Answer:
The coefficient of friction in the hall is 0.038
Explanation:
Given;
mass of the Parker, m = 73.2 kg
applied force on the parker, F = 123 N
frictional force, Fs = 27.4 N
the coefficient of friction in the hall = ?
frictional force is given by;
Fs = μN
Where;
μ is the coefficient of friction
N is normal reaction = mg
Fs = μmg
μ = Fs / mg
μ = (27.4) / (73.2 x 9.8)
μ = 0.038
Therefore, the coefficient of friction in the hall is 0.038
Four examples of second class levers
Answer:
they are :
Explanation:
wheelbarrow bottle opener an oarOn top of a 3 m tall shelf sits a lonely 4.5 kg toy snake. How much GPE does this snake have if the shelf is on Earth? (g = 9.8 m/s2
Answer:
hi
Explanation:
how r u
A 58-kg boy swings a baseball bat, which causes a 0.140-kg baseball to move toward 3rd base with a velocity of 38.0 m/s.
Calculate the kinetic energy of the baseball (rounding your answer to the integer).
Answer:
101 J
Explanation:
Answer:
[tex]\boxed {\boxed {\sf 101 \ Joules}}[/tex]
Explanation:
Kinetic energy can be found using the following formula:
[tex]KE=\frac{1}{2}mv^2[/tex]
The mass of the baseball is 0.140 kilograms and the velocity is 38.0 meters per second.
[tex]m= 0.140 \ kg \\v= 38.0 \ m/s[/tex]
Substitute the values into the formula.
[tex]KE=\frac{1}{2} [0.140 \ kg][(38.0 \ m/s)^2][/tex]
First, evaluate the exponent.
(38.0 m/s)²= 38.0 m/s * 38.0 m/s = 1444 m²/s²[tex]KE=\frac{1}{2}(0.140 \ kg)(1444 \ m^2/s^2)[/tex]
Multiply the two numbers in parentheses together.
[tex]KE=\frac{1}{2}(202.16 \ kg*m^2/s^2)[/tex]
Multiply the fraction by the number, or divide the number by 2.
[tex]KE=101.08 \ kg*m^2/s^2[/tex]
Round to the nearest whole number. The 0 in the tenth place tells us we can leave the number as is.
[tex]KE\approx 101 \ kg*m^2/s^2[/tex]
1 kg*m²/s² is equal to 1 Joule. Therefore, our answer of 101 kg*m²/s² is equal to 101 Joules (J).
[tex]KE\approx 101 \ J[/tex]
The kinetic energy of the baseball is about 101 Joules.
How to properly hide a body?
NEED ANSWER NOW!!!
WORTH LIFE SENTENCE!!
WILL PAY FOR MOST USEFUL ANSWER!!
Answer:
The septic tank of an abandoned property.
Almost anywhere at a closed refinery (most refineries will never be torn down due to the massive remediation costs involved when they are. Find a good hiding spot there and place the body in the open or bury it)
Numerous quarries are around and most are filled with water. If you ensure that the body will not float to the surface, they are often great disposal locations.
Inside the wall of a home or building - If the body is allowed to desiccate (mummify) then there will be little or no odor. Simply open a wall,insert the body and replaster or drywall it and paint over it.
Underneath an area to be used as a pen or feed lot for domesticated animals. The weight of the animals, plus their manure and the straw placed down to control it will form its own "cap" over the burial site.
In plain sight - The roof of tall abandoned building (hidden from overhead viewing) , an open area in a remote part of the country (after staying there for 2-3 days to see if anyone comes along), or in a storm drain along a lightly used state or county road.
A horse gallops for 3.5 minutes around the raceing track. During this time it changes velocity from 543 min to 628 min. Calculate the acceleration of the horse during this 3.5min interval
Answer:
The acceleration of the horse during this time interval is 24.286 m/min²
Explanation:
Given;
initial velocity of the horse during the gallop, u = 543 m /min
final velocity of the horse during the gallop, v = 628 m /min
time of motion, t = 3.5 minutes
The acceleration of the horse is given by the change in velocity per change in time;
[tex]a = \frac{v-u}{t}\\\\a = \frac{628-543}{3.5}\\\\a = 24.286 \ m/min^2[/tex]
Therefore, the acceleration of the horse during this time interval is 24.286 m/min²
would someone just answer this now?
How is a metre related to kilometre?
Answer:
The kilometer is unit of length in the metric system equivalent to one thousand meters. 1Km is equivalent to 0.6214 miles.
Explanation:
Length is the measurement of the distance from the initial point to the final point.
________________________________________________________
SI Unit:The Si unit of length is meter, that means length is measured in meter units.
____________________________________Relation:The Relation between meter and kilometer is that they both are the units of the length, also the Kilometer(Km) is equals to the 1000 meters(m).
1Km = 1000 meter
1m = 0.001 Km
____________________________________Best Regards,'Borz'DO boys cheat more than girls?
Answer:
I'm not sure.
Explanation:
Look up the statistics
Answer: honestly girls cheat more than guys, its statically proven that females cheat more than guys its because they dont believe in value in a relationship
Explanation:
Carolina (600 N) runs up the stadium (10 meters high) in 9.14 s. How much power did Carolina expend?
View the chart on the characteristics of electromagnetic and mechanical waves and answer the question.
Electromagnetic Waves Mechanical Waves
Transverse Waves Transverse, Longitudinal, and Surface Waves
Do not require a medium Require a medium
Begin with the movement of charged particles Begin when matter is disturbed
How is the transfer of energy different in electromagnetic waves compared to mechanical waves?
a
Electromagnetic waves requires a source of energy
b
Electromagnetic waves can transfer energy through a vacuum, or empty space
c
Electromagnetic waves create a vibrating electric field
d
Electromagnetic waves can change speed or direction
Answer:
a
Explanation:
The flaming gorge bridge, in wyoming rises above a dry gulch. If you throw a rock straight out from the bridge, horizontally, and the rock's horizontal displacement is 255 cm, what was the speed that you thew the rock
Answer:
12.495m/s
Explanation:
Horizontal displacement is the range of the projectile motion.
The range is expressed as;
R = 2U/g
U is the speed at which the rock is thrown (initial speed)
g is the acceleration due to gravity.
Given
R = 255cm = 2.55m
g = 9.8m/s²
Required
Speed U
Substitute the given parameters into the formula as shown;
2.55 = 2U/9.8
Cross multiply
2U = 2.55×9.8
2U = 24.99
U = 24.99/2
U = 12.495m/s
Hence the speed that you thew the rock is 12.495m/s
The SI unit of average speed m.s. True or False. But is there difference between m/s and m.s.
Answer:
false
Explanation:
there is difference in m/s and m.s
when climbing a steep hill, would you want a larger or smaller bicycle gear?
Answer:
Usually when climbing, it's best to be in the small front ring and the largest back ring. If your cadence is about 100 rpm, then whatever gear you're in is fine. It depends on the road, but as long as your pedaling is at a level you're comfortable with, you're fine.
Explanation:
Google answer by the way.
brainliest please help
show the resultant force
8n downwards
since downwards force is greater than upwards just minus
A) 750gm
11. Ifa rectangular solid box of aluminum is heated, which of the following is not true?
A) Its mass remains constant
Cits density increase
B) Its volume increase
Do none of the above
Given :
A rectangular solid box of aluminum is heated.
To Find :
Which of the following is not true.
A) Its mass remains constant
C) its density increase
B) Its volume increase
D) none of the above
Solution :
We know, when an object is heated it expands.
Objects expands means that the volume increases but mass remains same by conservation of mass.
Since mass remains constant and volume increases.
So, density will decrease.
Hence, this is the required solution.
Si unit of thermal conductivity is
Answer: Watts
Explanation: In the International System of Units (SI), thermal conductivity is measured in watts per meter-kelvin (W/(m•k)).
Importance of a cell
Explanation:
Cells are the basic building blocks of all living things. The human body is composed of trillions of cells. They provide structure for the body, take in nutrients from food, convert those nutrients into energy, and carry out specialized functions.
A block of mass m=2.20m=2.20 kg slides down a 30.0^{\circ}30.0
∘
incline which is 3.60 m high. At the bottom, it strikes a block of mass M=7.00M=7.00 kg which is at rest on a horizontal surface, (Assuming a smooth transition at the bottom of the incline.) If the collision is elastic, and friction can be ignored, determine the speeds of the two blocks (v_mv
m
and v_Mv
M
) after the collision.
Answer:
[tex]v_m \approx -4.38\; \rm m \cdot s^{-1}[/tex] (moving toward the incline.)
[tex]v_M \approx 4.02\; \rm m \cdot s^{-1}[/tex] (moving away from the incline.)
(Assumption: [tex]g = 9.81\; \rm m \cdot s^{-2}[/tex].)
Explanation:
If [tex]g = 9.81\; \rm m \cdot s^{-2}[/tex], the potential energy of the block of [tex]m = 2.20\; \rm kg[/tex] would be [tex]m \cdot g\cdot h = 2.20\; \rm kg \times 9.81\; \rm m \cdot s^{-2} \times 3.60\; \rm m \approx 77.695\; \rm J[/tex] when it was at the top of the incline.
If friction is negligible, all these energies would be converted to kinetic energy when this block reaches the bottom of the incline. There shouldn't be any energy loss along the horizontal surface, either. Therefore, the kinetic energy of this [tex]m = 2.20\; \rm kg\![/tex] block right before the collision would also be approximately [tex]77.695\; \rm J[/tex].
Calculate the velocity of that [tex]m = 2.20\; \rm kg[/tex] based on its kinetic energy:
[tex]\displaystyle v_m(\text{initial}) = \sqrt{\frac{2\times (\text{Kinetic Energy})}{m}} \approx \sqrt{\frac{2 \times 77.695\; \rm J}{2.20\; \rm kg}} \approx 8.4043\; \rm m \cdot s^{-1}}[/tex].
A collision is considered as an elastic collision if both momentum and kinetic energy are conserved.
Initial momentum of the two blocks:
[tex]p_m = m \cdot v_m(\text{initial}) \approx 2.20\; \rm kg \times 8.4043\; \rm m \cdot s^{-1} \approx 18.489\; \rm kg \cdot m \cdot s^{-1}[/tex].
[tex]p_M = M \cdot v_M(\text{initial}) \approx 2.20\; \rm kg \times 0\; \rm m \cdot s^{-1} \approx 0\; \rm kg \cdot m \cdot s^{-1}[/tex].
Sum of the momentum of each block right before the collision: approximately [tex]18.489\; \rm kg \cdot m \cdot s^{-1}[/tex].
Sum of the momentum of each block right after the collision: [tex](m\cdot v_m + m \cdot v_M)[/tex].
For momentum to conserve in this collision, [tex]v_m[/tex] and [tex]v_M[/tex] should ensure that [tex]m\cdot v_m + m \cdot v_M \approx 18.489\; \rm kg \cdot m \cdot s^{-1}[/tex].
Kinetic energy of the two blocks right before the collision: approximately [tex]77.695\; \rm J[/tex] and [tex]0\; \rm J[/tex]. Sum of these two values: approximately [tex]77.695\; \rm J\![/tex].
Sum of the energy of each block right after the collision:
[tex]\displaystyle \left(\frac{1}{2}\, m \cdot {v_m}^2 + \frac{1}{2}\, M \cdot {v_M}^2\right)[/tex].
Similarly, for kinetic energy to conserve in this collision, [tex]v_m[/tex] and [tex]v_M[/tex] should ensure that [tex]\displaystyle \frac{1}{2}\, m \cdot {v_m}^2 + \frac{1}{2}\, M \cdot {v_M}^2 \approx 77.695\; \rm J[/tex].
Combine to obtain two equations about [tex]v_m[/tex] and [tex]v_M[/tex] (given that [tex]m = 2.20\; \rm kg[/tex] whereas [tex]M = 7.00\; \rm kg[/tex].)
[tex]\left\lbrace\begin{aligned}& m\cdot v_m + m \cdot v_M \approx 18.489\; \rm kg \cdot m \cdot s^{-1} \\ & \frac{1}{2}\, m \cdot {v_m}^2 + \frac{1}{2}\, M \cdot {v_M}^2 \approx 77.695\; \rm J\end{aligned}\right.[/tex].
Solve for [tex]v_m[/tex] and [tex]v_M[/tex] (ignore the root where [tex]v_M = 0[/tex].)
[tex]\left\lbrace\begin{aligned}& v_m \approx -4.38\; \rm m\cdot s^{-1} \\ & v_M \approx 4.02\; \rm m \cdot s^{-1}\end{aligned}\right.[/tex].
The collision flipped the sign of the velocity of the [tex]m = 2.20\; \rm kg[/tex] block. In other words, this block is moving backwards towards the incline after the collision.
The first step in a star formation is ______?
Bathroom scales read the normal force that is exerted against the floor. What would a scale read when a 100 kg man is in an elevator accelerating upward at 1.2 m/s2? What would it read when the man is accelerated downward at 1.8 m/s2?
Answer:
a
When the lift is moving upward [tex]F = 1120 \ N[/tex]
b
When the lift is moving downward [tex]F = 820 \ N[/tex]
Explanation:
From the question we are told that
The mass of the man is [tex]m = 100 \ kg[/tex]
The upward acceleration is [tex]a_u = 1.2 \ m/s^ 2[/tex]
The downward acceleration is [tex]a_d = 1.80 \ m/s^2[/tex]
Generally the force which the scale will read when the man is moving downward is according to Newton second law represented as
[tex]F + mg = ma[/tex]
[tex]F = m (g - a_d)[/tex]
Here [tex]g = 10 m/s^2[/tex]
=> [tex]F = 100 (10 - 1.8)[/tex]
=> [tex]F = 820 \ N[/tex]
Generally the force which the scale will read when the man is moving upward is according to Newton second law represented as
[tex]F - mg = ma[/tex]
[tex]F = m (g + a_u)[/tex]
Here [tex]g = 10 m/s^2[/tex]
=> [tex]F = 100 (10 + 1.2)[/tex]
=> [tex]F = 1120 \ N[/tex]
A submarine is built to dive to a depth of 90 m where the pressure in the water is about 1 MPa. The engineers want to build a window in the submarine, but the window can only take a force of 10 kN safely. What is the largest surface area window that can be used?
Answer:
The largest surface area window that can be used is [tex]A=0.01\ m^2[/tex]
Explanation:
Pressure
The pressure is defined as force per unit area. The SI unit for pressure is the Pascal (Pa), defined as Newton per square meter.
If a force F acts on a surface area A, the pressure is calculated as:
[tex]\displaystyle P=\frac{F}{A}[/tex]
The pressure at a depth of 90 m is P=1 Mpa= 1,000,000 Pa and the submarine's window can only take a force of F=10 kN=10,000 N.
We need to calculate the largest surface area of the window. We can solve the equation for A:
[tex]\displaystyle A=\frac{F}{P}[/tex]
Substituting:
[tex]\displaystyle A=\frac{10,000}{1,000,000}[/tex]
[tex]A=0.01\ m^2[/tex]
The largest surface area window that can be used is [tex]\mathbf{A=0.01\ m^2}[/tex]
what is electricity
Answer:
Electricity is the flow of electrical power or charge. It is a secondary energy source which means that we get it from the conversion of other sources of energy, like coal, natural gas, oil, nuclear power and other natural sources, which are called primary sources.
Heading into a stop light, a car is traveling with a velocity of 44mph when the driver starts to app breaks. The car takes 15 seconds (or .0041hrs) to come to a complete stop. What is the car's acceleration/deceleration?
Answer:
the car slowed at a rate of 2.93 mph
On Planet X, an astronaut has maximum walking speed of 1.9 m/s. The astronaut's legs are each 1.3 m long. What is the constant of acceleration due to gravity on Planet X?
A. 8.3 m/s2
B. 2.8 m/s2
C. 3.8 m/s2
D. 1.1 m/s2
Answer:
Acceleration due to Gravity:
Explanation:
Here g is acceleration due to gravity. So C. 3.8 m/s2
If a chicken has a weight of 300 N on Earth, what would be its weight on Mercury if the gravity is 0.38.
Answer:
114N
Explanation:
gravity on earth: 10m/s (exact: 9.82)
mass if chicken = 300/10 = 30Kg
weight of chicken on mercury = 3.8 x 30 = 114N (you wrote 0.38 but Mercury's gravity is about 3.7)
Answer:
113.15 g
Explanation:
That's because the planets weigh different amounts, and therefore the force of gravity is different from planet to planet. For example, if you weigh 100 pounds on Earth, you would weigh only 38 pounds on Mercury. That's because Mercury weighs less than Earth, and therefore its gravity would pull less on your body.
1 Una pelota rueda hacia la derecha siguiendo una trayectoria en línea recta de modo que recorre una distancia de 10 m en 5 s. Calcular la velocidad y la rapidez.
Answer:
Entonces la velocidad es 2 [tex]\frac{m}{s}[/tex] hacia la derecha, mientras que la rapidez es 2 [tex]\frac{m}{s}[/tex].
Explanation:
La rapidez es una magnitud escalar que relaciona la distancia recorrida con el tiempo mientras que la velocidad es una magnitud vectorial que relaciona el cambio de posición (o desplazamiento) con el tiempo.
Es decir, la rapidez es una magnitud física que expresa el valor numérico y la unidad de una distancia en relación con el tiempo.
Matemáticamente, es expresada como el cociente entre el camino recorrido y el tiempo transcurrido:
[tex]rapidez=\frac{distancia}{tiempo}[/tex]
Por otro lado, la velocidad expresa cómo se está moviendo un objeto en cada momento, informando la dirección, el sentido y la rapidez del movimiento (la velocidad se refiere al intervalo de tiempo que le toma a un objeto desplazarse hacia una dirección determinada y, al involucrar la dirección o sentido del movimiento, es una magnitud vectorial).
Matemáticamente, la velocidad es calculada como el cociente entre el desplazamiento que realizó un cuerpo y el tiempo total que le llevó realizarlo.
[tex]velocidad=\frac{desplazamiento}{tiempo}[/tex]
En este caso, sabes que:
distancia= desplazamiento= 10 mtiempo= 5 sReemplazando obtenes que la aceleración es:
[tex]rapidez=\frac{10m}{5 s}[/tex]
rapidez= 2 [tex]\frac{m}{s}[/tex]
y la velocidad es:
[tex]velocidad=\frac{10m}{5s}[/tex]
velocidad= 2 [tex]\frac{m}{s}[/tex] hacia la derecha.
Entonces la velocidad es 2 [tex]\frac{m}{s}[/tex] hacia la derecha, mientras que la rapidez es 2 [tex]\frac{m}{s}[/tex].
what do humming birds eat? and how do they get their food?
which characteristic is related to kinetic energy but not potential energy.
A. an objects mass
B. an objects speed
C. an objects shape
D. an objects height
Answer:
Option (D)
Explanation:
how we will solve this question?
36.45cL=______=μL
Answer:
0.364
I believe... Good luck!
Which choice is not an example of a molecule? O3 NCl3 F H2O2
Answer:
The answer is F
Explanation:
F stands for Fluorine, which is an element and consists of one atom.
Answer:
f
Explanation:
i took quiz