Write a caption for a photo of a polluted city.​

Answer:

Methane

Explanation:

Beause it's a compound

Answer:

A methane

Explanation:

Methane is one carbon compound in which carbon is attached by hydrogen atom's. It's molecular formula is CH4

cell is a basic unit of all living things.

Explanation:

because all the metabolic activities performed by the body are outcome of cellular activities

The one with higher temperature is the one with NaOH as heatis given off during the neutralization reaction that occurs.

Volume can be defined as the amount of space a substance or an objects occupies usually in a closed container.

Volume is measures in litres.

When water is added to dilute acid like HCl, they become more dilute.

When NaOH is added to HCl, a neutralization reaction occurs.

The student will determine the contents of the flasks by adding 10 ml of hcl to each flask. If the NaOH reacts with the Hcl, there will be an increase in temperature.

The increase in temperature is due to the heat of neutralization of the reaction between NaOH and HCl.

Learn more about volume at: https://brainly.com/question/1972490

#SPJ1

The distance between the two points ( 8 , − 5 ) and ( 1 , 1 ) is determined as 9.2 units.

The distance between two points is calculated using the following equation.

for a given points (x1, y1), (x2, y2), the distance, d is;

d = √[(x2-x1)² + (y2 - y1)²]

From the given question;

x1 = 8, y1 = -5

x2 = 1, y2 = 1

distance = √[(1-8)² + (1 - -5)²]

distance = √[(-7)² + (16)²]

distance = 9.22 units

Thus, the distance between the two points ( 8 , − 5 ) and ( 1 , 1 ) is determined as 9.2 units.

Learn more about distance between two points here: https://brainly.com/question/7243416

#SPJ1

The final Concentration of salt having a 5.0 ml sample of a protein in 0.5m nacl. you place the protein/salt sample inside dialysis is 0.62mM.

Concentration is defined as the ratio of number of moles of substance to the volume of the substance occupied.

The dialysis is normally dilution of the solution as the dialysis bag the salt present in protein sample is pass and go to the dialysing rhe solvent (water).

As we know that,

M1V1 = M2V2

M1 and M2 are the initial and final concentration of NaCl in the dialysis bag.

V1 and V2 are the initial and final volume of NaCl in the dialysis bag.

Given,

M1 = 0.5M

V1 = 5mL = 0.005L

V2 = 4 + 0.005 = 4.005L

By substituting all the values, we get

M2 = 0.5 × 0.005/4.005

= 0.00062M

= 0.62mM.

Thus, we calculated that the final Concentration of salt is 0.62mM.

learn more about Concentration:

https://brainly.com/question/14803618

#SPJ4

DISCLAIMER:

The above question is incomplete.

Here is the complete question:

You have a 5.0 ml sample of a protein in 0.5M NaCl. You place the protein/salt sample inside dialysis tubing and place the bag in a large beaker of distilled water. Your goal is to remove as much NaCl from the sample as possible. Since you know that the final salt concentration will be the same inside the tubing as out, you can calculate the final concentration of the salt.

A. If you decide to place the dialysis bag in 4.0 L of distilled water for 12 h the final concentration of the salt would be in ________ mM

Answer:

oil & mining are big in earth sciences

Answer:

false

Explanation:

there are lot of aspects of Mars that they are disconcerting still like scientists get paid a lot because of that astronomers get paid a lot because of that also.

The replacement of gold from trapped pedestal is a mathematical equation.

Density is defined as the measurement of how tightly the material is packed together. It can also be defined as the substance mass per unit volume.

The S.I. unit of density is kilogram per cubic meter.

Density =  mass / volume

Thus, the replacement of gold from trapped pedestal is a mathematical equation.

To learn more about density, refer to the link below:

https://brainly.com/question/6107689

#SPJ1

The cycloalkanes have the general formula CnH2n, where n is the number of carbons.

Therefore, the general formula for cycloalkanes is CnH2n.

Learn more about cycloalkanes:

https://brainly.com/question/2289945

#SPJ4

Sodium has more protons, neutrons, and electrons than Lithium.

The nuclei of atoms consist of protons and neutrons. Both component form the bulk of the mass of atoms.

Outside the nucleus, electrons are found in the orbitals surrounding the nucleus.

The atomic number of an atom is the number of protons in the nucleus of the atom. For neutral atoms, the number of protons and electrons is the same.

The atomic number of Lithium is 2, while that of Sodium is 11. This means Lithium has 2 protons while sodium has 11.

The atomic mass of Lithium is 7 while that of sodium is 23. This means that sodium has more neutrons than lithium.

Thus, sodium has more neutrons, electrons, and protons, than lithium.

More on atomic components can be found here: https://brainly.com/question/24837697

#SPJ1

Answer:

An easy way to work out the charge of an atom is to look at the periodic table. Elements on the left side of the table usually become positively charged ions and elements on the right side of the table typically have a negative charge. However, you can use a scientific formula to determine the formal charge of an atom.

Explanation:

Nothing happens if the iron rod is inserted into the nitrogen. However, when the iron rod is suspended in the air.

A non-metal, nitrogen is. As a result, it typically interacts with metals to create ionic compounds. Only when the reactants produce products that allow the system as a whole to release energy does the reaction take place. If the system requires energy to undergo the reaction, the reaction cannot take place. When iron is exposed to oxygen and moisture for an extended length of time, a process known as iron oxide occurs. At the atomic level, oxygen bonds to iron to produce the complex known as an oxide, which weakens the metal bond.

The complete question is - If a piece of pure iron is placed in pure nitrogen, nothing happens. If the iron is exposed to air, it begins to rust. What conclusion can you make about air, based on this observation?

Learn more about nitrogen here-

https://brainly.com/question/16711904

#SPJ9

Answer:

do u need answer for all of them?

Answer:

heterogeneous mixture

Explanation:

the particles of each substance can be seen and the mixture has more than one set of properties.

Answer:

2

1

2

3

3

1

Explanation:

In the first law, an object will not change its motion unless a force acts on it.
This is exactly how it worked in the (Last one). There is no movement with no force. The Second one seems a bit strange, but it's been known that inertia is the same as the first law. Why is that? Because there is no force acting on the water but there is some force acting on the glass.

In the second law, the force on an object is equal to its mass times its acceleration.
(First one& Third One) Increasing mass means increasing the force to accelerate with the same magnitude

In the third law, when two objects interact, they apply forces to each other of equal magnitude and opposite direction
The Fifth one. The combustion of the fuel produce force which is greater than the gravititional force acting on the rock. Therefore, a force has a reaction force which accelerates the rock upwards.
The Fourth is pretty much the same. A force of inertia acting as the reaction force here which refuses to move with the paper.
If you didn't get what i mean in any of those please let me know

0.00264 moles of sodium borohydride will be used.

m(NaBH₄) = 100 mg ÷ 1000 mg/g

m(NaBH₄) = 0.1 g; mass of sodium borohydride

M(NaBH₄) = 37.83 g/mol; molar mass of sodium borohydride

n(NaBH₄) = m(NaBH₄) ÷ M(NaBH₄)

n(NaBH₄) = 0.1 g ÷ 37.83 g/mol

n(NaBH₄) = 0.00264 mol; amount of sodium borohydride

Sodium borohydride is white solid and it is a reducing agent.

Sodium tetrahydridoborate is an inorganic compound with the formula NaBH₄.

Mass is a fundamental measure of the amount of matter in the object.

Kilogram (symbol: kg) is the base unit of mass in the International System of Units.

More about molar mass: brainly.com/question/837939

#SPJ4

The thing that will happen to the temperature if you use 75 ml of HCl and 75 ml of NaOH instead is that it increases as more heat is released.

A neutralization occurs when NaOH and HCl are combined. Each chemical reaction has a unique heat of reaction, which is the heat exchanged during the process.

The reaction in issue is exothermic (emits heat), and the amount of heat emitted relies on the chemicals used, their concentrations, and the working temperature (it is produced at a low temperature).

The fluctuation in temperature and the mass used determine how much heat is allocated.

In this case, the thing that will happen to the temperature if you use 75 ml of HCl and 75 ml of NaOH instead is that it increases as more heat is released.

Learn more about experiments on:

https://brainly.com/question/14455989

#SPJ1

From the question, the point at which the heating curve does plateau is the boiling point of water.

The heating curve is used tool that we use to see how the temperature change by the addition of heat affects the state of matter in which the material is obtained. The vertical axis could be used to plot the temperature while the horizontal axis could be used to plot the changes in the state of matter.

There are three states of matter namely;

Liquid

Solid

Gas

Water can be able to exist in all the states of matter that have been mentioned but there is a temperature range at which each state of matter can be observed. Thus we have the solid range, liquid range and the gaseous range of water.

Looking at the graph, when we begin to heat the water, the water is liquid at the start but the temperature increases rapidly. This increase would continue until the temperature  of the water begins to plateau. The point of plateau is the boiling point of water.

Learn more about boiling point:https://brainly.com/question/2153588

#SPJ1

This state at a specific temperature is called phase change.

For example, evaporization is phase change process in which the water changes from a liquid to a gas (water vapor).

Other example, condensation is phase change process in which the water changes from a gas to a liquid.

Heating curve of water show how the temperature changes as water is heated up. A heating curve for water that shows transition zones (see the picture below).

The first phase change is melting, the temperature stays the same while an ice melts.

The second phase change is boiling, the temperature stays the same while a water boils.

More about phase change: brainly.com/question/27842512

#SPJ4

Beryllium, Calcium, Radium elements should have the most similar chemical properties.

Chemical properties can be defined as a characteristics or behavior of the substance that be observed when it undergo a chemical change or reaction. Chemical properties may include flammability, toxicity, acidity, basicity, reactivity, heat of combustion and many more.

Beryllium, Calcium and Radium are the elements of alkaline earth metal and the share most of the similar chemical and physical properties.

Thus, Beryllium, Calcium, Radium elements should have the most similar chemical properties.

To learn more about chemical properties, refer to the link below:

https://brainly.com/question/1935242

#SPJ1

The metals are good conductor of electricity, thus among this titanium is the best conductor of electricity.

Conductors is defined as a substance or type of material that allow flow of charge or electricity in one or more direction. Metals are commonly consider as a good conductor of electricity. It allow electricity to flow through them very easily and produce electric current.

Metals are defined as the elements that are typically hard due to presence of strong metallic connection between the atoms.

Thus, metals are good conductor of electricity, thus among this titanium is the best conductor of electricity.

To learn more about conductors, refer to the link below:

https://brainly.com/question/18084972

#SPJ1

The density in g/cm³ is 0.2095 g/cm³.

The mass of a material substance per unit volume is known as density. The equation for density is d = M/V, where d represents density, M is mass, and V is volume. Density is often measured in grams per cubic centimeter. The weight of an object can be calculated by dividing its mass by the acceleration of gravity; this value is often more significant practically than the mass.

Other tables include information on the weight of various materials per unit volume; this quantity is also known as weight density, specific weight, and unit weight. also take a look at specific gravity. The most popular way to indicate particle density is as n, which instead of referring to the number of particles per unit volume

To learn more about density please visit-
https://brainly.com/question/1028144
#SPJ9

Taking into account the definition of atomic number and mass number, the three true statements are:

All atoms are made up of subatomic particles: protons and neutrons, which are part of their nucleus, and electrons, which revolve around them. Protons are positively charged, neutrons are neutrally charged, and electrons are negatively charged (electrons).

The atomic number of a chemical element is the total number of protons that each atom of that element has.

Atoms in nature are electrically neutral, so the number of positive and negative particles is the same. That is, in an atom that has no charge, the atomic number also indicates the number of electrons.

The mass number indicates the total number of particles in the nucleus. That is, the mass number is the sum of the number of protons and the number of neutrons in the atomic nucleus:

Mass number = (number of protons) + (number of neutrons)

So, If you know the number of protons and the mass number, the number of neutrons can be calculated as:

Number of neutrons= mass number - number of protons

Considering the definition of atomic and mass number, you can know:

Finally, the three true statements are:

Learn more about number of protons, neutrons and electrons:

https://brainly.com/question/5527493

https://brainly.com/question/18575920

#SPJ1

The reaction between 3.214 g magnesium and 8.416 g bromine produces  9.7 g of MgBr2.

The balanced chemical reaction of magnesium and bromine is shown below.

Mg + Br2 → MgBr2

Step 1: Convert the given mass of reactants to moles of reactants

moles Mg = mass Mg / molar mass Mg

moles Mg = 3.214 g / 24.31 g/mol

moles Mg = 0.1322 mol

moles Br2 = mass Br2 / molar mass Br2

moles Br2 = 8.416 g / 159.808 g/mol

moles Br2 = 0.0527 mol

Step 2: Bromine (Br2) is determined to be the limiting reactant. Since the stoichiometric ratio between the reactants is equal to 1, the reactant with a lower number of moles would be the limiting reactant.

Step 3: Convert moles of Br2 to the mass of MgBr2. Their stoichiometric ratio is also 1, which makes the solution easier.

mol Br2 = mol MgBr2

mass MgBr2 = mol MgBr2 * molar mass MgBr2

mass MgBr2 = 0.0527 mol * 184.118 g /mol

mass MgBr2 = 9.70 g

To learn more about stoichiometric ratios, please refer to https://brainly.com/question/9413308.

#SPJ4

The metals are malleable and ductile, which means that they can be beaten into sheets and can be given any desired shape while the nonmetals are brittle and soft. Metallic elements are considered as good conductors of electricity and heat while nonmetallic elements are poor conductors. Metals are lustrous while nonmetals are nonlustrous.

A metal is a material that, when freshly prepared, polished, or fractured, shows a lustrous appearance, and conducts electricity and heat relatively well. Metals are typically ductile (can be drawn into wires) and malleable (they can be hammered into thin sheets).

Learn more about Metals here:

https://brainly.com/question/18153051

#SPJ4

The molecular mass of reactants and products in 2H2 + O2 —> 2 H2O is 36 g/mole.

Molecular mass can be defined as the some of the atomic masses of all the atoms in the molecule of a substance.

It is a molecule relative mass represented by atomic mass unit. It is used to those substance whose constituent particles are molecule.

The molecular mass of  2H2 + O2 —> 2 H2O can be calculated as:

= 2(1x2) + (16x2) -> 2(1x2 + 16)

= 2(2) + 32 ->2(2 + 16)

= 4 + 32 -> 36

= 36 -> 36

Therefore, the molecular mass of reactant is equal to the molecular mass of product.

Thus, the molecular mass of reactants and products in 2H2 + O2 —> 2 H2O is 36 g/mole.

To learn more about molecular mass, refer to the link below:

https://brainly.com/question/1440369

#SPJ1

Tony with an average speed of 70m/min walks the distance from his house to school in a time of: 30 min

The formula and procedure we will use to solve this exercise is:

t = x/v

Where:

x = distance

t = time

v = velocity

Information about the problem:

Applying the time formula we have that:

t = x/v

t = 2100 m/ (70m/min)

t = 30 min

It is a physical quantity that indicates the displacement of a mobile per unit of time, it is expressed in units of distance per time, for example (miles/h, km/h).

Learn more about velocity at: brainly.com/question/80295?source=archive

#SPJ4

A covalent bond is likely to be polar when one of the atoms sharing electrons is more electronegative than the other atom.

When the electronegativity difference is greater, the bond polarity is increasing.

Electronegativity (χ) is a property that describes the tendency of an atom to attract a shared pair of electrons.

Atoms with higher electronegativity attracts more electrons towards it, electrons are closer to that atom.

For example, water (H₂O) is a polar molecule. Atom of oxygen has higher electronegativity and negative charge, while atom of hydrogen has lower electronegativity and positive charge. Atoms of hydrogen and oxygen are connected by polar covalent bonds.

More about covalent bonds: brainly.com/question/3447218

#SPJ4

Answer: El polvo de hornear obtiene su energía de una reacción química que produce burbujas de aire, mientras que la levadura es un organismo vivo real que produce de gas a partir de una reacción biológica. Los dos procesos no son similares, y tampoco son intercambiables en las recetas.

Baking powder gets its energy from a chemical reaction that produces air bubbles, while yeast is an actual living organism that produces gas from a biological reaction. The two processes are also not similar and are interchangeable in recipes.

Explanation:

Answer:

Are there any answer choices? There are many options: stainless steel, aluminum, etc.

Explanation:

The ideal gas equation can be used to determine the molar mass of the substance with the help of the moles. The molar mass of the gas having a mass of 0.458 grams is 9.15g/mol.

Ideal gas law gave the relation between the moles, pressure, temperature, volume, and the gas constant. The moles of the ideal hypothetical gas can be used to calculate the molar mass.

An ideal gas equation is given as:

PV =nRT

Given,

Mass = 0.458 gm

Pressure (P) = 0.98 atm

Volume (V) = 1.2 L

Temperature (T) = 287 K

Gas constant (R) = 0.0821

Substituting values in ideal gas as:

0.98 × 1.2 = n × 0.0821 × 287

n = 1.18 ÷ 23.56

n = 0.05moles

Now, moles are used to calculate molar mass as:

molar mass = mass ÷ moles

= 0.458 ÷ 0.05

= 9.15g/mol

Therefore, 9.15g/mol is the molar mass of the unknown gas.

Learn more about ideal gas, here:

https://brainly.com/question/27946792

#SPJ4