How many atoms are in 0.580 moles of CO2?
Answer:
[tex]1.05x10^{24}atoms[/tex]
Explanation:
Hello!
In this case, according to the definition of the Avogadro's number, it is possible to realize that one molecule of CO2 contains 3 moles of atoms, one of carbon and two of oxygen, thus, we have:
[tex]0.580molCO_2*\frac{3mol\ atoms}{1molCO_2} =1.74mol\ atoms[/tex]
Then, we use the Avogadro's number to obtain:
[tex]1.74mol\ atoms*\frac{6.022x10^{23}atoms}{1mol\ atoms} \\\\1.05x10^{24}atoms[/tex]
Best regards!
What happens to matter that is used up during photosynthesis?
It retains its form and mass.
It retains its form but increases in mass.
It changes to a new form of matter with less mass.
It changes to a new form of matter with the same mass.
Answer:
I am almost positive that it is D. I might be incorrect do i appoligise if i am.
Explanation:
Which upgrade to a school will most likely reduce the school's consumption of
nonrenewable resources?
Answer: if they use solar collection panels
Explanation:
Help me please (btw I live in the U.S)
Answer:
I live in the USA so the questions have been answered to reflect that accordingly.
1. The letter which represents summer where I live is Letter C
Explanation:
Letter C represents the June solstice which usually takes place between June 20 and June 21.
2. The letter which represents winter where I live is letter A.
Explanation:
Letter A represents the December solstice. Another name for this is Winter Solstice. This usually takes place in December for those living in the Northern Hemisphere like me. It is projected that this will take place on Tuesday, 21 December 2021.
Another name for this is Northern Hemisphere Winter Solstice as it marks the first day of winter.
3. The correct seasons for June Solstice are:
Northern Hemisphere: Summer Solstice
This projected to occur on Sunday, 20 of June 2020. It will be characterized by 1 hour of twilight and approximately 10 hours each of daylight and night time.
4. Southern Hemisphere: Summer solstice
This is anticipated on Tuesday, 21 December 2021. It will also be characterized by 1 hour of twilight and approximately 10 hours each of daylight and night time.
5. Northern Hemisphere: Autumnal (Fall) Equinox
6. Southern Hemisphere: Spring (Vernal) equinox
7. December Solstice - Northern Hemisphere: Winter Solstice is the Day of the Year with the shortest amount of sunlight
8. December Solstice - Southern Hemisphere: Summer Solstice. This is the day of the year with the longest amount of sunlight
9. March Equinox - Northern Hemisphere: Spring (Vernal) Equinox. This is the start of spring.
10. March Equinox - Southern Hemisphere: Autumnal (Fall) Equinox. This is the start of Fall.
Cheers!
What are the differences between proton, neutron, and electron
g A and B are both non-volatile molecular compounds. Substance A has a greater molar mass than substance B. If 50 g of substance A are dissolved in 250 g of water in one beaker, and 50 g of substance B are dissolved in 250 g of water in another beaker, then which ONE statement below will be true? A) the vapor pressure of solution A will be lower than the vapor pressure of solution B. B) the solution of A will freeze at a lower temperature than the solution of B. C) the two solutions will have the same vapor pressure. D) the boiling point of solution A will be lower than the boiling point of solution B. E) the solution of A will have a higher osmotic pressure than the solution of B.
Answer:
The correct answer is - option D. the boiling point of solution A will be lower than the boiling point of solution B
Explanation:
Colligative properties such as a decrease in the freezing point of the solution, increase in the boiling point of substance, decrease in Lowering of vapor pressure, and other properties depend upon the number of molecules only.
In the given solution the equal amount of two solutions are mixed that is 50 grams however due to the difference in the molecular mass so the atoms present in both solution A and B will be different. It is known that the number of atoms of a substance is inversely proportional to the molecular mass of the particular substance.
As it is given that Solution B has a low molecular mass which means it has a high number of atoms that means its boiling point will be higher than solution A.
Physical or Chemical change?
Answer: Chemical Change
Explanation:
because it probably doesnt change the physical anatomy of the object only the atoms/ molecule relations
The reaction A→B is to be carried out isothermally in a continuous-flow reactor. Calculate the PFR volume to consume 99% of A (CA = 0.01CA0) when the entering molar flow rate is 5 mol/h (assume pure A), the volumetric flow rate is constant at 10 dm3 /h and the rate is: -rA=3CA 2 [ dm3 /mol•h]
Answer:
Explanation:
From the information above:
The equation for the reactor volume of CSTR is given by the formula:
[tex]V = \dfrac{C_{Ao}V_o - C_A V_o }{-rA}[/tex]
[tex]V = \dfrac{C_{Ao}V_o (1 - 0.01)}{KC_A^2}[/tex]
The reaction rate of A is:
[tex]-r_A = kC_A^2[/tex] and k = 3 dm³/mol.h
replacing the values in the above equation to solve for v;
∴
[tex]V = \dfrac{(0.5 \ mol/dm^3) (10 \ dm^3/h) (1 - 0.01)}{ ( 3 \ dm^3/mol.h) (0.01 \times 0.5 \ mol/dm^3)^2}[/tex]
V = 66,000 dm³
Thus, the reactor volume of CSTR is 66000 dm³
Taking the differential mole balance equation for PFR is as follows:
[tex]\dfrac{d(C_AV_o)}{dV} = -r_A[/tex]
[tex]\dfrac{d(C_AV_o)}{dV} = Kc^2A[/tex]
Taking the integral between initial and final concentrations;
[tex]\dfrac{v_o}{k} \int ^{C_A}_{C_{Ao}} \dfrac{dC_A}{C^2A}= - \int ^V_o \ dV[/tex]
[tex]V = \dfrac{V_o}{K} \Big [\dfrac{1}{C_A}- \dfrac{1}{C_{Ao}} \Big ][/tex]
replace the values in the above equation;
[tex]V= \dfrac{(10 \ dm^3/h) }{(3 \ dm^3/mol.h)}\Big [ \dfrac{1}{0.01(0.5 \ mol/dm^3)} - \dfrac{1}{0.5 \ mol/dm^3} \Big ][/tex]
[tex]\mathbf{V = 66 0 \ dm^3}[/tex]
Thus, the reactor volume of PFR is 660 dm³
What happens to bromine on a molecular level when it is a gas but is then cooled to a liquid?
it is cooled to a liquid
How does latitude affect water temperature? Choose ALL that apply Lesson 2.05 none of the choices Temperatures are greatest at low altitudes because of the proximity to the equator As you move to higher latitudes approaching the poles, the temperature decreases. Temperatures are lowest at low altitudes because of the proximity to the equator
Answer:
I think it's option 3 (From top to bottom)
Explanation:
When the water is at a higher altitude there's only about 40 percent heat that the equator does.
How many elements are present in the compound RbMnO4?
If you travel through a city and find that you travel 5 km in 30 minutes, you could say that your constant speed is 6 km/h. is it true of false
Answer:
False.
Explanation:
(5 kilometers / 30 minutes), you could then say that in 60 minutes (one hour) you would be traveling at (10 kilometers / 60 minutes)...
Therefore, it is unlikely that you would be traveling at (6 kilometers / hour), so the answer should be... False.
The night sky is filled with images of wild animals. Which animal is the circled constellation named after?
scorpion
serpent
snake
salamander
A group of stars connected by lines is circled and labeled Saturn.
Answer:
ccc
Explanation:
Answer:
A
Explanation:
trust
1. I am a vertebrate
2. I can sprint up to 43 miles per hour
3. Although I have wings, I am flightless
4. I am a large animal that also lays very large eggs
Answer:
ostrich??????????????????
Based on the type or types of intermolecular forces, predict the substance in each pair that has the higher boiling point Match the words in the left column to the appropriate blanks in the sentences on the right. Make certain each sentence is complete before submitting your answer Reset Help stronger dispersion forcesG Given the molecules propane (C3Hs) and n-butane (C4H10), Г- has the higher boiling point mainly due to n-butane (C,H Given the molecules diethyl ether (CH3 CH2OCH2 CHs) and 1-butanol (CH3 CH2CH2 CH2OH) higher boiling point mainly due to 1-butanel CH,CH, CH,CH,OH) diethyl ether (CH CH,OCH CH, has the propane (C, H ts greater melar mass
Answer:
C4H10 has a higher boiling point due to stronger dispersion forces
1-butanol has the greater boiling point mainly due to hydrogen bonding influences
Explanation:
If we consider propane and n-butane, we discover that they are both alkanes. However, the magnitude of dispersion forces in alkanes depends on the length of the carbon chain. The greater the length of the carbon chain is greater in n-butane than in propane. The greater the chain length, the greater the magnitude of dispersion forces and the greater the boiling point. Hence, n-butane has a higher boiling point than than propane.
Also, if we compare the boiling points of 1-butanol to that of diethyl ether, we will discover that 1-butanol has a higher boiling point mainly due to intermolecular hydrogen bonding influences.
What is the answer for number 9 in the Half-life gizmo activity B.
Which bond would require more energy to break apart? (Short bond or Long bond). Explain
a) longer bond. because the charges are further apart
b) shorter bond. because the charges are closer together
c) shorter bond. because the charges are both positive
d) longer bond. because the charges are closer together
Answer:
shorter bond, because charges are close apart
Explanation:
shorter the bond length more is the energy required to break the bond for example if you take three pencils of different sizes one longer One medium sized One Shot sized if you try to break them the longer pencil will break much faster than the other two because the greater the length the lesser the strength the lesser energy you need to apply to break them apart ...
hope you understand
383.2 K to degrees Celsius
Answer: 110.05
Explanation: i dont know i looked it up
Mercury is the only metal that is a liquid at room temperature. When mercury vapor is inhaled, it is readily absorbed by the lungs, causing signifiant health risks. The enthalpy of vaporization of mercury is 59.1 kJ/mol. The normal boiling point of mercury is 357°C. What is the vapor pressure of mercury at 43°C? Assume the enthalpy of vaporization does not depend on temperature.
Answer:
P = 0.0166 mm Hg
Explanation:
To solve this question, we need to use the Clausius Clapeyron equation, which is a commonly used expression to calculate vapour pressure at a given temperature. We have the enthalpy of vaporization of the mercury, so, let's write the equation:
Clausius Clapeyron equation:
Ln (P₂ / P₁) = (-ΔHv / R)(1/T₂ - 1/T₁) (1)
Where:
R: universal constant of gases (8.314 J / K.mol)
P₂: Vapour pressure at 43°C (or 316 K)
P₁: Pressure of mercury at the boiling point (1 atm)
T₂: temperature at 43 °C
T₁: Boiling point of mercury (357 °C or 630 K)
As we are given the boiling point of the mercury, we can safely assume that the pressure at this point is 1 atm, becuase remember that when a sustance boils, is because it's internal pressure has reached the atmospherical pressure of 1 atm. With this clear, all we just need to do is solve for P₂. We are going to do this very slowly so you can understand the process. First let's replace the given data:
Ln (P₂ / 1) = (-59100 J/mol / 8.314 J / K.mol) (1/316 - 1/630)
Ln P₂ = -7108.49 * (3.16x10⁻³ - 1.59x10⁻³)
Ln P₂ = -7108.49 * (1.51x10⁻³)
Ln P₂ = -10.7338
P₂ = 10⁽⁻¹⁰°⁷³³⁸⁾
P₂ = 2.18x10⁻⁵ atm
We can express this value in mm Hg and it will be:
P₂ = 2.18x10⁻⁵ * 760
P₂ = 0.0166 mm HgHope this helps
Astronomers send probes to other planets to take pictures of their surfaces. An astronomer thinks that briny water flows on Mars because he noticed certain features in one picture of Mars. Which method did the astronomer
use to form this hypothesis?
1.reading scientific literature
2.making careful observations
3. analyzing a natural experiment
4. conducting a controlled experiment
Answer: the answer is B
Explanation:
To determine the freezing point depression of a LiCl solution, Toni adds 0.317 g of LiCl to the sample test tube along with 20.5 mL of distilled water. Determine the concentration, in molality, of the resulting solution. MW of LiCl is 42.394 g/mol Density of H2O is 0.9982 g/mL
Answer:
0.365 m
Explanation:
The definition of molality is:
molality = moles of solute / kg of solventFirst we calculate the moles of the solute, LiCl. We do so using its molar mass:
0.317 g ÷ 42.394 g/mol = 7.48x10⁻³ molThen we calculate the mass of the solvent, water. We do so using its density:
20.5 mL * 0.9982 g/mL = 20.5 g20.5 g / 1000 = 0.0205 kgFinally we calculate the molality of the solution:
7.48x10⁻³ mol / 0.0205 kg = 0.365 mwhat do you think will happen if there is no coal.
Answer:
If coal and petroleum will get exhausted it will be very difficult for us to transport because most vehicles depends on petroleum, Transport on Earth will became complicated, and if coal will get exhausted we will lose an unique fossil fuel. Coal is used in various domestic and industrial purposes.
which statement is true about both groundwater and surface water?
A. Rainwater forms both the groundwater and the surface water
B. The water levels of both the groundwater and the surface water stay stable
C. Both the groundwater and the surface water are purified as they soak through the soil layers
D. The groundwater and the surface water together form a drainage basin
The statement which is true about both groundwater and surface water is that the groundwater and the surface water together form a drainage basin.
What is ground water?
Ground water is the type of water which is present below the surface of rock and between spaces in soil pores .Thirty percent of the available fresh water is present in the form of groundwater.
Groundwater is discharged from the surface naturally in the form of springs and seeps and can also exist in the form of oases or wetlands.It is used for various purposes like for agriculture, municipal and industrial uses. They are used by constructing wells .
The study of movement and distribution of ground water is called hydrogeology or even groundwater hydrology.It is a cheaper source of water and is less prone to pollution as compared to surface water.
Learn more about ground water,here:
https://brainly.com/question/14869307
#SPJ2
a rock that is pushed down a hill represents both potential and kinetic energy. which statement best represents the energy transformation involved in this scenario
Explanation:
kinetic energy Increases due to gravity. A rock being pushed down a hill increases in speed, due to gravity, what goes up must come down....
Dogs and shrews are both members of this class:
O carnivora
O mammalia
O chordata
O canidae
Hi pls help me if you know the answer pls ASAP thank you
Explain how the processes of photosynthesis and respiration are related to each other
Answer:
Explanation:
The end product of Photosynthesis is glucose that is used in cellular respiration to make ATP. The glucose is then turned back into carbon dioxide, which is used in photosynthesis. While water is broken down to form oxygen during photosynthesis, in cellular respiration oxygen is combined with hydrogen to form water.
I need help with the bottom two pls The first answer I will mark brainliest
Answer:
I dunno, what is the answer
Explanation:
Part A
Summarize your research, and describe the attributes of the savanna.
Answer:
Savanna regions have two distinct seasons - a wet season and a dry season. There is very little rain in the dry season. In the wet season vegetation grows, including lush green grasses and wooded areas.
Savannas are grasslands found in Africa, Australia, South America, and India. The climate is warm or hot. Savannas experience both dry and rainy seasons. Each year, savannas receive about 20 to 50 inches of rain in a span of six to eight months. The other months are dryer. There’s also a threat of wildfires because of the severe dryness during these months. Grasslands are true to their name because their vegetation is mostly grass. Savannas are home to a wide range of animals, including different species of beetles and insects, which many creatures consume. Squirrels, mice, elephants, gazelles, and antelopes are the plant-eating animals that live in the savanna. Hyenas, lions, and leopards are some of the meat-eating animals in these areas. Some of the nonliving components of the system include very porous soil that allows water to drain easily.
Name the following lonic Compounds using the lonic naming rules. Remember, place the metal's name
first, followed by the non-metal element, replacing the ending with "-ide"
1.Caci,
2.LIBr
I
3. Bes
4. LIF
5. K Se
6. Sr,P2
7. Baci
8. Feo
9. Fe,
10. CUN
11. Cun,
Please help meeee