Answer:
Both a fluorine atom and a bromine atom gain one electron, and both atoms become stable.
Explanation:
The two elements compare when they form bonds in that when both a fluorine atom and a bromine atom gain one electron, they both become stable.
Fluorine and bromine are elements called halogens. They both belong to group 7 on the periodic table. When they gain an electron each, they become isoelectronic with a corresponding noble gas. This gives their atom special stability.Answer:
3) Both a fluorine atom and a bromine atom gain one electron, and both atoms become stable
Explanation:i got it right on the quiz
hope this helps
How can we predict melting points?
Explanation:
Many of the properties of organic molecules can be predicted based on the strength of their cohesive molecule-molecule interactions (i.e. how much the molecules want to stick together). The boiling point (BP) and melting point (MP) of an organic molecule is related to: 1) the molecular weight of the molecule and 2) the "stickiness" of individual molecules for their neighbors.
For example, molecules in a liquid are held together by attractive interactions between molecules. These interactions must be broken (by adding heat) in order to transition into the gas. The stronger the cohesive interactions, the more heat that is necessary for the liquid-to-gas phase transition. These same attractive molecule-molecule interactions have to be broken for a solid to liquid phase change.
Examples: (Rank the following molecules in terms of MP and BP.)
Introduction to intermolecular forces:
All of the attractive intermolecular forces are based on the electrostatic attraction of positive charges on one molecule with negative changes. The stronger the charges, the stronger the attraction between molecules.
How to:
In general, comparisons can only be made between molecules with similar formulas or molecular weights.* First, identify the functional groups in the molecules being compared. Each functional group can form different types of intermolecular interactions (see the chart above). Interactions higher up on the chart form stronger cohesive interactions and will have higher boiling points and melting points.
* Note that larger molecules usually have higher boiling points and melting points. This is not because of their higher molecular weights but because they usually have greater surface areas with which to form more intermolecular interactions. This is also why linear molecules tend to have higher MPs and BPs than branched (or more spherically shaped) molecules. Linear molecules will have more surface area than a more spherically shaped molecule.
All three molecules have approximately the same molecular formula and molecular weights. Only molecule A contains a strongly polarized or ionic functional group: an aldehyde. The C=O group in aldehydes generate a strong molecular dipole (partial + and - charges). Thus, it can form weak attractive dipole-dipole interactions, and A will have the highest boiling point and highest melting point in this series of compounds.
Molecules B and C are alkanes. They can only form the weakest attractive dispersion interactions between their molecular surfaces. Due to its long-thin shape, B will have a greater surface area and can form more dispersion interactions than the rounder C. Therefore, B will have a higher boiling point and melting point than C.
Molecule A is ionic (it has charges). Therefore, it can form the strongest ion-ion interactions and will have the highest boiling point and melting point.
Molecule B is a carboxylic acid with an acidic proton and basic lone pairs. Therefore, it can form medium strength hydrogen bonding interactions, and it will have the next highest boiling point and melting point.
Molecule C is a carboxylic ester, which is a polar functional group. However, it does not have an acidic proton. Therefore, esters cannot form hydrogen bonds with themselves. Instead, they can only form weak dipole-dipole interactions and will have the lowest boiling point and melting point in this series of compounds.
Answer:
Explanation:
By thinking about non covalent intermolecular interactions, we can also predict relative melting points. All of the same principles apply: stronger intermolecular interactions result in a higher melting point.
what is the soul of water?
Answer:
soul eater is a social enterprise
Explanation:
they donate a minimum of 10 percent to the soul community . soul water was born from the idea that everyone should be able to enjoy quality drinking tap water
When determining an element’s chemical properties, the most important subatomic particle to look at is
Answer:
Electrons
Explanation:
When determining the chemical properties of elements, the most important subatomic particle to consider is the electrons.
Electrons are negatively charged particles that orbits an atom. They occupy the extranuclear space of an atom.
These electrons determines the chemical properties of each atom. Most especially, the valence ones. All elements wants to resemble the noble gases, so they alter their number of electrons in order to attain this stable state.
is soda homogeneous or heterogeneous?
Answer:
Thecinically it is both because and an un opened bottle of soda is homogeneous and an opened bottle of soda is herterogeneous. I hope this helps please reward branlist.
PHYSICS.... NOT CHEMISTRY
If the gravitational force between the two objects is 2.0×10 ^-7 N and the value of gravitational constant, G= 6.67×10 ^-11 n m² kg¯², what is the value of D?
F=Gm1m2/D*2
or,2.0×10^-7 = (6.67×10^-11 ×75×90)/D^2
or,2.0×10^-7 = (45022.5×10^-11)/D^2
or,D^2=22511.25×10^-4
D=1.5003m
Which of the following would be considered a derived unit? A) length B mass C) density D) temperature
Answer:
density because it S.I unit is derived from fundamentals
4-How does the concentration of ions in a strong acid differ from a weak acid?
I need to find the orbit notation
1. Ne - 1s 2s 2p 3s 3p 4s 3d 4p 5s
Answer:
1s*2 2s*2 2p*6
Explanation:
atomic number of neon is 10 so the s-shell contains 2 electron and p-shell contains 6
how many equivalent statements are needed to convert 23.4 Gm into mm? 20 points!
Answer:
23.4 x 10¹²mm
Explanation:
Given problem;
Convert Gm to mm;
Gm = Gigameters
mm = millimeters
1 Gigameter = 1 x 10⁹m
1000mm = 1 m
To convert from Gm to mm;
23.4 Gm x [tex]\frac{1 x 10^{9} m}{1Gm}[/tex] x [tex]\frac{1000mm}{1m}[/tex] = 23.4 x 1 x 10⁹ x 10³ =
= 23.4 x 10¹²mm
What type of waves transmit signals in satellite communication?
A. Microwaves
B. X-rays
C. Gamma Rays
D. Radio Waves
Answer:
satellites communicate by using radio waves to send signals to the antennas on the Earth. the antennas then capture those signals and process the information coming from those signals.
hope this helps:)
Answer:
D
Explanation:
Kind of self explanatory don't you think?
What are the parts of an electron configuration?
Answer:
Explanation:
electronic confirmation=1s^2,2S^2,2P^6,3S^2
atomic no.is 12 therefore :- this is magnesium
Period=3
Block=s-block
Group=II A
Why does a plant based diet provide fewer resources to produce
Answer: A plant-based diet requires less water to produce the food as it suppress all animal based products. In addition to consuming a lot of water to produce meat , livestock farming also pollutes water source because of the waste produced by the livestock ends up in waterways.
Explanation:
Answer:
I'm doing this so you can give smithpaige347 Brainliest
Explanation:
What type of a solution is 60g NaNO3 at 40°C in
100g H202
Answer:
Explanation:
Saturated solution
Most earthquakes and volcanoes occur in areas of the Pacific Ocean called "The Ring of Fire." What is the main reason for this?
Group of answer choices
Large numbers of people live in this area.
That area of the Earth is hotter than any other area.
Lithosphere plate boundaries are found in that area.
The weight of the ocean water forces magma to the surface.
Answer:
Lithosphere plate boundaries are found in that area.
Explanation:
Answer:
C is the right answer
Explanation:
In the future, what would you expect to happen to the distances between galaxies?
The distances between galaxies are expected to increase.
This is due to the endless expansion of the universe, proposed by cosmological inflation.
do you agree or not that evidence is only used to back scientific laws and provide evidence why or why not!!!!!! thank you, will mark brainliest to whoever does it correct the 1st time what i asked!!!!!!!!!!
Answer:
yes, because evidence from scientifically research studies, is important because it lets us make decisions based on what works with studies of science we can know if this is right or not
Explanation:
Hope i helped~
The ghost plant is white with a single stalk. Even though it looks more like a mushroom, the ghost plant is related to blueberry plants. The ghost plant is a parasite that feeds on fungi under the ground. Ghost plant cells have all the usual plant organelles except for a .
Answer:
chloroplast
Explanation:
The smallest unit of life is a _____, and all organisms have at least one.
Answer:
cell
Explanation:
hdjdjdjjsisidjsjsjjsisisiisjsjsjs
Answer:
cell
Explanation:
That is the smallest unit of life, and every living thing has at least one cell, such as unicellular living things.
I NEED THIS ASAP PLEASEE
what is the partial pressure of nitrogen dioxide gas in psi in a sealed vessel that has a total pressure of 2558 psi and partial pressures of 54.6 bar for carbon dioxide?
Answer:
121.8bar
Explanation:
The partial pressure is the pressure a gas would exert if it were alone in the volume of the gas mixture;
Given parameters:
Total pressure = 2558psi
Partial pressure of carbon dioxide = 54.6bar
Unknown:
Partial pressure of nitrogen dioxide gas = ?
Solution:
Total pressure = partial pressure of carbon dioxide + partial pressure of nitrogen dioxide gas
Let us convert from psi to bar;
14.504psi = 1 bar
2558psi = [tex]\frac{2558}{14.504}[/tex] = 176.37bar
Now;
Partial pressure of nitrogen oxide = 176.37bar - 54.6bar = 121.8bar
Answer:
1766 psi
Explanation:
The first step is to convert 54.6 bar into psi units, which is aproximately 791.9 psi. Next, subtract that from 2558 psi and you will get about 1766 psi.
URGENT PLEASE HELP NOW!!
When do most ionic bonds form, based on this Periodic Table?
when elements from B bond with themselves
when elements from A bond with elements from B
when elements from C bond with elements from D
when elements from A bond with themselves
Answer:
when elements from A bond with elements from B
Explanation:
The elements in part A are metals and that of B are non-metals. Ionic bonds are formed between metals and non-metals. Thus option b is correct.
What is ionic bonding?An ionic bond is formed between a metal and non-metal through loss of electron from the metal to the non-metal. Metals are electron rich and easily loss electrons.
Non-metals are electronegative and they are electron -deficient. They need to gain electrons to attain stability. Therefore non-metals such as oxygen, nitrogen, carbon etc. bonds with metals by gaining electrons from metals.
The positive charge of metal acquired by loss of electron and negative charge of nonmetals acquired by gain of electron attracts electrostatically and form the ionic bond.
The elements from A thus bonds ionically with elements from B.
To find more on ionic bonding, refer here:
https://brainly.com/question/11527546
#SPJ2
The temperature T in Kelvin is 273.15 more than temperature C in degrees Celsius. Use your function to find the equivalent temperature in Kelvin for 100*C.
Answer:
T(K) = 373.15 K
Explanation:
The kelvin is the base unit of temperature in the International System of Units (SI). The symbol used to express temperature in kelvins is K.
The temperature of zero kelvins is called the absolute zero. It is considered to be the lowest possible temperature, although nothing has reached it. The absolute zero (0K) is - 273.15 degrees Celsius.
This is the equation we can use to solve this question:
[tex]T(K) = T(C) + 273.15[/tex]
We have 100*C.
[tex]T(C) = 100 C[/tex]
[tex]T(K) = 100C + 273.15[/tex]
[tex]T(K) = 373.15 K[/tex]
Is meat a mixture or substance?
Answer:
This type of meat is substance. If you were talking about meters then it would be a system of measurement.
Answer:
Mixture
Explanation:
Meat is composed of approximately 72–75 % water, 21 % nitrogenous compounds (19 % proteins and 1.5 % nonprotein nitrogen compounds which include nucleotides, peptides, creatine, and creatinine), 2.5–5 % lipids, 1 % non-nitrogenous compounds (vitamins) and carbohydrates (a very small amount of glycogen).
carol accidentally dropped a container of salt and sodium chloride, into a container of a dark grey metal. carol is pretty sure that the gray metal is iron fillings. using the table above, help carol seperate the two substances
Explanation:
The best way to separate the mixture is by using a bar magnet. We explore the magnetic property of the iron fillings in the mixture to separate it out.
The mixture is spread out thinly on a flat surface. A bar magnet is hovered above the spread of the mixtureThe magnet attracts the iron fillings to itself This will leave the salt behind in the mixture.What is the mass of one electron in grams if an electron has the charge of
-1.6022 x 10-19C and lg = -1.76 x 108 C.
The mass of one electron : 9.103 x 10⁻²⁸ g
Further explanationElectrons are a part of the atomic nucleus particles (including protons and neutrons), and are negatively charged (-1)
An electron has the charge of -1.6022 x 10⁻¹⁹C
1 g = -1.76 x 10⁸ C
so the mass of one electron :
[tex]\tt \dfrac{1.6022\times 10^{-19}}{1.76\times 10^8}=9.103\times 10^{-28}~g[/tex]
Sea-Floor Spreading1. The arrows on the figure show the ocean floor spreading from the ridge. What are three kinds of evidence scientists have found to support this idea?
A. B. C.
I NEED HELP
Which element below would you most likely expect to be a poor conductor of heat and electricity?
Answer:Nonmetals and rubber
Explanation: hope this helps
Answer:
phosphorus
Explanation:
non-metals are poor conductors
Balancing Chemical Equations method3- the algebraic method
Answer:
Write a different letter coefficient in front of each compound in the equation. Write algebraic expressions or rules for each element that equate its atoms on the LHS and RHS. Substitute the values into the other rules to obtain the balancing coefficients
Explanation:
PLEASE HELPPPP! :{
Leandra is performing an investigation. She places one strawberry by the window in the sunlight and another strawberry inside of the refrigerator. Leandra leaves the strawberries for three weeks and observes them. After the three weeks, what observation did Leandra make?
A. The strawberry in the refrigerator rusted faster because it was exposed to less heat.
B. The strawberry by the window rusted faster because it was exposed to more heat.
C. The strawberry in the refrigerator rotted faster because it was exposed to less heat.
D. The strawberry by the window rotted faster because it was exposed to more heat.
Which of the following trends decrease down group 1 from Li → Cs?
I. melting point
II. jonization energy
III. atomic radius
A.
I and II only
B.
II and III
C.
II and IIl only
D.
I and III only
Answer:
A. I and II only
Explanation:
As we move down the group atomic radii increased with increase of atomic number. The addition of electron in next level cause the atomic radii to increased. The hold of nucleus on valance shell become weaker because of shielding of electrons thus size of atom increased.
As the size of atom increases the ionization energy from top to bottom also decreases because it becomes easier to remove the electron because of less nuclear attraction and as more electrons are added the outer electrons becomes more shielded and away from nucleus.
Melting point also goes to decreases because there is large distance between the positive nucleus and bonded electrons thus overall attraction goes to reduced and less energy is required to melt.
Calculate the volume (in cm³) of 935 grams of steel. The density of steel is 7.8 g/cm³. Give your answer to 2 decimal places.
Answer:
119.87 cm³Explanation:
The volume of a substance when given the density and mass can be found by using the formula
[tex]volume = \frac{mass}{density} \\[/tex]
From the question we have
[tex]volume = \frac{935}{7.8} \\ = 119.871794...[/tex]
We have the final answer as
119.87 cm³ to two decimal placesHope this helps you