physical element properties are determined by their valence electrons. How do you describe metals with only one valence
electron?
A .highly reactive
B. poor conductors of electricity
C. reactive with other metals
D. likely to gain more electrons
Answer:
B
Explanation:
Chemical and physical element properties are determined by their valence electrons metals with only one valence electron are poor conductors of electricity. Option B is correct.
What are valance electrons?Valence electrons are the electrons present at the valance shell or orbit of the atom and always take part in the chemical reaction or reaction with other metals and can conduct electricity.
If the atom contains only one valance electron in the outermost shell or valance shell then it cannot conduct the electricity properly due to the fewer number of electrons.
Therefore, Option B is correct. Chemical and physical element properties are determined by their valence electrons metals with only one valence electron are poor conductors of electricity.
Learn more about valance electrons, here:
https://brainly.com/question/866518
#SPJ2
HELP AN ILL PUT U IN BRAINLIEST - THANKYOU
Answer:
D
Explanation:
The amount increased to a certain point then decreased
Answer:
it is D
Explanation:
10 g of copper is heated and the mass increases to 12.5 g. What is the mass of the copper in the new substances? show with steps
Answer:
10 g
Explanation:
The heating of copper can be represented by the following equation:
Cu + 1/2O2 ----> CuO
The new substance is copper oxide, CuO.
From the law of conservation of matter which says that matter can neither be created nor destroyed but be converted from one form to another, it means that barring any loss during heating, all the Cu should be converted to CuO. Hence, the amount of copper in the new substance should remain 10 g.
Please help me
What will oxygen likely do to complete its outermost shell, based on the Lewis dot diagram shown?
accept electrons
accept some electrons and give up other electrons
move electrons from the inner shell to the outer shell
give up electrons
Answer:
A. Accept electrons
Explanation:
The octet rule states that 8 electrons stabilizes a molecule. This means that oxygen will try to fill the two empty spots with electrons from other molecules. The Lewis Dot diagram shows these two empty spots with the empty circles at the bottom.
Lewis dot structures, also known as electron dot structures, are schematics that show the interatomic chemical bonds in a molecule. Additionally, they show how many lone pairs there are overall in each of the atoms that make up the molecule. Here 'O' accepts electrons. The correct option is A.
The electrical structures of the elements, especially the electron pairings, are reflected in the Lewis dot structures. Lewis structures can be viewed as "electron bookkeeping" and are a helpful approach to condensing some bonding-related information. Each dot in a Lewis dot structure corresponds to 1 electron.
Group 6 member oxygen still requires two additional electrons to complete its outer shell and remain stable. According to the octet rule, an object needs 8 valence electrons in the outer shell to be stable.
Thus the correct option is A.
To know more about Lewis dot diagram, visit;
https://brainly.com/question/34127343
#SPJ6
When is the potential energy transformed into kinetic energy?
When it is in motion, i.e no longer stopped
Explanation:
If a ball is lifted to a certain height, it gains potential energy. If it is then dropped, the potential energy is converted into kinetic energy as it looses height but gains speed.
7.
A 27.8 L balloon is filled with 7.52g of gas X and placed next to a 27.8 L balloon filled with helium.
Given that Helium has a density of 0.179g/L, which statement correctly explains the movement of the balloons
with valid justification?
a) The balloon filled with helium will float higher because helium is less dense than gas X
b) The balloon filled with gas X will float higher because gas X is less dense than helium
c) Both balloons will float to the same level because their densities are the same
d) Both balloons will float to the same level because their volumes are the same
e) There is not enough information to determine the movement of the balloons
Answer:
a) The balloon filled with helium will float higher because helium is less dense than gas X
Explanation:
Since gases are known to not have fixed density, they take up the density of their containers, let us find the density of the gas in first balloon.
Density is the mass per unit volume;
Density = [tex]\frac{mass}{volume}[/tex]
Insert the parameters and solve;
mass of gas = 7.52g
volume of the gas = 27.8L
Density = [tex]\frac{7.52}{27.8}[/tex] = 0.271g/L
Let us compare the two densities;
Density of gas = 0.271g/L
Density of helium = 0.179g/L
We see that the density of the gas is higher than that of helium, so, it not float as high as the balloon with helium. The balloon with helium is lighter.
what is the electical charge on the nucleus of the boron atom ?
Which option is an example of a chemical property?
boiling point
density
color
ability to react with oxygen
Answer:
Boiling point is one of the answers
Choose the coefficient for blank 1 (in front of C)
___ C + ___ S8 --> ___ CS2
2
1
3
4
Answer:
;l ok
Explanation:
Calculate the mass of 0.100 mol of calcium
Answer:
4.01 g
Explanation:
Calculate the amount of heat needed to evaporate 235.0 grams of water from 25.0°C to 100.0°C.
Teresa creates an experiment Washington states to read colored substances together in a container in observes the solution slowly changing from red to blue for the next eight minutes. The solution becomes completely blue after 8 minutes. What does this represent about the type of change happening in the container
The question is incomplete, the complete question is;
Theresa creates an experiment where she mixes two red-colored substances together in a container and observes the solution slowly changing from red to blue for the next eight minutes. The solution becomes completely blue after eight minutes. What does this represent about the type of change happening in the container? A chemical change started immediately and finished at eight minutes. A non-chemical change started immediately and finished at eight minutes. A chemical change occurred at four minutes. A non-chemical change occurred at four minutes.
Answer:
A chemical change started immediately and finished at eight minutes.
Explanation:
A chemical change is one in which a new substance is formed. One of the indicators that a chemical change has occurred is the change in the color of the system from red to blue.
The question clearly stated that the change occurred gradually. This means that the reaction must have started immediately the substances were mixed and went on to conclusion after eight minutes when the complete blue color appears.
A gas is produced when 25 g of substance X is mixed into 60 g of solution Z in a beaker. The mass of the solution in the beaker after the reaction is 75 g. What is the mass of the gas released?
(X + Z -> gas + solution)
mass of the gas = 10 g
Further explanationThe law of conservation of mass :
In a closed / isolated system, the total mass of the substance before the reaction will be equal to the total mass of the reaction product.
Reaction
[tex]\tt X+Z\rightarrow gas+solution[/tex]
mass before reaction=mass after reaction
[tex]\tt 25+60=gas+75\\\\gas=25+60-75=10~g[/tex]
heyyyyyyy......................
Answer:
helllllooooooo hi how is life
Answer:
hiiii
Explanation:
Explore the Build an Atom simulation. Identify one interesting function, quality, or graphic in the simulation.
Answer:
- Adding protons changes the identity of the atom, adding one moves from the right to left on the Periodic Table.
Find the kinetic energy of a 5kg bowling ball that is traveling 2 meters per second
Explanation:
KE = ½ mv²
= ½ x 5 x 2² joule
= 10 joule