An acid is able to produce ions in the aqueous solution because polar H-A bond break due to the attraction between H atoms and the O atoms of water.
In Chemistry, a substance that produces hydrogen ions along with a conjugate base is called acid.
After dissolving in water, the constituents of acid break apart forming hydrogen ions or H+ ions which react with water molecules to form hydronium ions i.e. H3O+. Thus making the solution more acidic.
The general formula of an acid shows that it contains a halogen atom, an oxygen atom and hydrogen atoms.
For example, the dissociation of H2SO4 in water produces H+ ions and SO4- ions.
H2SO4 ⇄ H+ + SO4-
In the absence of water acids can not dissociate.
To put it simply, acids release h+ ions only when they are added to an aqueous solution.
If you need to learn more about acid click here:
https://brainly.com/question/26855500
#SPJ4
why is energy released when imfs form between molecules as they approach each other? group of answer choices making imfs lowers the energy of electrons making imfs raises the energy of electrons
The energy released when IMF'S formed between the molecules as they approach each other because making IMF'S lowers the energy of electron and increase the level of stability.
Atoms tends to stabilize when they form IMF's , ans release energy in the process. energy is released because of the greater level of stability associated with low energy.
Energy is released in the chemical bond formation because bonds are in stable configuration. .the change in enthalpy will be negative for the process.the reaction is exothermic.In opposite breaking of bond required energy.
Thus ,energy is released when IMF'S formed between molecules as they approaches each other because they acquire greater level stability with low energy levels.
To learn more about IMF'S here
https://brainly.com/question/497701
#SPJ4
a 50. l rigid container with a pressure of 2.24 atm initially has 0.58 moles of h2(g) and 0.42 moles of f2(g). the chemical reaction h2(g) f2(g) --> 2 hf(g) then went to completion to as great an extent as possible. what is the final pressure of the container, assuming temperature was the same before and after reaction and all gases acted ideally?
Assuming temperature was the same before and after reaction and all gases acted ideally, the final pressure of the container is 2.24 atm.
What is a gas’s pressure?A gas’s pressure is defined as the strain it causes on the container’s walls. When you blow air into a balloon, the envelope opens because the pressure of the air molecules inside the balloon is higher than on the outside.
The direction in which mass flows is calculated while determining pressure.
What does gas pressure mean in plain ?The force created when gas particles collide with the wall of their container is known as gas pressure. Force is applied to a region to create pressure.
The force that a gas applies to a particular area is known as gas pressure.
CalculationAs it is a rigid container, so volume will not change.
So V and T are fixed.
Initially total moles = 0.58+0.42
n1 = 1 mole
H2 + F2 = 2HF
We have total moles = 0.84 +0.16 after reaction
= 1mole
n2 = 1 mole P1 = 2.24atm
so P1/n1 = P2/n2
⇒ 2.24/1 = P2/1
⇒ P2 = 2.24 atm
To know more about pressure, visit:
https://brainly.com/question/356585
#SPJ4
Calculate the energy of blue light(425nm). What is the energy of a mole of blue photons?
The energy of a mole of blue photons is determined as 4.68 x 10⁻¹⁹ J.
What is the energy of a photon?The amount of energy carried by a photon is directly proportional to the photon's electromagnetic frequency and inversely proportional to the wavelength of the photon.
E = hf
E = hc/λ
where;
f is the frequency of the blue lightλ is wavelength of the blue light = 425 nmc is the speed of the blue lighth is Planck's constantThe energy of a mole of blue photons is calculated as follows;
Substitute the given parameters and solve for the energy of the photon.
E = (6.626 x 10⁻³⁴ x 3 x 10⁸) / (425 x 10⁻⁹)
E = 4.68 x 10⁻¹⁹ J.
Thus, the energy of a mole of blue photons is determined as 4.68 x 10⁻¹⁹ J.
Learn more about energy of a photon here: https://brainly.com/question/15946945
#SPJ1
What is the Configuration Notation for Au? Show work!!
Answer:
[Xe] 4f14 5d10 6s1
Explanation
1s2 2s2 2p6 3s2 3p6 3d10 4s2 4p6 4d10 5s2 5p6 4f14 5d10 6s1
bc the composition of gold is very packed full of multiple other elements.
suppose 10g of liquid water at 10c is placed in an insulated cup. if a 30g piece of metal at 131c is placed in the water and brought to equilibrium at 20c, what type of metal is it
The correct option is (c) Gold.
The Specific Heat of the given metal is to be calculated and then compared to Specific Heat of respective metals in the options.
What is Specific Heat?The amount of heat per unit mass needed to raise the temperature by one degree Celsius is known as the specific heat. The formula below, where c is the specific heat, is typically used to explain the relationship between heat and temperature change. If a phase shift occurs, the relationship is invalid because the temperature is unaffected by the heat added or lost during a phase transition.The unit "calorie" can also be used to measure specific heat, which is often measured in Joules per gram per degree Celsius (J/kg °C).Every substance has a unique specific heat capacity, a number that characterizes its chemical feature.
Q=mcΔT
where,
Q= heat added (Joules)
m= mass (grams)
c= specific heat (J/ kg °C)
ΔT= change in temperature (T₂(final) – T₁(initial))
Solution:mass of water, m₁ = 10 g = [tex]10^-2[/tex] kg
mass of metal, m₂ = 30 g = 3× [tex]10^-2[/tex] kg
Initial temperature of water, T₁ = 10° C
Initial temperature of metal, T₂ = 131° C
Final Equilibrium Temperature, T= 20°C
So, Heat gained by water = Heat loss by metal
⇒ m₁ c₁ (T - T₁) = m₂ c₂ ( T₂ - T) [ c₁ and c₂ are Specific Heat of water and metal respectively] [ c₁ = 4200 J/kg °C ]
⇒ [tex]10^-2[/tex] × 4200 × ( 20 - 10) = 3 × [tex]10^-2[/tex] × c₂ × (131 - 20)
⇒ c₂ = ( [tex]10^-2[/tex] × 4200 × 10) / ( 3× [tex]10^-2[/tex] × 111)
⇒ c₂ = 126.126 J/kg °C
The Specific heat of metal is 126.126 J/kg °C which is equivalent to the Specific heat of Gold.
So, the metal is Gold.
To learn more about Specific heat visit:
https://brainly.com/question/11297584
#SPJ4
The complete question is:
"suppose 10g of liquid water at 10°C is placed in an insulated cup. if a 30g piece of metal at 131°C is placed in the water and brought to equilibrium at 20°C, what type of metal is it ?"
a.silver
b.copper
c.gold
d.aluminium
e.tungsten
Downwelling is the process that moves cold, dense water from the ocean surface to the seafloor near the polar regions. how can downwelling affect the ocean water around the poles? it brings warm, nutrient-rich water to the ocean floor. it brings water that is low in oxygen to the ocean surface. it brings low salinity water to the ocean surface. it brings oxygen-rich water to the ocean floor.
Donwelling is the process that moves cold, dense water from the ocean surface to the seafloor near the polar regions. Downwelling affect the ocean water around the poles as it brings oxygen - rich water to the ocean floor.
Downwelling occurs when the water on the surface of the sea becomes denser than the water beneath it and so it sinks. ocean water get denser when it gets cola or saltier.Most downwelling happens at the poles.
I f the air was warmer at the poles, then water wold be warmer too.so, without cold water there would be little downwelling.Oxygen in deep sea would have used up and without strong downwelling , there is no way to replenish oxygen.
Hence, Downwelling affect the ocean water around the poles as it brings oxygen - rich water to the ocean floor.
To learn more about Downwelling here
https://brainly.com/question/5350255
#SPJ4
A salt solution that contains 0.90 g of NaCl in 100.0 mL of solution
Answer:
es 200.0ml
Explanation:
estabien easy
You are given a block of metal that has a 'known' mass of 110. 2 you are given a block of metal that has a 'known' mass of 110. 2 grams. You measure its mass three times and get the following mass readings: 100. 2 g, 100. 1 g 100. 3g. A. What was your average mass?
If a given block of metal has a known mass of 110.2 g, and the mass is measured three times to get the following readings -100.2 g, 100.1 g, 100.3 g, then the average mass will be 100.2 g.
Mass is a quantity which is dimensionless. It represents amount of matter in any object. Average mass is known as the total sum of given masses divided by the number of times mass is measured.
Mathematically, average is the sum of all results in a sample divided by the total number of the items in sample.
Average mass = Sum of all the mass
Number of results(mass)
Therefore,
Average mass = (100.2 + 100.1 + 100.3) g
3
Average mass = 300.6 g
3
Average mass = 100.2 g
To learn more about average mass,
brainly.com/question/13753702
#SPJ1
How to covert 265k to degrees Celsius
We'll be subtracting 273.15 from it.
(265 - 273.65)°C = -8.15°C
Calculate the average atomic mass for the unknown element. Round to
TWO decimal places.
Isotope
unk-39
unk-41
Relative abundance
93.12 %
6.88%
Atomic Mass
38.964 amu
40.962 amu
Answer: 39.13
Explanation: 39 x 93.12%=36.31
41 x 6.88%= 2.82
2.82+36.31= 39.13
At the end of the experiment you will be assessing the purity of your aspirin by measuring its absorbance at 525 nm. If the absorbance measurement is found to be 0. 040 then what is the % salicylic acid impurity in your aspirin?.
Answer:
The correct answer is 7.8 percent.
Explanation:
As mentioned in the given question, the absorbance (A) of the sample solution is 1.07. To find the concentration of aspirin, Beer's law is used, that is, A = ebc
Here, e is the extinction coefficient, which is equal to 139.322 M^-1cm^-1 as per the standard value for salicylic acid, b is the pathlength, which is equivalent to 1 cm. Now putting the values we get,
A = ebc
c = A / (eb)
c = 1.07 / (139.322 × 1)
c = 0.00768 M
Now to determine the percent salicylic acid in the sample, there is a need to compare the value of concentration determined with the concentration of aspirin given initially.
0.02 grams is the initial concentration of aspirin mentioned in the question. The molar mass of aspirin is 240 g/mol.
Therefore, the moles of aspirin will be,
0.02 / 240 = 8.33 × 10^-5 moles
The final volume of the diluted solution given is 10 ml or 0.01 liters.
The molarity of aspirin in the diluted solution will be,
c1 = 8.33 × 10^-5 / 0.01 = 8.33 × 10^-3 M or 0.00833 M
Now, the percent of salicylic acid in the product will be,
c1 - c / c1 × 100
(0.00833 - 0.00768) / 0.00833 × 100 = 7.8 %
I believe that's your answer
hope it helps you;)
The concept Beers law or Beer Lambert law is used to determine the percentage of salicylic acid impurity in your aspirin. The percentage of salicylic acid is 96.5 % percent.
What is Beer Lambert law?Beer-Lambert's law states that when a beam of monochromatic light passes through a solution of an absorbing substance, the rate of decreases of intensity of radiation with thickness of the solution is directly proportional to the intensity of incident radiation as well as the concentration of the solution.
The equation is:
A = ecx
Here, e is the extinction coefficient = 139.322 M⁻¹cm⁻¹
c = A / (ex)
c = 0.040 / (139.322 × 1)
c = 0.000287
Initial concentration = 0.02
Molar mass of Aspirin = 240 g/mol
Moles of Aspirin = 0.02 / 240 = 8.33 × 10⁻⁵
Final volume of the diluted solution = 0.01 L
Molarity of aspirin is:
c₁ = 8.33 × 10⁻⁵ / 0.01 = 8.33 × 10⁻³M or 0.00833 M
Percent of salicylic acid is:
c1 - c / c1 × 100
(0.00833 - 0.000287) / 0.00833 × 100 = 96.5 %
Thus the % of salicylic acid is 96.5 %.
To know more about Beer-Lambert's law, visit;
https://brainly.com/question/29434481
#SPJ2
Relative to other substances, water tends to resist changes in temperature. Why?.
Relative to the other substances, water tends to resist changes in temperature because water is highly cohesive. Its molecules tend to resist increases in their motion. When water is heated, some of the energy is used to disturb the hydrogen bonds between neighboring molecules.
Between water molecules, the hydrogen bonds gives water the ability to hold heat better than any other substances. When the temperature rises, the hydrogen bonds between water molecules breaks continuously to reform. It allows the overall temperature to remain stable, but increased energy is added to the system.
The tendency of water molecules to stay close to each other is due to the strong hydrogen bonding between the atoms. This strong hydrogen bond causes water to resist motion of molecules and remain at room temperature.
Specific heat of water is really high due to which water resist the temperature change. A lot of heat is required to move the water slightly and resist the temperature changes. Heat gets absorbed when the hydrogen bonds break.
Correct question is -
Relative to other substances, water tends to resist changes in temperature. Why?
1) Water is extremely dense, and like all dense materials, it can absorb a great deal of heat with a relatively small change in temperature.
2) Water is abundant. Large bodies of water resist changes in their temperature simply because they are massive objects.
3) Water is highly cohesive. Its molecules tend to resist increases in their motion. When water is heated, some of the energy is used to disturb the hydrogen bonds between neighboring molecules.
4) Water is highly adhesive. Pure water does not resist temperature change, but if water is bonded to other substances, molecules will tend to "stay put" and resist increases in their motion.
To learn more about water resistance,
brainly.com/question/8296512
#SPJ4
Can somebody please help me?
＼＼\٩(๑`^´๑)۶//／／
Explanation:
let's have a look at bohrs postulates to answer the question, (bohrs model was applicable only for hydrogen like species)
Electron revolves around the nucleus in a fixed circular orbit.The energy of electron revolving around nucleus doesn't change with time i.e. it have definite energy. The angular momentum of electron(mvr) is integral multiple of h/2π the electron may jump from one energy level to other by absorption or emission of energy.Now coming to your question,
Electrons can only orbit the nucleus in a fixed circular orbit.
Electrons prefer fo orbit in the shell which are close to nucleus or having less energy.
Each shell can only hold a specific number of electrons given by formula 2n² where n is the number of shell,
the 1st shell can hold 2n² = 2×1² = 2 electrons
the 2nd shell can hold 2×2² = 8 electrons
the 3rd shell can hold 2×3² = 18 electrons
An atom can gain or lose electrons to form an ion.
[tex]\sf \small \pink{Thanks }\: \green{for} \: \blue{joining} \: \orange{brainly } \: \red{community}![/tex]
two samples of sodium chloride were decomposed into their constituent elements. one sample produced 8.00 g of sodium and 12.3 g of chlorine, and the other sample produced 11.1 g of sodium and 17.1 g of chlorine.
These two samples of sodium chloride as provided in the question are in accordance with the law of definite proportion.
CalculationAccording to law of definite proportions, any provided chemical compound always contains its initial component elements in a fixed ratio, and it does not depend on its source and method of preparation.
So here in the first sample, we have
Mass of sodium = 8 g
n(Na) = 8/23
=0.347 mol
Mass of chlorine = 12.3g
n(Cl2) = 12.3/70.9
=0.173 mol
Thus, definite proportion = 0.173/0.347 ≈ 1:2
Then in the second sample,
Mass of sodium = 11g
n(Na) = 11/23
=0.478 mol
Mass of Chlorine =17.1g
n(Cl2) = 17.1/70.9
=0.241
Thus, definite proportion = 0.241/0.478 ≈ 1:2
Therefore, we see that in both of the samples, the proportion remains the same. Thus, both the samples follow the Law of definite proportion.
To know more about Law of definite proportion, visit:
https://brainly.com/question/28458716
#SPJ4
A 5. 0 l flask containing o2 at 2. 00 atm is connected to a 3. 0 l flask containing h2 at 4. 00 atm and the gases are allowed to mix. What is the mole fraction of h2? report your answer to two decimal places.
The mole fraction of hydrogen is 0.55.
The volume of oxygen = 5 litres
The pressure of oxygen = 2 atm
The volume of hydrogen = 3 litres
The pressure of hydrogen = 4 atm
The universal gas constant is R.
R = 8.31 J mol—¹ K—¹
The ideal gas equation is,
PV = nR T
The number of moles of oxygen is,
PV = nRT
[tex]n = \frac{ PV }{RT }[/tex]
[tex]n = \frac{2 \times 5}{8.31 \times 273} [/tex]
n = 0.004 moles
The number of moles of oxygen is 0.004 moles.
The number of moles of hydrogen is,
PV = nRT
[tex]n = \frac{ PV }{RT }[/tex]
[tex]n = \frac{4 \times 3}{8.31 \times 273} [/tex]
n = 0.005 moles
The number of moles of hydrogen is 0.005 moles.
The mole fraction of hydrogen is,
[tex]Mole \: fraction = \frac{ Moles \: of \: solute }{Total \: number \: of \: moles \: of \: solute\: and \: solvent}[/tex]
[tex]Mole \: fraction = \frac{0.005}{0.009} [/tex]
= 0.55
Therefore, the mole fraction of hydrogen is 0.55.
To know more about mole fraction, refer to the below link:
https://brainly.com/question/28344281
#SPJ4
Practice writing in scientific passive voice by summarizing chemical properties of the periodic table in your own words.
Your summarization should be at least three sentences long and refrain from using the first person.
The metals in the periodic table react with water to form bases, the nonmetals react with water to form acids while the metalloids have intermediate properties.
What is the periodic table?The periodic table is an arrangement of elements according to their increasing atomic numbers. The atomic number of an elements has to do with the number of protons in the atom as well as the number of electrons in the neutral atom of the substances.
We know that the periodic table is composed of the metals, the non metals and the metalloids. The metals are found towards the far left end of the periodic table and they have properties such as ability to liberate hydrogen when reacted with acids and the ability to tarnish when exposed to the atmosphere.
Towards the middle of the table, we have the metalloids whose properties are intermediate between those of the metals and the nonmetals. The nonmetals are known to dissolve in water to produce acids just as the bases react with water to produces bases. Some metals are amphoteric.
Learn more about the periodic table:https://brainly.com/question/11155928
#SPJ1
What do these two changes have in common sauce burning on a stove and jewelry tarnishing
The changes that are common between sauce burning on a stove, and jewelry tarnishing, which is a chemical change.
How to define chemical and physical changes?
Chemical Change-
Any alteration that produces new chemical substances with distinct properties is considered a chemical change. Chemical reactions involve the rearrangement and recombination of elements and compounds to create new substances. Examples of chemical changes are listed below:
BurningDigestionchemicals changing colorsTarnishingcompost rottingPhysical Change-
A substance is not destroyed or transformed into something new by physical changes. A substance can undergo physical changes that alter its shape, size, or phase. The constituents of an element or compound do not change during a physical change. Examples of physical changes are listed below:
Boiling waterChopping, Cutting, CarvingEvaporationFreezing, Melting, Condensation
To know more about chemical and physical changes, visit the given link:
https://brainly.com/question/20628019
#SPJ4
What is the difference between solubility and concentration?
Answer:
Solubility is typically a limit to how much solute can dissolve in a given amount of solvent. Concentration is the quantitative amount of solute dissolved at any concentration in a solvent.
Explanation:
What is the empirical formula for a compound composed of 0.0627 mol of carbon ( c ), 0.0209 mol of hydrogen ( h ), and 0.0418 mol of nitrogen ( n )? empirical formula:
(c) The figure below shows two alkane molecules.
Methane
HIC-H
HICIH
Methane
Hexane
Hexane
HHHHHH
LIITIT
H-C-C-C-C-C-C-H
IITTIT
H. H HHHH.
The table below shows the melting points and boiling points of methane and
hexane.
Melting point in Boiling point in
°C
°C
-183
-95
-162
69
Compare the structure and properties of methane and hexane.
(1)
Methane is a gas which is colourless and and odorless. It is a hydrocarbon with formula CH₄. Where as Hexane is an alkane containing 6 carbon atoms. Its molecular formula is C₆H₁₄. For the structure refer the figure given below.
Coming to the properties there are both physical and chemical properties.
Hexane is a colourless volatile liquid and undergoes combustion reaction, being a higher hydrocarbon it undergo thermal cracking.
It is commonly used as solvents, biodiesel production etc. Boiling point is 69⁰C and melting point is 95⁰C.
Methane is a gas which is colourless and odorless. It is lighter in air, slightly soluble in water, it is flammable. boiling point is -162⁰C and melting point is -183⁰C.It is used as fuel, it is used in explosives.
Learn more about alkanes here https://brainly.com/question/1621859
#SPJ9
you decide it is time to clean your pool since summer is quickly approaching. your pool maintenance guide specifies that the chlorine, cl2 , concentration of the pool should be between 1 and 3 ppm . in order to determine if your pool is safe to swim in, you send a sample of pool water to a chemist for analysis of the cl2 content. the chemist reports a chlorine concentration of 3.09×10−5 m . convert the concentration of cl2 to parts per million ( ppm ).
The concentration of Cl₂ is: 2.19ppm
What is molarity and ppm?The concentration of a chemical solution is expressed in molarity and parts per million (ppm), two units of measurement. The molecular or atomic mass of the solute is comparable to one mole. Parts per million, naturally, refers to the quantity of solute molecules in every million parts of a solution.
How to convert molarity into ppm?1ppm = 1mg in 1000g solution
Given chlorine concentration = 3.09X10⁻⁵M
The atomic mass of chlorine is 35.5g/mol
For Cl₂, atomic mass = 35.5*2=71g/mol
W= 3.09X10⁻⁵ X 71 = 2.19 X 10⁻³g Cl₂ per liter solution
So, W= 2.19mg/lit solution
Now, let us assume density of solution = 1
Therefore, concentration of Cl₂ = 2.19ppm
To learn more about molarity and ppm, visit the link:
https://brainly.com/question/13565240
#SPJ4
A scientist conducted an experiment to determine how the amount of salt in a body of water affects the number of plants that can live in the water. In this experiment the dependent variable is
The dependent variable in the experiment conducted by the scientist to determine the amount of salt in a body of water that affects the number of plants that can live in the water is the water.
That is, water is the dependent variable in the experiment.
Generally, a variable that is subject to change or manipulated in a scientific study is called the independent variable. The changes made in this independent variable may lead to a change in another variable called the dependent variable.
The Dependent variable is the variable that is affected in the study which is measured in the experiment. As in the case with the experimental study, the independent variable is the amount of salt as it can be manipulated by the scientist whereas the dependent variable is the water whose tendency is affected by the manipulation of the amount of salt so that the number of plants affected could be calculated easily.
Thus, the dependent variable is water and the independent variable is salt.
To learn more about dependent and independent variable, click below
https://brainly.com/question/1235879
#SPJ9
the value of δg'° for the conversion of 3-phosphoglycerate to 2-phosphoglycerate is 4.4 kj/mol. if the concentration of 2-phosphoglycerate at equilibrium is 1.25 mm, what is the concentration of 3-phosphoglycerate?
If the concentration of 2-phosphoglycerate at equilibrium is 1.25 mm, the concentration of 3-phosphoglycerate is 0.00034 molar.
CalculationΔG° for the conversion of 3-phosphoglycerate to 2-phosphoglycerate (2PG) is + 4.40 kJ/mole.
We know ΔG° = -2.303RTlogK
Where R = Universal gas constant = 8.314 x 10^-3 kj mole^-1 k^-1
T = Kelvin temperature = 25 + 273 = 298 K
⇒ log K = (4.4)/ -2.303 x 8.314 x 10^-3 x 298
⇒ log K = -0.77
⇒ K = 0.16
3-phosphoglycerate → 2-phosphoglycerate
K = [ 2-phosphoglycerate] / [3-phosphoglycerate]
Here K is an equilibrium constant.
0.16 = x / (2.15 x 10^-3)
x = 0.16 x 2.15 x 10^-3
x = 0.00034 molar or 0.344 mM at 25°C
To know more about Concentration, visit:
https://brainly.com/question/10725862
#SPJ4
Which sources are reliable? Check all that apply.
A.an article discussing mineral resources written by the United States Geological Survey
B.a blog discussing sources of alternate energy written by a high school student
an advertisement for guided hikes and tours in Camping magazine
C.a study describing clinical trials of a new medication in the Journal of Medicinal Chemistry
D.an entry about common uses of metals in an encyclopedia that can be edited by the general public
Answer: it's B And D
Explanation:
water’s molar mass is 18.01 g/mol. the molar mass of glycerol is 92.09 g/mol. at 25°c, glycerol is more viscous than water. which substance has the stronger intermolecular attraction? glycerol because it has a larger molar mass
Glycerol has the stronger intermolecular attraction because it has larger molar mass and more viscous than water.
Viscosity is the measure of resistance of fluid to flow. Fluid can be a liquid or a gas.
Glycerol is more viscous in nature because of the length of the chain and many possibilities for hydrogen bonding between the molecules.
With great hydrogen bonding, the intermolecular attraction is stronger in glycerol. Viscosity and molar mass are directly related to each other, i.e., viscosity increases with the molar mass.
Glycerol contains three hydroxyl groups per molecule, and water contains one hydroxyl molecule due to which hydrogen bonding is more in glycerol than in water which makes glycerol a syrupy, viscous fluid resulting in the stronger intermolecular attraction.
To learn more about intermolecular attraction,
https://brainly.com/question/11578749
#SPJ4
can you actually measure the mass of atoms using a scale like the one in this lab? explain
Answer:
you can't weigh an atom on a traditional scale. Instead, physicists for over a century have used an instrument called a mass spectrometer.
Which of these is a molecule and not a compound?
Oxygen
Water
Ammonia
Carbon Dioxide
Among the following, oxygen is a molecule and not a compound.
What is the difference between molecule and compound?Molecule is a group of two or three atoms which are held by chemical bonds.Compound is a substance composed of two or more atoms which are held together chemically in a fixed proportion.
Hence all molecules are not compounds but all compounds are molecules.Structure of molecule comprises of group of atoms which are held together by a strong force.
Thus,oxygen is a molecule as it is composed of 2 oxygen atoms while water, ammonia and carbon dioxide are compounds as they are composed of two-four atoms.
Learn more about difference between molecules and compound here:
https://brainly.com/question/21983682
#SPJ1
An iceberg has a volume of 7670 cubic feet. What is the mass of the ice (in kg ) composing the iceberg?
An iceberg has a volume of 7670 cubic feet. The mass of the ice (in kg) composing the iceberg is 0.0002483 kg
The volume of iceberg = 7670 cubic feet.
Density of ice = 0.917 g/cm[tex]^{3}[/tex]
so, Density is given by,
Density = mass / volume
density of ice = (0.917 /1000) kg/cm[tex]^{3}[/tex]
1 cm[tex]^{3}[/tex] = 0.00003531 ft[tex]^{3}[/tex]
therefore,
0.000917 kg/cm[tex]^{3}[/tex] = (0.000917 × 0.00003531 ) kg/ft[tex]^{3}[/tex]
= 0.0000000324 kg/ft[tex]^{3}[/tex]
now,putting the values in formula , we get,
Density = mass / volume
mass = density × volume
= (0.0000000324 × 7670 ) kg
= 0.0002483 kg
Hence,An iceberg has a volume of 7670 cubic feet. The mass of the ice (in kg) composing the iceberg is 0.0002483 kg.
To learn more about Density here
https://brainly.com/question/15164682
#SPJ1
Be sure to answer all parts. Compounds a and b are isomers having molecular formula c5h12. Heating a with cl2 gives a single product of monohalogenation, whereas heating b under the same conditions forms three constitutional isomers. What are the structures of a and b?.
Neo-pentane represents the Compound A while compound B is n-pentane.
After careful consideration we can say that compounds A and B are alkanes and also isomers of pentane. In chemistry, Isomers are defined as compounds having same empirical molecular formula but different structural formulas due to varying arrangement of atoms.
Now, as per the question statement, compound A gives a single monochlorination product upon heating with the molecule of chlorine i.e. Cl2 showing that the molecule is extremely symmetric. This molecule must be neo-pentane. Refer to image 1.
Similarly, Compound B forms 3 constitutional isomers after undergoing monochlorination. This compound must be n-pentane since three are 3 different types of carbon atoms in the structure. Refer to image 2.
If you need to learn more about neo-pentane click here:
https://brainly.com/question/20815247
#SPJ4
Neopentane makes up component A, while n-pentane makes up compound B.
First and foremost, it is important to understand that compounds A and B are isomers and alkanes of pentane. Compounds with distinct structural formulas but the same molecular formula are known as isomers.
When heated with Cl2, compound A now produces a single monochlorination product, demonstrating the molecule's high degree of symmetry. Neopentane must be this chemical (image 1).
Upon monochlorination, compound B divides into three constitutional isomers.
A halogen atom is replaced with another substance in a process known as halogenation, where the halogen atom eventually becomes a component of the new substance or compound. In general, one or more halogens are typically added to the chemical during the halogenation reaction.
Learn more about halogens:
https://brainly.com/question/14191541
#SPJ4
Classify the substances below into groups of your own design based on their
properties. With your teacher's permission, use the internet to research any
material that you do not know. Explain your classification. sc.8.P.8.4
Air
Water
Wax
Aluminum
Nails
Sugar
Bronze
Wood
Milk
Baking Soda
Titanium
Gold
Gasoline
Dry Ice
Vinegar
Graphite
Silver
Match
Salt
Bleach
The substances can be classified into pure and impure substances as follows:
Pure substances:
WaterAluminumSugarBaking SodaTitaniumGoldDry IceVinegarGraphiteSilverSaltImpure Substances:
AirBleachMatchGasolineWoodMilkBronzeNailsWaxWhat are the classifications of matter?Matter is anything that has mass and occupies space.
All substances are made of matter.
Matter can be classified into two based on the nature of the substance as follows:
Pure substances, and Impure substances.Pure substances are further classified into elements and compounds.
Impure substances are mixtures of two or more substances.
Based on the above, the given substances can be classified into pure and impure substances as follows:
Pure substances:
WaterAluminumSugarBaking SodaTitaniumGoldDry IceVinegarGraphiteSilverSaltImpure Substances:
AirBleachMatchGasolineWoodMilkBronzeNailsWaxLearn more about pure and impure substances at: https://brainly.com/question/19958556
#SPJ1